Download American Dryer Corp. AD-24 II User's Manual
Transcript
AD-24 II Parts Manual 24 VAC Phase 5 as of July 17, 2000 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: [email protected] www.amdry.com 082500MFM/calbert ADC Part No. 450341 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ____________________________ MODEL NO. AD-24 II __________________________________________ RESELLER’S NAME _______________________________________________________________________________________ Serial Number(s) ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 3 Phase 5 OPL Microprocessor Control Panel Assembly ........................................................................... 4 Phase 5 Microprocessor Control Box Assembly For Coin and OPL Models ............................................................................................................... 5 Microprocessor Coin Vault Assembly ...................................................................................................... 6 Main Door “Steel” Assembly .................................................................................................................. 7 Slide Meter Case Assembly ................................................................................................................ 8, 9 Cold Rolled Steel (CRS) Front Panel Assembly .................................................................................... 10 Main Door Switch Assembly (Cold Rolled Steel [CRS] Type Door) ...................................................... 11 Basket (Tumbler)/Support Assemblies ................................................................................................... 12 Lint Door Assembly .............................................................................................................................. 13 Sensor Bracket Assemblies ............................................................................................................. 14, 15 Control Door (25¢ Coin Models) For Models Mfd. as of March 17, 2001 ......................................................................................... 16 Control Door (25¢ Coin Models) For Models Mfd. between January 24, 2001 and March 16, 2001 .................................................. 17 Control Door (Slide Meter Models) For Models Mfd. as of March 17, 2001 ......................................................................................... 18 Control Door (Slide Meter Models) For Models Mfd. between January 24, 2001 and March 16, 2001 .................................................. 19 Control Door (OPL and Non 25¢ Coin Models) For Models Mfd. as of March 17, 2001 ......................................................................................... 20 Control Door (OPL and Non 25¢ Coin Models) For Models Mfd. between January 24, 2001 and March 16, 2001 .................................................. 21 Control Door Assembly For Models Mfd. prior to January 24, 2001 .................................................................................... 22 Basket (Tumbler) Bearing Assembly For Models Mfd. as of April 27, 2001 ............................................................................................ 23 Basket (Tumbler) Bearing Assembly For Models Mfd. prior to April 27, 2001 .................................................................................. 24, 25 Lint Trap Assembly ............................................................................................................................... 26 Idler Bearing Assembly ......................................................................................................................... 27 Electric Oven Assembly .................................................................................................................. 28, 29 Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ......................................................... 30 Gas Burner Assembly ........................................................................................................................... 31 Sail Switch/Hi-Limit Assemblies ............................................................................................................ 32 Single-Phase (1Ø) Motor, Electric Relay Panel Assembly ...................................................................... 33 Slide Meter Control Box Assembly ....................................................................................................... 34 Outer Top/Back Guard Assemblies ....................................................................................................... 35 Electric Oven Component Application Chart ......................................................................................... 36 Additional Parts Available ..................................................................................................................... 37 3 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 ------11 Part No. Qty. 112526 880959 1 1 880958 150309 137213 824998 153010 150005 881163 881143 137023 137021 880772 824080 122800 136048 1 1 1 1 2 2 1 1 1 3 1 1 1 1 Description Coin Keyboard Label Assembly Phase 5 Coin Microprocessor Control Panel Assembly (includes illus. nos. 1, 2, 4, 5, 6, and 11) Coin Control Panel ONLY #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Coin Acceptor with Optical Switch Optical Switch Optical Switch Connector Microprocessor Socket Single Coin Optic Switch Harness Dual Coin Optic Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo-Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer). Telephone: (508) 678-9000 Fax: (508) 678-9447 4 Phase 5 OPL Microprocessor Control Panel Assembly Illus. No. 1 Part No. Qty. 112535 112276 112275 112277 1 1 1 1 112278 1 2 801225 824443 1 1 3 137222 824998 153010 150005 150309 882541 136048 1 1 2 2 1 1 1 4 5 6 7 Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English Only) ... Not Illustrated OPL Stick-On Labels (Spanish, Italian, and Hebrew) ... Not Illustrated 3-Language OPL Stick-On Labels (English, Spanish, and Hebrew) ... Not Illustrated 5-Language OPL Stick-On Labels (Italian, Dutch, French, German, and Chinese) ... Not Illustrated Phase 5 Microprocessor Control Panel ONLY Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 7) Phase 5 OPL Non-Reversing Controller Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Spring Turn Latch Assembly 1/8-Amp (Slo-Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for microprocessor controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Phase 5 Microprocessor Control Box Assembly 5 For Coin and OPL Models Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 * Part No. 141403 150301 120715 150002 151000 136057 150301 136008 122641 122706 305542 150301 Qty. 1 2 1 2 2 * * * 1 * 1 2 Description 24 VAC Transformer #8-18 x 7/16” Phillips Pan Head TEK Screw 30-Position Terminal Block #6-32 x 1” Round Head Machine Screw #6-32 Pal Nut 1/2-Amp (Slo-Blo) Fuse ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip 15-Pin Microprocessor Connector Socket Terminal Battery Bracket #8-18 x 7/16” Phillips Pan Head TEK Screw As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 6 Microprocessor Coin Vault Assembly Illus. No. 1 Qty. 802146 1 3 802139 160027 160127* 160022 160113* 802138 1 1 1 1 1 1 4 5 6 7 8 802147 153050 152014 102502 102601 102603 1 4 4 1 1 1 2 * Part No. Description Security Coin Vault Assembly Complete (includes illus. nos. 1 through 3) High Security Coin Vault ONLY High Security Lock with Key (each keyed different) Key ONLY For High Security Lock High Security Screw Lock with Key Key ONLY For High Security Screw Lock High Security Coin Box Assembly with Lock (includes illus. nos. 2 and 3) High Security Coin Box ONLY 1/2” S.A.E. Flat Washer 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Support Rod Catch Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Main Door “Steel” Assembly Illus. No. Part No. Qty. 1 881150 1 2 3 102354 170730 170731 881152 1 1 1 1 4 5 6 150445 153031 881151 2 1 1 7 150445 150443 150683 152014 151010 150120 150683 152014 881210 170333 102211 102360 2 2 3 3 1 1 3 3 1 1 1 1 170731 1 8 9 10 11 12 13 14 15 Telephone: (508) 678-9000 7 Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4-20 x 3/4” Stainless Steel Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut Black Main Door Handle ONLY Stainless Steel Main Door Handle ONLY 20-7/16” Door Glass Glass/Door Gasket Tape (for models mfd. as of February 9, 2001) Black Glass Adhesive (10.3 oz. cartridge) (for models mfd. prior to February 9, 2001) Fax: (508) 678-9447 8 American Dryer Corporation Slide Meter Case Assembly 88 Currant Road / Fall River, MA 02720-4781 9 Slide Meter Case Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 9 10 11 12 13 160099 160199* 125908 122643 122642 152014 122603 122631 881100 122701 125900 154001 150300 881015 1 1 1 9 1 4 1 2 1 21 1 2 4 1 14 15 16 17 18 19 20 21 22 23 24 880937 122400 131917 123005 125903 --------------801701 102502 102601 102603 150207 1 1 1 1 1 1 1 1 1 1 1 2 * Description Lock/Key/Cam and Hardware Key ONLY for Slide Meter Lock Slide Meter Accumulator - 24 VAC - 60 RPM (60 Hz Only) Mate-N-Lock Pin ONLY 9-Position Mini-Universal Socket 1/4-20 Free Spin Wash Nut 9-Position Connector (Mate-N-Lock) 6-Position Connector (Mate-N-Lock) Slide Meter Modular J-Box Assembly Socket Terminal ONLY Slide Meter Case with Door Less Lock #10-24 Speed Nut #10-16 x 1/2” Hex Washer TEK Screw Slide Meter Control Panel (faceplate) Complete (includes illus. nos. 11 and 13 through 16) Slide Meter Control Panel (faceplate) ONLY Rocker Heat Selector Switch Push-to-Start Relay - 24 VAC Red Light Indicator - 24 VAC Slide Meter Extension Typical Slide Meter Coin Chute (not available from ADC) Typical Slide Meter Coin Box (not available from ADC) Slide Meter Case Mounting Plate Control Door Support Rod Control Door Rod Retainer Clip Control Door Support Rod Catch #10-24 x 1/2” Round Head Machine Screw Specify key number when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 10 Cold Rolled Steel (CRS) Front Panel Assembly Illus. No. Part No. Qty. 1 2 3 4 802511* 154215 170330 150309 150313 1 2 1 9 9 150318 - * Description Front Panel Assembly (cold rolled steel [CRS] door) 1/8” Pop Rivets Friction Door Latch #10-16 x 1/2” Hex Head TEK Crimptite Screw TORX Head Screw (for models mfd. as of October 2, 2000) Torx Plus Bit (for removal of Torx Screw) Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Main Door Switch Assembly (Cold Rolled Steel [CRS] Type Door) Illus. No. 1 2 3 4 5 6 7 Part No. Qty. 150006 152013 153010 137005 122636 881211 881212 881213 881214 881153 2 2 2 1 2 1 1 1 1 1 881215 1 881216 1 881217 1 150301 2 Telephone: (508) 678-9000 11 Description #6-32 x 7/8” Phillips Pan Head Machine Screw #6-32 Hex Nut #6 Star Washer Door Switch ONLY Flag Terminal Black Main Door Switch Housing ONLY Beige Main Door Switch Housing ONLY White Main Door Switch Housing ONLY Blue Main Door Switch Housing ONLY Black Main Door Switch Housing Complete (includes illus. nos. 1 through 4 and 6) Beige Main Door Switch Housing Complete (includes illus. nos. 1 through 4 and 6) White Main Door Switch Housing Complete (includes illus. nos. 1 through 4 and 6) Blue Main Door Switch Housing Complete (includes illus. nos. 1 through 4 and 6) #8-18 x 7/16” Phillips Pan Head TEK Screw Fax: (508) 678-9447 12 Illus. No. Basket (Tumbler)/Support Assemblies Part No. Qty. 1 800843 1 2 800717 154210 1 30 150309 30 301318 301317 150518 100916 153003 800612 153001 153002 152004 115986 2 1 1 3 3 1 3 3 3 1 3 4 5 6 7 8 9 10 11 American Dryer Corporation Description Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Basket (tumbler) ONLY 5/32” x 3/16” Pop Rivet (for models mfd. as of December 12, 2000) #10-16 x 1/2” Hex Head TEK Crimptite Screw (for models mfd. prior to December 12, 2000) Tapered Rib ONLY (low rib) Tapered Rib ONLY (high rib) 5/16-18 x 3/8” Socket Screw 3/8-16 x 25” Hex Head Tie Rod 3/8” x 1-1/2” Fender Washer Basket (tumbler) Support ONLY 5/16” Flat Washer 5/16” Lock Washer 5/16-18 Hex Nut Basket (tumbler) Felt Pad 88 Currant Road / Fall River, MA 02720-4781 13 Lint Door Assembly Illus. No. Part No. Qty. 1 2 3 882981* 170226 117604 1 1 2 * Description Right Hand Hinge Lint Door Assembly with Slide Latch Slide Latch Flush Style (black) 1/8” x 3/8” Neoprene Sponge Tape Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 14 Sensor Bracket Assemblies Microprocessor Sensor Bracket Assembly Noncomputer Sensor Bracket Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 15 Sensor Bracket Assemblies Illus. No. Part No. Qty. 1 880251 1 2 3 4 5 6 7 8 9 10 130103 153010 152000 121028 122701 122605 154007 150005 801425 1 2 2 2 4 1 2 2 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 122604 122700 150301 150005 130103 130111 130100 130101 153010 152000 121028 840065 122701 122605 840062 1 4 2 * 1 1 1 1 * * ** 1 *** 1 1 25 801418 1 26 27 122604 122700 122801 150301 1 *** 1 2 28 Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225º Large Automatic Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal Socket Terminal 4-Pin Socket Connector 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 225º Large Automatic Reset Thermostat 150º Large Thermostat 130º Large Thermostat 180º Large Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal Sensor Jumper (4) Socket Terminal 4-Pin Socket Connector ONLY Sensor (4) Bracket Harness Assembly (includes illus. nos. 21, 23, and 24) Noncomputer Sensor (4) Bracket Harness Assembly Complete (includes thermostats) (includes illus. nos. 14 through 27) 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw * Qty. = 4 or 5. ** Qty. = 6 or 8. *** Qty. = 3 or 4. Telephone: (508) 678-9000 Fax: (508) 678-9447 16 Control Door (25¢ Coin Models) For Models Mfd. as of March 17, 2001 Illus. No. Part No. Qty. 1 883001** 1 2 3 4 5 6 7 8 802514 117604 117605 152014 160040 160140 881053 1 3 2 5 2 * 1 Description Coin Control Door without Locks (includes illus. nos. 1 through 4) Control Door Trim (cold rolled steel [CRS]) 1/8” x 3/8” Neoprene Sponge Tape 1/4” x 3/8” Neoprene Sponge Tape 1/4-20 Free Spin Wash Nut XX4451 Lock XX4451 Key ADC Logo with Adhesive Tape * As required. ** Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Control Door (25¢ Coin Models) 17 For Models Mfd. between January 24, 2001 and March 16, 2001 Illus. No. Part No. Qty. 1 883001** 1 2 3 4 5 6 7 8 9 802514 117604 117605 152014 150420 160040 160140 881053 1 3 2 5 2 2 * 1 Description Coin Control Door without Locks (includes illus. nos. 1 through 4) Control Door Trim (cold rolled steel [CRS]) 1/8” x 3/8” Neoprene Sponge Tape 1/4” x 3/8” Neoprene Sponge Tape 1/4-20 Free Spin Wash Nut #10-16 x 5/8” TEK Tamperproof Screw XX4451 Lock XX4451 Key ADC Logo with Adhesive Tape * As required. ** Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 18 Control Door (Slide Meter Models) For Models Mfd. as of March 17, 2001 Illus. No. Part No. Qty. 1 883000** 1 2 3 4 5 6 7 8 802514 117604 117605 152014 160040 160140 881053 1 3 2 5 2 * 1 Description Slide Meter Control Door without Locks (includes illus. nos. 1 through 4) Control Door Trim (cold rolled steel [CRS]) 1/8” x 3/8” Neoprene Sponge Tape 1/4” x 3/8” Neoprene Sponge Tape 1/4-20 Free Spin Wash Nut XX4451 Lock XX4451 Key ADC Logo with Adhesive Tape * As required. ** Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Control Door (Slide Meter Models) 19 For Models Mfd. between January 24, 2001 and March 16, 2001 Illus. No. Part No. Qty. 1 883000** 1 2 3 4 5 6 7 8 9 802514 117604 117605 152014 150420 160040 160140 881053 1 3 2 5 2 2 * 1 Description Slide Meter Control Door without Locks (includes illus. nos. 1 through 4) Control Door Trim (cold rolled steel [CRS]) 1/8” x 3/8” Neoprene Sponge Tape 1/4” x 3/8” Neoprene Sponge Tape 1/4-20 Free Spin Wash Nut #10-16 x 5/8” TEK - 3 Tamperproof Screw XX4451 Lock XX4451 Key ADC Logo with Adhesive Tape * As required. ** Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 20 Control Door (OPL and Non 25¢ Coin Models) For Models Mfd. as of March 17, 2001 Illus. No. Part No. Qty. 1 882999** 1 2 3 4 5 6 7 8 802514 117604 117605 152014 160040 160140 881053 1 3 2 5 2 * 1 Description OPL and Non 25¢ Coin Control Door without Locks (includes illus. nos. 1 through 4) Control Door Trim (cold rolled steel [CRS]) 1/8” x 3/8” Neoprene Sponge Tape 1/4” x 3/8” Neoprene Sponge Tape 1/4-20 Free Spin Wash Nut XX4451 Lock XX4451 Key ADC Logo with Adhesive Tape * As required. ** Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 21 Control Door (OPL and Non 25¢ Coin Models) For Models Mfd. between January 24, 2001 and March 16, 2001 Illus. No. Part No. Qty. 1 882999** 1 2 3 4 5 6 7 8 9 802514 117604 117605 152014 150420 160040 160140 881053 1 3 2 5 2 2 * 1 Description OPL and Non 25¢ Coin Control Door without Locks (includes illus. nos. 1 through 4) Control Door Trim (cold rolled steel [CRS]) 1/8” x 3/8” Neoprene Sponge Tape 1/4” x 3/8” Neoprene Sponge Tape 1/4-20 Free Spin Wash Nut #10-16 x 5/8” TEK Tamperproof Screw XX4451 Lock XX4451 Key ADC Logo with Adhesive Tape * As required. ** Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 22 Control Door Assembly For Models Mfd. prior to January 24, 2001 Illus. No. Part No. Qty. 1 882984* 1 2 3 4 5 6 7 8 802514 117604 117605 152014 160040 160140 881053 3 2 5 2 2 1 * Description Control Door with Cold Rolled Steel (CRS) Trim with Hinge (includes illus. nos. 1 through 4) Cold Rolled Steel (CRS) Control Door Trim 1/8” x 3/8” Neoprene Sponge Tape 1/4” x 3/8” Neoprene Sponge Tape 1/4-20 Free Spin Wash Nut XX4451 Lock XX4451 Key ADC Logo with Adhesive Tape Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Basket (Tumbler) Bearing Assembly 23 For Models Mfd. as of April 27, 2001 Illus. No. Part No. Qty. 1 2 3 4 880209 153005 152005 882544 1 12 4 1 5 6 7 8 9 10 11 12 13 14 15 16 17 18 882542 880202 150601 153004 153005 152005 154326 152004 150621 153002 150501 100713 101100 100100 150610 1 1 2 8 2 2 2 4 2 4 4 1 1 1 2 Telephone: (508) 678-9000 Description 1-3/8” 4 Bolt Pressed Steel Round Bearing 3/8” Lock Washer 3/8-16 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 14 and 18) Bearing Support ONLY 1-3/8” Pillow Block Bearing 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Lock Washer 3/9-16 Hex Nut 5/16-24 x 3/8” Setscrew Black 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt 5/16” Lock Washer 5/16-18 x 3/4” Tap Bolt 1/4” x 1/4” x 7/8” Key 18” Pulley 5L-660 V-Belt (to idler assembly) 5/16-18 x 1-1/2” Allen Setscrew Fax: (508) 678-9447 24 Basket (Tumbler) Bearing Assembly For Models Mfd. prior to April 27, 2001 American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 25 Basket (Tumbler) Bearing Assembly For Models Mfd. prior to April 27, 2001 Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Part No. Qty. 880203 153005 152005 882544 1 4 4 1 882545 1 882542 882543 880202 880779 150601 153004 153005 152005 154326 152004 150621 153002 150501 102120 824807 100713 101100 100111 150610 1 1 1 1 2 8 2 2 2 4 2 4 4 1 1 1 1 1 2 Telephone: (508) 678-9000 Description 1-3/8” Flange Bearing 3/8” Lock Washer 3/8-16 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 19) Pillow Block Bearing Assembly Complete (with rotational sensor) (includes illus. nos. 4 through 16) Bearing Support ONLY Bearing Support ONLY (with rotational sensor) 1-3/8” Pillow Block Bearing ONLY 1-3/8” Pillow Block Bearing Assembly (with rotational sensor) 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-24 x 3/8” Black Setscrew 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt 5/16” Lock Washer 5/16-18 x 3/4” Tap Bolt Sintered 8 Magnet Rotational Sensor Assembly (with rotational sensor) 1/4” x 1/4” x 7/8” Key 18” Pulley 5L-650 V-Belt (to idler assembly) 5/16-18 x 1-1/2” Allen Setscrew Fax: (508) 678-9447 26 Illus. No. Lint Trap Assembly Part No. Qty. 1 800429 1 2 3 4 5 6 7 8 800419 154200 304102 150300 800503 323724 122116 150425 1 7 1 3 1 1 1 2 American Dryer Corporation Description Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) Lint Trap ONLY 5/32” Pop Rivet Lint Screen Holder #10-16 x 1/2” Hex Washer TEK Screw Lint Screen ONLY Lint Drawer Switch Bracket Lint Drawer Switch #12-24 x 3/8” Slotted Pan Head Screw 88 Currant Road / Fall River, MA 02720-4781 27 Idler Bearing Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 100111 101129 100105 154301 100705 882576 1 1 1 2 1 1 7 8 9 10 11 12 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 Telephone: (508) 678-9000 Description 5L-650 V-Belt 9” x 2-1/2” Compound Pulley 4L-520 V-Belt (idler to motor) 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt Fax: (508) 678-9447 28 Electric Oven Assembly ELECTRIC OVEN (FRONT VIEW) ELECTRIC OVEN (REAR VIEW) American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 29 Electric Oven Assembly Illus. No. Part No. Qty. 1 803003* --------* --------* 150300 802800 802801 1 1 1 2 1 1 154004 150309 802799 122200 150303 105500 319202 154002 150300 803100 320611 150402 130400 150300 154001 121010 152014 --------* --------* 120081 120080 152008 121011 --------* 153009 321300 150402 1 2 1 1 2 1 1 1 2 1 1 2 1 2 1 1 3 1 1 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 * Description Electric Oven Box ONLY Electric Oven Assembly Complete Electric Element #10-16 x 1/2” Hex Washer TEK Screw Sail Switch Box with Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover Sail Switch #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10-16 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover Large Relay Box Cover #10-24 x 5/8” Slotted Truss Head Machine Screw 290º Hi-Limit #10-16 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 5/8” Slotted Truss Head Machine Screw Refer to Electric Oven Component Application Chart on page 36. Telephone: (508) 678-9000 Fax: (508) 678-9447 30 Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Illus. No. Part No. Qty. 1 2 3 4 5 6 100105 101131 150501 153002 153001 100065* 1 1 4 4 4 1 7 8 122701 137030 122801 152004 153002 153001 117600 154000 800909 803871* 8 1 1 4 4 4 4 4 1 1 153050 100604 100702 153050 152006 2 1 1 2 2 9 10 11 12 13 14 15 16 17 18 19 * Description 4L-520 V-Belt (to idler bearing assembly) 1/2” x 2-1/4” Motor Pulley (for use on 1Ø 60 Hz models Only) 5/16-18 x 3/4” Tap Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 115-230v 1Ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug Socket Terminal 8-Pin Housing Connector ONLY Pin/Socket Extraction Tool 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut 1/2 HP Motor Mount ONLY (56Z frame) 1/2 HP 115-230v 1Ø 60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly with Plug Motor (includes illus. nos. 3 through 8 and 13 through 19) 1/2” S.A.E. Flat Washer 12-1/2” Impellor (fan) with 1/2” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut Specify voltage when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 31 Gas Burner Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Part No. Qty. 141104 151001 150108 140815 140800 141230 318714 150309 128927 140411 809307 801048 810030 150300 152013 142707 142506 142600 142809 882982 2 2 2 2 2 1 1 5 1 1 1 1 1 9 2 1 1 1 1 1 882983 1 Telephone: (508) 678-9000 Description Small Tube Burner #8-32 Pal Nut #8-32 x 1/2” Phillips Pan Head Machine Screw #37 Orifice (natural gas) #52 Orifice (liquid propane [L.P.] gas) 1/2” Direct Spark Ignition (DSI) Manifold (2-port) 1-Piece Gas Valve Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Gas Valve Liquid Propane (L.P.) Conversion Kit For Gas Valve Ignitor-Probe Assembly ADC Direct Spark Ignition (DSI) Johnson Module (three [3] tries) Johnson Direct Spark Ignition (DSI) Module Mounting Bracket #10-16 x 1/2” Hex Washer TEK Screw #6-32 Hex Nut 1/2” x 1-1/2” Long Black Nipple 1/2” Street Elbow 1/2” Black Union 1/2” x 29-1/8” Pipe Direct Spark Ignition (DSI) Burner Box - Natural Gas (includes illus. nos. 1 through 3 and 5 through 17) Direct Spark Ignition (DSI) Burner Box - Liquid Propane (L.P.) Gas (includes illus. nos. 1 through 3 and 5 through 17) Fax: (508) 678-9447 32 Illus. No. Sail Switch/Hi-Limit Assemblies Part No. Qty. 1 2 3 4 5 6 7 8 9 154004 150309 802799 150303 122200 105500 319202 154002 802801 1 2 1 2 1 1 1 1 1 10 11 12 13 14 15 802800 142809 150309 319704 151000 150001 130403 1 1 2 1 2 2 1 American Dryer Corporation Description Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Sail Switch Box Assembly Complete (includes illus. nos. 1 through 9) Sail Switch Box with Cover and Bracket ONLY 1/2” x 29-1/8” Pipe #10-16 x 1/2” Hex Head TEK Crimptite Screw Hi-Limit Mounting Bracket #6-32 Pal Nut #6-32 x 1/2” Round Head Machine Screw 330º Hi-Limit 88 Currant Road / Fall River, MA 02720-4781 33 Single-Phase (1Ø) Motor, Electric Relay Panel Assembly Illus. No. 1 2 3 - Part No. 132475 150299 824828 322809 150301 Qty. 1 2 1 1 4 Telephone: (508) 678-9000 Description 2-Pole Contactor - 24 VAC #10 x 1” Hex Washer TEK Screw RC Network with Connector Back Electrical Box Cover ... Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated Fax: (508) 678-9447 34 Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 ----* Slide Meter Control Box Assembly Part No. 132475 150299 150300 141403 136057 150301 136008 150002 120715 151000 152004 153002 305520 322809 150301 Qty. 1 2 2 1 * * * 2 1 2 1 1 1 1 4 Description 2-Pole Contactor - 24 VAC #10 x 1” Hex Washer TEK Screw #10-16 x 1/2” Hex Washer TEK Screw 24 VAC Transformer 1/2-Amp (Slo-Blo) Fuse #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip #6-32 x 1” Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut 5/16-18 Hex Nut 5/16” Lock Washer Rear Contact Plate Back Electrical Box Cover ... Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw ... Not Illustrated As required. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Outer Top/Back Guard Assemblies Illus. No. 1 2 3 4 5 6 7 8 9 Part No. 322809 150301 330660 150301 150301 330767 330609 150301 103500 Qty. 1 4 1 7 10 1 1 13 4 Telephone: (508) 678-9000 35 Description Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Outer Top Bottom Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg Fax: (508) 678-9447 36 American Dryer Corporation ADE-24 II OVEN WIRE ELEMENT TERMINAL LUG BUS BAR OVEN RELAY Volt Phase Wire Oven Assy.* 24 460/480 3ø 3 or 4 824951 6 4 120009 4 #10 133300 6 121010 2 BEAJ 131352 24 4 16 3ø 3 or 4 824945 6 4 120008 4 #8 133100 6 121010 2 BEAJ 131352 24 240 3ø 3 824932 6 4 12 0 0 0 9 3 #6 133200 3 121012 1 DEAJ 131361 24 208 3ø 3 or 4 824915 6 4 120008 3 #4 133300 4 121012 1 DPA63 131369 20 380 3ø 3 or 4 824938 6 4 120008 4 #10 133000 6 121010 2 BEAJ 131352 20 240 1ø 2 824927 5 4 12 0 0 0 9 2 #4 133300 2 121012 2 FEAJ 131375 20 208 1ø 2 824905 5 4 12 0 0 0 8 2 #4 133300 2 121012 2 GEAJ 131385 18 460/480 3ø 3 or 4 824950 6 3 120007 4 #10 133000 6 121010 2 BEAJ 131352 18 4 16 3ø 3 or 4 824944 6 3 12 0 0 0 6 4 #10 13 3 0 0 0 6 121010 2 BEAJ 131352 18 240 3ø 3 824931 6 3 120007 3 #8 133100 4 121010 2 DPA43 131357 18 240 1ø 2 824925 6 3 12 0 0 0 7 2 #4 133300 2 121012 2 DPA63 131369 18 208 3ø 3 or 4 824914 6 3 12 0 0 0 6 3 #6 133200 4 121010 2 DEAJ 131361 18 208 1ø 2 824903 6 3 120006 2 #4 133300 2 121012 2 FEAJ 131375 15 380 3ø 3 or 4 824937 6 3 12 0 0 0 6 4 #10 13 3 0 0 0 6 121010 2 BEAJ 131352 15 240 1ø 2 824924 5 3 12 0 0 0 7 2 #6 133200 3 121010 1 DPA63 131369 15 208 1ø 2 824902 5 3 12 0 0 0 6 2 #4 133300 2 121012 1 DPA63 131369 Qty. Kw Part No. Qty Size Part No. Qty. Part No. P/N: 121011 Cat. No. Part No. * Oven assemblies DO NOT include oven relay (contactor). This item must be ordered separately. When ordering Oven Assembly Complete, specify 3 or 4 wire when applicable, as well as if dryer has Microprocessor or Non-Microprocessor controls. N/A = Not available. Electric Oven Component Application Chart 88 Currant Road / Fall River, MA 02720-4781 Kw Additional Parts Available Part No. Description 112027 112040 112041 112533 112534 120100 120300 120400 120600 120802 120902 121014 121026 121499 121500 122804 121497 121507 182457 404500 404502 404506 404507 880200 “Water Washed Fabrics” Label “Lint Compartment” Label “Caution - Exhausted” Label “Phase 5 Coin Program Location Summary” Label “Phase 5 OPL Program Location Summary” Label 3/8” Straight (BX) Connector 3/8” x 45° (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Greenfield (BX) Red Butt Connector #74B Wire Nut 1/4” Insulated (female) Terminal Tab Receptacle Combination 5-1/2” Harness Tie 8” Harness Tie Manometer (water column test gauge) 33” Heavy Duty Cable Tie Snap Wire Tie Screw Mount 3/4” Jiffy Clip (BX) Retainer Clip Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Almond “B” Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint Electrical Terminal (assortment) Kit Telephone: (508) 678-9000 37 Fax: (508) 678-9447 ADC 450341 1 - 06/14/01-25 2 * 01/20/03-20