Transcript
MORNING™ ABOVE-COUNTER SINK VITREOUS CHINA MORNING™ ABOVE-COUNTER SINK ❏ 0670.000 •Versatile sink shape for above-counter installation • Made from vitreous china • Integral faucet deck for single-control faucet mounting • Center drain outlet without overflow ❏ 0670.312 Same as above with front overflow Nominal Dimensions: 451mm (17-3/4") Round Bowl sizes: 381mm (15") round 108mm (4-1/4") deep FINISHED WALL OR SPLASHBACK 35mm (1-3/8) DIA. HOLE Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2M for Vitreous China Fixtures OPTIONAL 86mm (3-3/8) 225mm (8-7/8) C/L To Be Specified: ❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver ❏ Fawn Beige ❏ Black ❏ Faucet*: ❏ Faucet Finish: ❏ Supplies: ❏ 1-1/4" Trap: COUNTERTOP CUTOUT 330mm (13) DIA. 451mm (17-3/4) SEALING COMPOUND COUNTERTOP (BY OTHERS) 76mm (3) * See faucet section for additional models available 83mm (3-1/4) *165mm (6-1/2) *260mm (8-3/4) SUPPLIES AS REQ'D 1-1/4 O.D. WASTE 1-1/4 O.D. TAILPIECE 203mm (8) 178mm (7) 787mm (31) FINISHED FLOOR NOTES: DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE *SUGGESTED. FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE TEMPLATE SUPPLIED WITH SINK. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2008 AS America Inc. J19 Revised 2/08
