Download American Dryer Corp. ADE-30S User's Manual

SUPER AD-30 Parts Manual
24 VAC Phase 5
1994 thru 2000
MODELS: ADG-30DS
ADE-30S
ADS-30S
American Dryer Corporation
88 Currant Road
Fall River, MA 02720-4781
Telephone: (508) 678-9000 / Fax: (508) 678-9447
E-mail: [email protected]
www.amdry.com
091701WM/mcronan
ADC Part No. 450144
Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is
properly maintained, it will provide many years of safe, efficient, and trouble-free operation.
ONLY qualified technicians should service this equipment.
OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual
included with the dryer.
The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or
other flammable vapors or liquids
in the vicinity of this or any other
appliance.
Ne pas entreposer ni utiliser d’essence
ni d’autres vapeurs ou liquides
inflammables dans le voisinage de cet
appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make
changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or
discontinue models.
Important
For your convenience, log the following information:
DATE OF PURCHASE
MODEL NO.
SUPER AD-30
DISTRIBUTORS NAME
Serial Number(s)
Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at (508) 678-9447 or telephone your orders directly to the ADC Parts Department at
(508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so
that your order is processed accurately and promptly.
The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the
various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER”
Information must be obtained from your local gas supplier on the instructions
to be followed if the user smells gas. These instructions must be posted in a
prominent location near the dryer.
Table of Contents
Control Door Assembly Without Trim ...................................................................................................... 3
High Security Control Door Assembly ..................................................................................................... 4
Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 5
Phase 5 OPL Microprocessor Control Panel Assembly .......................................................................... 6
Phase 5 OPL and Coin Microprocessor Control Box Assembly .............................................................. 7
Coin Vault Assembly .............................................................................................................................. 8
Dual Timer “Tap Touch” Controls ............................................................................................................ 9
Dual Timer Control Panel Assembly ...................................................................................................... 10
Dual Timer Control Box Assembly ........................................................................................................ 11
Non-Microprocessor Coin Meter Control Panel Assembly .................................................................... 12
Non-Microprocessor Coin Meter Control Box Assembly ...................................................................... 13
Slide Meter Case Assembly .................................................................................................................. 14
Slide Meter Control Box ....................................................................................................................... 15
Coin Meter Replacement Parts ............................................................................................................. 16
Lint Trap Assembly ............................................................................................................................... 17
Drop Lint Door Assembly Without Trim ................................................................................................ 18
Drop Lint Door Assembly ............................................................................................................... 19, 20
Main Door “Steel” Assembly ................................................................................................................ 21
Plastic Main Door Assembly ................................................................................................................. 22
Main Door Switch Assembly Cold Rolled Steel (CRS) Door ................................................................. 23
Plastic Main Door Switch Assembly ...................................................................................................... 24
Cold Rolled Steel (CRS) Door Front Panel ........................................................................................... 25
Plastic Door Front Panel Assembly ....................................................................................................... 26
Basket (Tumbler)/Support Assemblies ................................................................................................... 27
Basket (Tumbler) Bearing Assembly ................................................................................................ 28, 29
Idler Bearing Assembly ................................................................................................................... 30, 31
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ........................... 32, 33
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly ................................... 34, 35
Sensor Bracket Assemblies ............................................................................................................. 36, 37
Direct Spark Ignition (DSI) Burner Assembly .................................................................................. 38, 39
Electric Oven Assembly .................................................................................................................. 40, 41
Single-Phase (3ø) Motor, Electric Relay Panel Assembly ...................................................................... 42
3-Phase (3ø) Motor, Electric Relay Panel Assembly .............................................................................. 43
Microprocessor Reversing Rear Control Box Assembly ......................................................................... 44
Dual Timer Reversing Rear Control Box Assembly ................................................................................ 45
Steam Coil/Air Operated Steam Damper Assembly ......................................................................... 46, 47
Steam Coil/Mechanical Steam Damper Assembly ............................................................................ 48, 49
Sail Switch/Hi-Limit Assembly .............................................................................................................. 50
Outer Top/Back Guard Assembly ......................................................................................................... 51
Coin Acceptor Listing ........................................................................................................................... 52
Step Down Transformer Usage Listing for Gas/Steam Dryers ................................................................ 53
Transformer Usage Listing for Electric Dryers ........................................................................................ 54
Electric Oven Component Application Chart ......................................................................................... 55
Additional Parts Available ..................................................................................................................... 56
Control Door Assembly Without Trim
3
For OPL (Non-Coin) Models Mfd. as of July 19, 1999
Illus. No.
Part No.
Qty.
1
881053
870011
883097*
1
1
1
883120
1
117604
150300
102603
102601
102502
882541
4
4
1
1
1
2
2
3
4
5
6
7
8
*
Description
ADC Logo ONLY (with double adhesive tape)
Logo Double Adhesive Tape Kit ONLY
Control Door
(includes illus. nos. 2 and 3)
Stainless Steel Control Door
(includes illus. nos. 2 and 3)
Neoprene Sponge Tape (sold by the foot)
#10 x 1/2” Hex Washer TEK Screw
Control Door Rod Support Catch
Control Door Rod Retainer Clip
Control Door Support Rod
Spring Turn Latch Assembly
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
4
High Security Control Door Assembly
For ALL Coin Models and ONLY OPL Models Mfd. prior to July 19, 1999
Illus. No.
1
2
3
4*
5
6
7
8
9
10
11
*
Part No.
Qty.
160015
1
160104
160017
1
1
160016
881053
1
1
881052
1
870011
800023
1
1
800140
1
180200
117603
150201
150300
102600
102601
102502
1
3
5
4
1
1
1
Description
High Security MK-100 Lock Assembly with Key
(for Coin Models Only)
MK-100 Key ONLY
Special Dummy Lock ONLY
(for Non-Coin Models Only)
Lock Cam ONLY
ADC Logo with Tape
(for ALL Coin Models Only)
Metal ADC Logo with Tape
(for ALL OPL Models Only)
Logo Double Tape Kit ONLY
High Security Control Door Assembly less Lock
(includes illus. nos. 4 through 7)
High Security Stainless Steel Control Door Assembly Less Lock
(includes illus. nos. 4 through 7)
Top Trim with Lock Hole
Trim Bumper Gasket (sold by the foot)
#10-32 x 1/4" Phillips Round Head Machine Screw
#10 x 1/2" Hex Washer TEK Screw
Control Door Support Rod Catch
Control Door Rod Retainer Clip
Control Door Support Rod
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
5
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
*
Part No.
Qty.
112526
801213
1
1
801229
1
801259
801258
150309
137213
824998
153010
150005
---------
1
1
1
1
1
2
2
1
137056
137023
137021
880772
824080
122800
136048
1*
1*
3*
1
1
1
1
Description
Coin Keyboard Label Assembly
Phase 5 Coin Control Panel Assembly
(includes illus. nos. 1, 2, 4 through 6, and 11)
Phase 5 Coin Control Panel Assembly with Battery Option
(includes illus. nos. 1, 2, 4 through 6, and 11)
Coin Control Panel ONLY
Coin Control Panel with Battery Bracket
#10-16 x 1/2" Hex Head TEK Crimptite Screw
Phase 5 Coin Microprocessor Controller (computer) ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 1/4" Phillips Round Head Machine Screw
Microprocessor Coin Acceptor with Optical Switch
(refer to Microprocessor Coin Acceptor Listing on page 52)
Optic Switch ONLY
Optic Switch Connector ONLY
Microprocessor Socket ONLY
Single Coin Optical Switch Harness
Dual Coin Optical Switch Harness
Microprocessor (female) Pin Extraction Tool
1/8-Amp (Slo Blo) Fuse
For Dual Coin Models double the quantity.
IMPORTANT: Check label on computer chip to verify correct part number for controller.
Telephone: (508) 678-9000
Fax: (508) 678-9447
6
Phase 5 OPL Microprocessor Control Panel Assembly
Illus. No.
1
2
3
4
5
6
7
Part No.
Qty.
112535
112276
112275
1
1
1
112277
1
112278
1
801255
801256
801206
1
1
1
801207
1
137222
137231
824998
153010
150005
150309
136048
1
1
1
2
2
1
1
Description
OPL English Keyboard Label Assembly
OPL Stick-on Labels (English Only)...Not Illustrated
OPL Stick-on Labels
(Spanish, Italian, and Hebrew)...Not Illustrated
3-Language OPL Stick-on Labels
(English, Spanish, and Hebrew)...Not Illustrated
5-Language OPL Stick-on Labels
(Italian, Dutch, French, German, and Chinese)...Not Illustrated
Phase 5 Microprocessor Control Panel ONLY
Phase 5 Microprocessor Control Panel ONLY with Battery Bracket
Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly
Complete
(includes illus. nos. 1 through 6 and 7)
Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete
(includes illus. nos. 1 through 6 and 7)
Phase 5 OPL Non-Reversing Microprocessor Controller (computer) ONLY
Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY
Phase 5 Battery Clip
#6 Star Washer
#6-32 x 3/4" Phillips Round Head Machine Screw
#10-16 x 1/2" Hex Head TEK Crimptite Screw
1/8-Amp (Slo Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller (computer).
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Phase 5 OPL and Coin Microprocessor Control Box Assembly
Illus. No.
Part No.
Qty.
1
---------
1
2
3
4
5
6
7
8
9
10
11
150300
120715
150002
151000
136057
150301
136008
122641
122706
131931
2
1
2
2
*
*
*
1
*
1
12
13
150309
137035
2
1
14
323583
1
15
16
150300
132002
2
1
17
150300
2
*
7
Description
Transformer - 24 VAC
(refer to Transformer Usage Listings on page 53 and page 54)
#10 x 1/2" Hex Washer TEK Screw
30-Position Terminal Block
#6-32 x 1" Slotted Round Head Machine Screw
#6-32 Pal Nut
1/2-Amp (Slo Blo) Fuse
#8 x 7/16" Phillips Pan Head TEK Screw
Fuse Block/Strip ONLY
15-Pin Microprocessor Connector
Socket
Steam Valve Relay - 24 VAC
(for Mechanical Steam Damper Models Only)
#10-16 x 1/2" Hex Head TEK Crimptite Screw
Motor Capacitor
(for Mechanical Steam Damper Models Only)
Capacitor Bracket
(for Mechanical Steam Damper Models Only)
#10 x 1/2" Hex Washer TEK Screw
Transformer
(for Mechanical Steam Damper with 208 volt and higher models)
#10 x 1/2" Hex Washer TEK Screw
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
8
Coin Vault Assembly
Illus. No.
1
Qty.
802112
1
802117
802110
1
1
4
802115
160006
875061
160105*
802020
1
1
1
1
1
5
802019
125915
802018
1
1
1
6
7
8
9
152014
102502
102601
102600
4
1
1
1
2
3
*
Part No.
Description
Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
Microprocessor Coin Vault ONLY
Non-Microprocessor Coin Vault Assembly Complete
(includes illus. nos. 1 through 6)
Non-Microprocessor Coin Vault ONLY
Cam for 1/4 Turn Lock ONLY
1/4 Turn Lock with Key and Cam
1/4 Turn Mer-Pel Key ONLY
1/4 Turn Coin Box Assembly
(includes illus. nos. 2 through 5)
1/4 Turn Coin Box ONLY without Face Plate
High Security (Greenwald) Coin Box ONLY with Key
1/4 Turn Coin Box Face Plate Assembly
(includes illus. nos. 2 through 5)
1/4-20 Free Spin Wash Nut
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Rod Catch
Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Dual Timer “Tap Touch” Controls
9
For Models Mfd. as of November 1, 2000
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
8
824298
824299
824175
122301
131932
120730
151000
882903
1
1
1
1
3
1
6
1
9
10
11
12
13
14
15
850392
153010
152000
150207
150110
112563
124104
124105
2
3
2
4
1
1
1
Telephone: (508) 678-9000
Description
15 Minute Timer - 24 VAC
60 Minute Timer - 24 VAC
Red Pilot Light - 24 VAC
“Tap Touch” Switch
Relay SPST 24v
30-Position Terminal Block
#6-32 Pal Nut
Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
Dual Timer Panel ONLY
#6 Star Washer
#6-32 Hex Nut
#10-24 x 1/2” Phillips Pan Head Machine Screw
#8-32 x 1/4” Phillips Round Head Machine Screw
Dual Timer Panel Overlay
Pure Touch Knob with Red Pointer
Pure Touch Knob with Blue Pointer
Fax: (508) 678-9447
10
Dual Timer Control Panel Assembly
For Models Mfd. prior to November 1, 2000
Illus. No.
Part No.
Qty.
1
2
3
123005
122400
824015
1
1
1
4
5
6
7
8
9
10
11
12
13
14
15
16
800051
131917
150207
154001
152000
153010
120713
150002
150110
150001
131931
151000
112050
150309
1
1
2
2
2
2
1
2
4
2
1
2
1
1
160005
1
124103
124025
124030
122602
122700
122801
2
1
1
1
8
1
17
18
19
20
21
---
American Dryer Corporation
Description
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch
Dual Timer Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 21)
Dual Timer Control Panel ONLY
Push-to-Start Relay - 24 VAC
#10-24 x 1/2" Round Head Machine Screw
#10-24 Speed Nut
#6-32 Hex Nut
#6 Star Washer
18-Position Terminal Block
#6-32 x 1" Round Head Machine Screw
#8-32 x 1/4" Phillips Machine Screw
#6-32 x 1/2" Round Head Machine Screw
Dual Timer Relay - 24 VAC
#6-32 Pal Nut
Dual Timer Label ONLY
#10-16 x 1/2" Hex Head TEK Crimptite Screw
(for models mfd. as of March 1, 1994)
2-Piece Spring Turn Latch
(for models mfd. as of March 1, 1994)
Arrow Timer - 24 VAC
60-Minute Timer - 24 VAC
15-Minute Timer - 24 VAC
9-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
88 Currant Road / Fall River, MA 02720-4781
11
Dual Timer Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
122603
122701
122801
315010
150300
150300
---------
1
9
1
1
2
2
1
7
8
150309
131931
2
1
9
10**
11
12
13
14
15
136008
136057
150301
150002
120715
151000
132002
*
*
*
2
1
2
1
16
150300
2
Description
9-Pin Socket Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool
9-Pin Connector Bracket
#10 x 1/2" Hex Washer TEK Screw
#10 x 1/2" Hex Washer TEK Screw
Transformer - 24 VAC
(refer to Transformer Usage Listings on page 53 and page 54)
#10-16 x 1/2" Hex Head TEK Crimptite Screw
Steam Valve Relay - 24 VAC
(for Mechanical Steam Damper Models Only)
Fuse Block/Strip ONLY
1/2-Amp (Slo Blo) Fuse
#8 x 7/16" Phillips Pan Head TEK Screw
#6-32 x 1" Slotted Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
Transformer
(for Mechanical Steam Damper with 208 volt and higher models)
#10 x 1/2" Hex Washer TEK Screw
* As required.
** Check fusing on dryer for verification.
Telephone: (508) 678-9000
Fax: (508) 678-9447
12
Illus. No.
*
Non-Microprocessor Coin Meter Control Panel Assembly
Part No.
Qty.
1
2
3
123005
122400
824020
1
1
1
4
5
6
7*
8
800054
131917
150207
154001
125601
153010
1
1
2
2
1
2
9
152016
2
150303
2
10
11
120712
150309
160005
1
1
1
12
13
--
122602
122700
122801
1
9
1
Description
Red Indicator Light - 24 VAC
Rocker Heat Selector Switch
Coin Meter Control Panel Assembly Complete - 24 VAC
(includes illus. nos. 1 through 6 and 8 through 12)
Coin Meter Control Panel ONLY
Push-to-Start Relay - 24 VAC
#10-24 x 1/2" Round Head Machine Screw
#10-24 Speed Nut
25¢ Coin Meter - 24 VAC (specify timing)
#6 Star Washer
(for models mfd. as of December 11, 1998)
#4-40 Hex Nut
(for models mfd. as of December 11, 1998)
#4 x 3/4" Pan Head "A" Screw...Not Illustrated
(for models mfd. prior to December 11, 1998)
12-Position Terminal Block
#10-16 x 1/2" Hex Head TEK Crimptite Screw
2-Piece Spring Turn Latch
(used on models mfd. prior to March 1, 1994)
9-Pin Connector ONLY
Pin Terminal ONLY
Pin/Socket Extraction Tool
Consult factory for coin meters not listed.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
13
Non-Microprocessor Coin Meter Control Box Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
122603
122701
122801
315010
150300
150300
---------
1
9
1
1
2
2
1
7
8
150309
131931
2
1
9
10**
11
12
13
14
15
136008
136057
150301
150002
120715
151000
132002
*
*
*
2
1
2
1
16
150300
2
Description
9-Pin Socket Connector
Socket Terminal ONLY
Pin/Socket Extraction Tool
9-Pin Connector Bracket
#10 x 1/2" Hex Washer TEK Screw
#10 x 1/2" Hex Washer TEK Screw
Transformer - 24 VAC
(refer to Transformer Usage Listings on page 53 and page 54)
#10-16 x 1/2" Hex Head TEK Crimptite Screw
Steam Valve Relay - 24 VAC
(for Mechanical Steam Damper Models Only)
Fuse Block/Strip ONLY
1/2 Amp (Slo Blo) Fuse
#8 x 7/16" Phillips Pan Head TEK Screw
#6-32 x 1" Slotted Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
Transformer
(for Mechanical Steam Damper with 208 volt and higher models)
#10 x 1/2" Hex Washer TEK Screw
* As required.
** Check fusing on dryer for verification.
Telephone: (508) 678-9000
Fax: (508) 678-9447
14
Slide Meter Case Assembly
MAN1625
Illus. No.
*
Part No.
Qty.
1*
2
3
4
5
6
7
160199
160099
125908
152014
125900
154203
801700
1
1
1
4
1
6
1
8
9
10
11
12
13
14
15
16
17
315404
----------------801701
102502
102601
102600
122400
123005
131917
1
1
1
1
1
1
1
1
1
1
Description
Key ONLY for Slide Meter Lock
Lock/Key/Cam and Hardware
Slide Meter Accumulator - 24 VAC
1/4-20 Free Spin Wash Nut
Slide Meter Case ONLY with Door Less Locks
1/4" Drive Rivet
Slide Meter Extension ONLY with Mirror
(includes illus. nos. 7 and 8)
Stainless Steel Mirror ONLY
Typical Slide Meter Coin Chute (not available from ADC)
Typical Slide Meter Coin Box (not available from ADC)
Slide Meter Case Mounting Plate
Control Door Support Rod
Control Door Rod Retainer Clip
Control Door Support Rod Catch
Rocker Heat Selector Switch
Red Indicator Light - 24 VAC
Push to-Start Relay - 24 VAC
Specify key number when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
15
Slide Meter Control Box
Illus. No.
Part No.
Qty.
1
2
3
4
5
132451
150299
824828
150300
---------
1
2
1
2
1
6
7
8
9
10
11
---
136057
150301
136008
150002
120715
151000
322809
150301
*
*
*
2
1
2
1
4
*
Description
2-Pole Contactor - 24 VAC
#10 x 1" Hex Head Screw
RC Network with Connectors
#10 x 1/2" Hex Washer TEK Screw
24 VAC Control Voltage Transformer
(refer to Transformer Usage Listings on page 53 and page 54)
1/2 Amp (Slo-Blo) Fuse
#8 x 7/16" Phillips Pan Head TEK Screw
Fuse Block/Strip ONLY
#6-32 x 1" Round Head Machine Screw
30-Position Terminal Block
#6-32 Pal Nut
Back Electrical Box Cover...Not Illustrated
#8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
16
Illus. No.
1
2
3
4
Coin Meter Replacement Parts
Part No.
125541
125540
125500
125501
125502
125503
125504
125506
125507
125508
125510
125515
125516
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
2
American Dryer Corporation
Description
1/60 RPM - 60 Hz Meter Motor - 24 VAC
1/30 RPM - 50 Hz Meter Motor - 24 VAC
2-Point Cam
3-Point Cam
4-Point Cam
5-Point Cam
6-Point Cam
8-Point Cam
9-Point Cam
10-Point Cam
12-Point Cam
Meter Switch "B" with Arm
Meter Switch "A" or "C"
88 Currant Road / Fall River, MA 02720-4781
17
Lint Trap Assembly
Illus. No.
Part No.
Qty.
1
880914
1
2
3
4
5
6
7
-
880913
154200
150300
304100
800500
150419
108120
150418
1
7
3
1
2
2
1
1
Telephone: (508) 678-9000
Description
Lint Trap Assembly Complete
(includes illus. nos. 1 and 3 through 5)
Lint Trap ONLY
5/32" Pop Rivet
#10 x 1/2" Hex Washer TEK Screw
Lint Screen Hold Down
Lint Screen ONLY
#6 x 1/2" Tamperproof TEK Screw
Chain For Drop Lint Door
Tamperproof Screw Hand Driver
Fax: (508) 678-9447
18
Drop Lint Door Assembly Without Trim
For OPL (Non-Coin) Models Mfd. as of July 19, 1999
Illus. No.
Part. No. Qty.
Description
800150
1
160001
1
160103
160003
1
1
160104
1
2
160008
160009
150425
1
1
1
3
4
157000
883098
1
1
5
6
7
-
117604
150419
108120
150418
7
2
1
1
Knob Latch Kit Assembly
(includes illus. nos. 1 and 2)
AD-100 Lock Assembly with Key
(for coin models Only)
AD-100 Key ONLY
Dummy Lock ONLY
(for non-coin models)
MK-100 Key ONLY
(for dummy lock)
Lock Cam For AD-100 and Dummy Lock
Knob Latch Adjustable Cam ONLY
#12-24 x 3/8" Round Head Machine Screw ONLY
(screw for knob latch adjustable cam)
Drop Lint Door Spring
Insulated Drop Lint Door Assembly
(includes illus. nos. 4 and 5)
Neoprene Sponge Tape (sold by the foot)
#6 x 1/2" Tamperproof TEK Screw
Chain For Drop Lint Door (10-1/2" length)
Tamperproof Screw Hand Driver
1
*
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Drop Lint Door Assembly
19
For ALL Coin Models and ONLY OPL Models Mfd. prior to July 19, 1999
Telephone: (508) 678-9000
Fax: (508) 678-9447
20
Illus. No.
1
Part No.
Qty.
160001
160103
800150
1
1
1
160003
1
160104
160008
160009
1
1
1
150425
1
157000
800216*
1
1
800233*
1
800240
150201
117604
1
10
7
117600
7
7
117603
3
8
9
180210
150419
150418
108120
2
2
1
1
2
3
4
5
6
10
*
Drop Lint Door Assembly
Description
AD-100 Lock Assembly with Key
AD-100 Key ONLY
Knob Latch Kit Assembly
(for non-coin models Only)
(includes illus. nos. 1 and 2)
Dummy Lock ONLY
(for non-coin models Only)
MK-100 Key ONLY
Lock Cam for AD-100 Lock
Knob Latch Adjustable Cam
(for non-coin models Only)
#12-24 x 3/8" Round Head Machine Screw
(for knob latch adjustable cam)
Drop Lint Door Spring
Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
Insulated Drop Lint Door Assembly
(includes illus. nos. 4 through 8)
Stainless Steel Drop Lint Door Assembly
#10-32 x 1/4" Phillips Pan Head Machine Screw
Neoprene Sponge Tape (sold by the foot)
(for models mfd. as of August 6, 1998)
Noise Suppressor Tape (sold by the foot)
(for models mfd. prior to August 6, 1998)
Suppressor Tape/Gasket (sold by the foot)
(for models mfd. as of February 8, 1995)
Trim/Kick Plate (31-1/8" length)
#6 x 1/2" Tamperproof Screw
Tamperproof Screw Hand Driver
Chain For Drop Lint Door
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Main Door "Steel" Assembly
21
For OPL Models ONLY Mfd. as of November 3, 2000
Illus. No.
Part No.
Qty.
1
881150
1
2
3
102354
170730
170731
881152
1
1
1
1
4
5
6
150445
153031
881151
2
1
1
7
150445
150443
150683
152014
151010
150120
150683
152014
881210
102218
102360
2
2
3
3
1
1
3
3
1
1
1
170731
1
151013
4
8
9
10
11
12
13
14
15
16
Telephone: (508) 678-9000
Description
Black Main Door Assembly Complete
(includes illus. nos. 1, 2, and 8 through 15)
Door Gasket
Clear Glass Adhesive (10.3 oz. cartridge)
Black Glass Adhesive (10.3 oz. cartridge)
Black Top Hinge Block Assembly
(includes illus. nos. 3 and 4)
1/4-20 x 3/4" Black Cap Head Setscrew
1/4" Nylon Washer
Black Bottom Hinge Block Assembly
(includes illus. nos. 5, 6, and 7)
1/4-20 x 3/4" Black Cap Head Setscrew
1/4-20 x 3/4" Stainless Steel Cap Head Setscrew
1/4-20 x 5/8" Black Carriage Bolt
1/4-20 Free Spin Wash Nut
#10-32 Black Hex Acorn Nut
Door Latch Screw
1/4-20 x 5/8" Black Carriage Bolt
1/4-20 Free Spin Wash Nut
Black Main Door Handle ONLY
20-7/16" Door Glass
Glass/Door Gasket Tape
(for models mfd. as of February 9, 2001)
Black Glass Adhesive (10.3 oz. cartridge)
(for models mfd. prior to February 9, 2001)
#10-32 Black Nylon Acorn Nut
Fax: (508) 678-9447
22
Plastic Main Door Assembly
For OPL and ALL Coin Models Mfd. prior to November 3, 2000
Illus. No.
Part No.
Qty.
1
881421
1
2
3
4
5
6
800448
150410
152014
102349
102212
170730
150448
170319
150431
4
4
1
1
1
1
4
4
1
7
8
9
American Dryer Corporation
Description
Gray Plastic Main Door Assembly Complete with Mechanical Fasteners
(includes illus. nos. 1 and 5 through 9)
12-1/2" Stainless Steel Main Door Hinge Assembly
#10-24 x 3/8" Phillips Pan Head Taptite Screw
1/4-20 Free Spin Wash Nut
Main Door Gasket
20-7/16" Door Glass with (4) Holes
Main Door Glass Adhesive (10.3 oz. cartridge)
1/2" Stainless Steel Flat Head Allen Screw
Door Glass (Nylon) Spacer
Main Door Latch Screw
(#10 x 7/16" Dome Hex Head)
88 Currant Road / Fall River, MA 02720-4781
Main Door Switch Assembly Cold Rolled Steel (CRS) Door
23
For OPL Models ONLY Mfd. as of November 3, 2000
Illus. No.
1
2
3
4
5
6
7
Part No.
153566
152013
153010
137005
122636
881211
150301
Qty.
2
2
2
1
2
1
2
Telephone: (508) 678-9000
Description
#6-32 x 7/8" Clinch Stud
#6-32 Hex Nut 1/4" ATF Zinc Plated
#6 Star Washer
Single-Pole Door Switch (SDS)
Flag Terminal
Main Door Switch Housing
#8-18 x 7/16" Phillips Pan Head TEK Screw
Fax: (508) 678-9447
24
Plastic Main Door Switch Assembly
For OPL and ALL Coin Models Mfd. prior to November 3, 2000
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
152013
153008
137005
121028
154281
800448
2
2
1
2
2
1
7
8
9
10
153565
881246
150201
121405
2
1
2
1
American Dryer Corporation
Description
#6-32 Hex Nut
#6 Lock Washer
Single Pole Door Switch
Insulated Female Terminal
3/8" Standard Nylon Spacers
12-1/2" Stainless Steel Main Door Hinge Assembly
(includes illus. nos. 6 and 7)
#6 Stud
Main Door Switch Housing ONLY
#10-32 x 1 / 4" Phillips Pan Head Screw
Rubber Grommet
88 Currant Road / Fall River, MA 02720-4781
25
Cold Rolled Steel (CRS) Door Front Panel
For OPL Models ONLY Mfd. as of November 3, 2000
Illus. No.
Part No.
Qty.
1
881268*
1
881287
1
881793*
1
154215
170330
150300
150309
881152
881208
150445
150443
881151
881209
2
1
1
8
1
1
4
4
1
1
2
3
4
5
6
7
8
*
Description
Right Hand Front Panel Assembly (CRS door)
(includes illus. nos. 1 through 3)
Stainless Steel Front Panel Assembly (CRS door)
(includes illus. nos. 1 through 3)
Left Hand Front Panel Assembly (CRS door)
(includes illus. nos. 1 through 3)
1/8 Pop Rivet
Friction Door Latch
#10-16 x 1/2" Hex Washer TEK Screw
#10-16 x 1/2" Phillips Hex Head TEK Crimptite Screw
Black Top Hinge Block Assembly
Stainless Steel Top Hinge Block Assembly
1/4-20 x 7/8" Black Cap Head Setscrew
1/4-20 x 7/8" Stainless Steel Cap Head Setscrew
Black Bottom Hinge Block Assembly
Stainless Steel Bottom Hinge Assembly
Specify color when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
26
Plastic Door Front Panel Assembly
For OPL and ALL Coin Models Mfd. prior to November 3, 2000
Illus. No.
Part No.
Qty.
1
875300*
1
875311
1
154215
170330
150309
121405
2
1
9
1
2
3
4
5
*
Description
Right Hand Insulated Front Panel Assembly (Latch Type) Complete
(includes illus. nos. 1 through 3 and 6)
Stainless Steel Right Hand Insulated Front Panel Assembly (Latch Type)
Complete
(includes illus. nos. 1 through 3 and 5)
1/8" Pop Rivet
Friction Door Latch
#10-16 x 1/2" Hex Head TEK Crimptite Screw
Rubber Grommet
Specify color when ordering.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
27
Basket (Tumbler)/Support Assemblies
Illus. No.
1*
2
3
4
5
6
7
8
9
10
11
--*
Part No.
Qty.
800703
800803
1
1
800813
1
150309
301304
150518
100915
153004
800603
850049
152005
153005
153004
116002
401010
40
4
1
4
4
1
1
4
4
4
1
1
Description
Basket (Tumbler) ONLY (without Felt Collar)
Non-Reversing Basket (Tumbler) and Support Assembly
(includes illus. nos. 1 through 10)
Reversing Basket (Tumbler) and Support Assembly
(includes illus. nos. 1 through 10)
#10-16 x 1/2" Hex Head TEK Crimptite Screw
Basket (Tumbler) Rib ONLY
5/16-18 x 3/8" Socket Button Head Screw
3/8-16 x 31" Tie Rod
3/8" Flat Washer
Non-Reversing Basket (Tumbler) Support ONLY
Reversing Basket (Tumbler) Support ONLY
3/8-16 Hex Nut
3/8" Lock Washer
3/8" Flat Washer
Felt Collar ONLY
#847 Adhesive for Felt Collar (5.0 oz. tube)
Felt collar is not included and must be ordered separately.
NOTE: For stainless steel basket (tumblers), contact factory.
Telephone: (508) 678-9000
Fax: (508) 678-9447
28
Basket (Tumbler) Bearing Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Basket (Tumbler) Bearing Assembly
Illus. No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Qty.
880203
153005
152005
150508
153005
152005
150600
153004
153005
152005
150501
153002
153001
150621
152004
801101
1
4
4
2
2
2
2
*
2
2
4
4
4
2
2
1
801103
1
17
18
801105
801104
880779
1
1
1
19
20
21
880202
152004
150610
101100
1
2
2
1
101118
1
101119
1
100735
154301
100713
100108
1
2
1
1
100106
1
824807
1
22
23
24
25
*
Part No.
29
Description
1-3/8" Flange Bearing
3/8" Lock Washer
3/8-16 Hex Nut
3/8-16 x 3/4" Hex Head Machine Bolt
3/8" Lock Washer
3/8-16 Hex Nut
3/8-16 x 1-1/2" Hex Head Machine Bolt
3/8" Flat Washer
3/8" Lock Washer
3/8-16 Hex Nut
5/16-18 x 3/4" Hex Head Machine Bolt
5/16" Lock Washer
5/16" Flat Washer
5/16-18 x 1-1/2" Hex Head Machine Bolt
5/16-18 Hex Nut
1-3/8" Bearing Box Assembly Complete
(includes illus. nos. 4 through 20)
(for models mfd. without Rotational Sensor)
1-3/8" Bearing Box and Support ONLY
(includes illus. nos. 4 through 6, 16 and 17)
1-3/8" Bearing Box ONLY
Pillow Block Bearing Support ONLY
1-3/8" Pillow Block Bearing Assembly with Magnet
(for models mfd. with Rotational Sensor)
1-3/8" Pillow Block Bearing
5/16-18 Hex Nut
5/16-18 x 1-1/2" Allen Setscrew
18" Pulley
(for Non-Reversing Models Only)
18-3/4" Pulley
(for Reversing Models Only)
1-3/8" Taper Lock Hub
(for Reversing models Only)
Shaft Key (for taper lock hub)
5/16-18 x 5/16" Allen Setscrew
1/4" x 1/4" x 7/8" Key
5L-680 V-Belt (basket [tumbler] to idler)
(for Non-Reversing Models Only)
5L-680 V-Belt (basket [tumbler] to idler)
(for Reversing Models Only)
Rotational Sensor Assembly
As required.
Telephone: (508) 678-9000
Fax: (508) 678-9447
30
American Dryer Corporation
Idler Bearing Assembly
88 Currant Road / Fall River, MA 02720-4781
31
Idler Bearing Assembly
Illus. No.
1
Part No.
Qty.
100107
1
100108
1
100106
1
101129
100110
1
1
100103
1
100109
1
100117
1
4
5
6
7
8
9
10
11
154301
100705
301850
150529
100214
153007
152002
801007
2
1
1
3
2
3
3
1
12
13
14
15
16
17
150617
153005
153004
801009
152004
150509
2
2
2
1
1
1
2
3
Telephone: (508) 678-9000
Description
5L-670 V-Belt (idler to basket [tumbler])
(for Non-Reversing models Only)
(for models mfd. as of November 21, 1997)
5L-680 V-Belt (idler to basket [tumbler])
(for Non-Reversing models Only)
(for models mfd. between October 27, 1997 and November 21, 1997)
5L-690 V-Belt (idler to basket [tumbler])
(for Reversing models Only)
(for models mfd. prior to October 27, 1997)
9" x 2-1/2" Compound Pulley
4L-500 V-Belt (idler to motor) 60 Hz ONLY
(for Non-Reversing Models Only)
4L-510 V-Belt (idler to motor) 50 Hz ONLY
(for Non-Reversing Models Only)
4L-650 V-Belt (idler to motor) 50/60 Hz
(for Reversing Models Only)
(for models mfd. as of October 27, 1997)
4L-620 V-Belt (idler to motor) 50/60 Hz
(for Reversing Models Only)
(for models mfd. prior to October 27, 1997)
5/16-18 x 5/16" Allen Setscrew
3/16" x 3/16" x 1-3/8" Key
5/8" x 3/4" Idler Shaft
1/4-20 x 2-1/4" Carriage Bolt
5/8" Flange Bearing
1/ 4" Lock Washer
1/ 4-20 Hex Nut
Idler Bearing Assembly Complete
(includes illus. nos. 5 through 17)
3/8-16 x 1" Hex Head Machine Bolt
3/8" Lock Washer
3/8" Flat Washer
Idler Square Washer
5/16-18 Hex Nut
5/16-18 x 3" Hex Head Machine Bolt
Fax: (508) 678-9447
32
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
Part No.
Qty.
1
100110
100103
100701
101132
101133
150501
153002
153001
100073*
100076
122701
122801
137030
152004
153002
153001
117604
1
1
1
1
1
4
4
4
1
1
8
1
1
4
4
4
4
117600
4
154000
800919
4
1
880915*
1
880944
1
880946*
1
880945*
1
153050
100603
100702
153050
152006
120200
100075
3
1
1
1
2
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
*
33
Description
4L-500 V-Belt (motor to idler assembly) 60 Hz ONLY
4L-510 V-Belt (motor to idler assembly) 50 Hz ONLY
3/16" x 3/16" x 1" Key
5/8" x 2" Motor Pulley (for 60 Hz motors Only)
5/8" x 2-1/4" Motor Pulley (for 50 Hz motors Only)
5/16-18 x 3/4" Hex Head Machine Bolt
5/16" Lock Washer
5/16" Flat Washer
1 HP 120-230v / 1ø / 60 Hz T.E.F.C. Motor (plug type motor)
3/4 HP 240v / 1ø / 50 Hz T.E.F.C. Motor (plug type motor)
Socket Terminal ONLY
Pin/Socket Extraction Tool
8-Pin Housing Connector
5/16-18 Hex Nut
5/16" Lock Washer
5/16" Flat Washer
Neoprene Sponge Tape (sold by the foot)
(for models mfd. as of August 6, 1998)
Noise Suppressor Tape (sold by the foot)
(for models mfd. prior to August 6, 1998)
5/16-18 Tinnerman Nut
1 HP Motor Mount ONLY - 56Z Frame
(includes illus. no. 13)
1 HP 120-230v / 1ø / 60 Hz T.E.F.C. Motor Mount with Plug Motor
(includes illus. nos. 2 through 7 and 13 through 20)
3/4 HP 240v / 1ø / 50 Hz T.E.F.C. Motor Mount Assembly Complete with
Plug Motor
(includes illus. nos. 2 through 7 and 13 through 20)
1 HP 208/230/380/460v / 3ø / 60 Hz T.E.F.C. Motor Mount Assembly
Complete
(includes illus. nos. 3 through 6 and 13 through 22)
1 HP 208/230/380/460v / 3ø / 50 Hz T.E.F.C. Motor Mount Assembly
Complete
(includes illus. nos. 3 through 6 and 13 through 22)
1/2" S.A.E. Flat Washer
16" Impellor with 3/4" Bore
1/8" x 1/8" x 1-1/2" Key
1/2" S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
3/8" x 90° Connector
1 HP 208/230/380/460v / 3ø / 50/60 Hz T.E.F.C. Motor (56Z Frame)
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
34
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly
Illus. No.
1
2
3
4
5*
6
7
8
9*
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
*
Part No.
Qty.
100109
1
100117
1
100701
101132
101133
120200
181003
150501
153002
153001
100075
120200
150501
153002
153001
154000
152004
153002
153001
882398
1
1
1
1
1
4
4
4
1
1
4
4
4
8
4
4
4
1
880948*
1
880947*
1
117604
5
117600
5
153050
100702
100603
153050
152006
3
1
1
1
2
35
Description
4L-650 V-Belt (motor to idler assembly)
(for models mfd. as of October 27, 1997)
4L-620 V-Belt (motor to idler assembly)
(for models mfd. prior to October 27, 1997)
3/16" x 3/16" x 1" Key
5/8" x 2" Motor Pulley (for 60 Hz motors Only)
5/8" x 2-1/4" Motor Pulley (for 50 Hz motors Only)
3/8" x 90° Connector
1/2 HP 208/230/380/460v / 3ø / 50/60 Hz T.E.F.C. Motor (56Z Frame)
5/16-18 x 3/4" Hex Head Machine Bolt
5/16" Lock Washer
5/16" Flat Washer
1 HP 208/230/380/ 460v / 3ø / 50/60 Hz T.E.F.C. Motor (56Z Frame)
3/8" x 90° Connector
5/16-18 x 3/4" Hex Head Machine Bolt
5/16" Lock Washer
5/16" Flat Washer
5/16" Tinnerman
5/16"-18 Hex Nut
5/16" Lock Washer
5/16" Flat Washer
Reversing Motor Mount - 56Z Frame
(includes illus. no. 19)
Reversing T.E.F.C. Motor Mount Assembly Complete - 60 Hz ONLY
(includes illus. nos. 2 through 14 and 18 through 24)
Reversing T.E.F.C. Motor Mount Assembly Complete - 50 Hz ONLY
(includes illus. nos. 2 through 14 and 18 through 24)
Neoprene Sponge Tape (sold by the foot)
(for models mfd. as of August 6, 1998)
Noise Suppressor Tape (sold by the foot)
(for models mfd. prior to August 6, 1998)
1/2" S.A.E. Flat Washer
1/8" x 1/8" x 1-1/2" Key
16" Impellor with 3/4 Bore
1/2" S.A.E. Flat Washer
1/2-20 Left Hand Jam Nut
Specify voltage when ordering.
Telephone: (508) 678-9000
Fax: (508) 678-9447
36
Sensor Bracket Assemblies
Microprocessor
Sensor
Bracket
Assembly
Non-Computer
Sensor
Bracket
Assembly
MAN0238
Illus. No.
Part No.
Qty.
1
880251
1
2
3
4
5
6
7
8
9
10
130103
153010
152000
121028
122701
122605
154007
150005
801425
1
2
2
2
4
1
2
2
1
11
12
13
14
15
305007
122604
122700
150301
150005
130111
1
1
4
2
*
1
130100
1
American Dryer Corporation
Description
1/4" Temperature Sensor Probe Assembly
(includes illus. nos. 1 and 5 through 8)
225° Large Automatic Reset Thermostat
#6 Star Washer
#6-32 Hex Nut
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
1/4" Tinnerman Push On Fastener
#6-32 x 1/ 4" Round Head Machine Screw
Microprocessor Sensor Bracket Assembly Complete
(includes illus. nos. 1 through 10)
Universal Sensor Bracket ONLY
4-Pin Connector ONLY
Pin Terminal ONLY
#8-18 x 7/16" Phillips Pan Head TEK Screw
#6-32 x 1/4" Round Head Machine Screw
130° Large Thermostat
(for models mfd. as of August 1, 1993)
150° Large Thermostat
(for models mfd. prior to August 1, 1993)
88 Currant Road / Fall River, MA 02720-4781
Sensor Bracket Assemblies (continued)
Illus. No.
16
Part No.
Qty.
130100
1
130103
1
17
130103
1
18
130101
1
130106
1
153010
152000
840065
*
*
1
840063
1
121028
122701
122605
**
***
1
122609
1
831702
1
801405
1
801418
1
801430
1
305007
122608
1
1
122604
1
122700
122801
150301
***
1
2
19
20
21
22
23
24
25
26
27
28
37
Description
150° Large Thermostat
(for models mfd. as of August 1, 1993)
225° Large Automatic Thermostat
(for models mfd. prior to August 1, 1993)
225° Large Automatic Reset Thermostat
(for ALL models mfd. as of August 1, 1993)
180° Large Thermostat
(for models mfd. prior to April 22, 1994)
170° Large Thermostat
(for models mfd. as of April 22, 1994)
#6 Star Washer
#6-32 Hex Nut
Sensor Jumper (4)
(for ALL models mfd. as of August 1, 1993)
Sensor Jumper (3) ONLY
(for models mfd. prior to August 1, 1993)
Insulated Terminal ONLY
Socket Terminal ONLY
4-Pin Socket Connector ONLY
(for ALL models mfd. as of August 1, 1993)
3-Pin Socket Connector ONLY
(for models mfd. prior to August 1, 1993)
Sensor (4) Bracket Harness Assembly
(includes illus. nos. 22 through 24)
(for ALL models mfd. as of August 1, 1993)
Non-Computer Sensor (3) Bracket Assembly Complete-includes Thermostats
(includes illus. nos. 14 through 16 and 18 through 25)
(for models mfd. prior to August 1, 1993)
Non-Computer Sensor (4) Bracket Assembly Complete-includes Thermostats
(includes illus. nos. 14 through 25)
(for models mfd. from August 1, 1993 to April 22, 1994)
Non-Computer Sensor (4) Bracket Assembly Complete-includes Thermostats
(includes illus. nos. 14 through 25)
(for models mfd. as of April 4, 1994)
Universal Sensor Bracket ONLY
3-Pin Connector ONLY
(for models mfd. prior to August 1, 1993)
4-Pin Connector ONLY
(for ALL models mfd. as of August 1, 1993)
Pin Terminal ONLY
Pin/Socket Extraction Tool
#8-18 x 7/16" Phillips Pan Head TEK Screw
* Qty= 4 or 5
** Qty= 5 or 8
*** Qty= 3 or 4
Telephone: (508) 678-9000
Fax: (508) 678-9447
38
American Dryer Corporation
Direct Spark Ignition (DSI) Burner Assembly
88 Currant Road / Fall River, MA 02720-4781
39
Direct Spark Ignition (DSI) Burner Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
318030
150300
150309
128915
880134
1
2
2
1
1
5
6
7
8
9
10*
880330
150103
153000
151001
141105
140823
140820
140808
140806
141232
318700
150300
128927
880960
140411
318712
150309
881367
142809
150299
880815
850898
1
3
3
3
3
3
3
3
3
1
1
2
1
1
1
1
4
1
1
2
1
1
850852
1
809627**
809628**
880928**
880929**
1
1
1
1
11
12
13
14
15
16
17
18
19
20
21
---------
Description
DSI (Direct Spark Ignition) Burner Shield
#10 x 1/2" Hex Washer TEK Screw
#10-16 x 1/2" Hex Head TEK Crimptite Screw
DSI Ignitor/Flame-Probe Assembly
Ignitor/Flame-Probe Kit Assembly
(includes illus. nos. 4 and 5)
High Voltage (HV) Wire and Connector Assembly
#8-32 x 3/4" Pan Head Machine Screw
#8 Steel Burr
#8-32 Pal Nut
Large Tube Burner
#26 Natural Gas Burner Orifice - 60 Hz ONLY
#29 Natural Gas Burner Orifice - 50 Hz ONLY
#44 Liquid Propane (L.P.) Gas Burner Orifice - 60 Hz ONLY
#46 L.P. Gas Burner Orifice - 50 Hz ONLY
1/2" DSI Manifold (3-Port)
Pipe Bracket (bent)
#10 x 1/2" Hex Washer TEK Screw
1/2" 24 VAC Redundant (natural gas) Gas Valve
1/2" 24 VAC Redundant (L.P. gas) Gas Valve
1/2" Valve L.P. Conversion Kit
GV Pipe Bracket
#10-16 x 1/2" Hex Head TEK Crimptite Screw
1/2" Union Shut Off with Tail Piece
1/2" x 29-1/8" Pipe
#10 x 1" Hex Washer TEK Screw
ADC DSI Module ONLY (50/60 Hz)
Non-Heat Reclaimer Burner Box ONLY
(for models mfd. as of November 17, 1997)
Non-Heat Reclaimer Burner Box ONLY
(for models mfd. prior to November 17, 1997)
SUPER AD-30 Natural Gas Burner Assembly Complete less Orifices
SUPER AD-30 L.P. Gas Burner Assembly Complete less Orifices
SUPER AD-30 L.P. Conversion Kit (for 60 Hz models)
SUPER AD-30 L.P. Conversion Kit (for 50 HZ models)
* Contact factory for elevations over 2,000 feet.
** Burner orifices are not included and must be ordered separately.
Telephone: (508) 678-9000
Fax: (508) 678-9447
40
Electric Oven Assembly
ELECTRIC OVEN (FRONT VIEW)
ELECTRIC OVEN (REAR VIEW)
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
41
Electric Oven Assembly
Illus. No.
Part No.
Qty.
1
803007*
---------*
---------*
150300
802800
802801
1
1
2
1
1
154004
150309
802799
122200
150303
105500
319202
154002
150300
803100
320611
150402
130400
150300
154001
121010
152014
--------*
--------*
120081
120080
152008
121011*
---------*
153009
320607
150402
1
2
1
1
2
1
1
1
2
1
1
2
1
2
1
1
3
1
1
1
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
*
Description
Large Electric Oven Box ONLY
Electric Oven Assembly Complete
Electric Element
#10 x 1/2" Hex Washer TEK Screw
Sail Switch Box with Cover and Bracket ONLY
Sail Switch Box Assembly Complete
(includes illus. nos. 4 through 12)
Twin Speed Nut
#10-16 x 1/2" Hex Head TEK Crimptite Screw
Sail Switch Box Cover ONLY
Sail Switch
#4 x 3/4" Pan Head "A" Machine Screw
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8" Push On Fastener
#10 x 1/2" Hex Washer TEK Screw
Electric Oven Front Cover ONLY
Large Relay Box Cover ONLY
#10-24 x 5/8" Slotted Truss Head Machine Screw
290° Hi-Limit
#10 x 1/2" Hex Washer TEK Screw
#10-24 Speed Nut
L-70 Ground Lug
1/4-20 Free Spin Wash Nut
Oven Relay
Oven Relay Replacement Coil
Internal Ceramic Insulator (2 per element)
External Ceramic Insulator (2 per element)
#10-32 Hex Nut (4 per element)
Bus Bar (sold by the foot)
Terminal Lug
#10 Star Washer (2 per element)
Large Electric Oven Right Side Cover ONLY
#10-24 x 5 / 8" Slotted Truss Head Machine Screw
Refer to Electric Oven Component Application Chart on page 55.
Telephone: (508) 678-9000
Fax: (508) 678-9447
42
Illus. No.
Single-Phase (1ø) Motor, Electric Relay Panel Assembly
Part No.
Qty.
1
2
3
132451
150299
824828
1
2
1
-
322809
150301
1
4
American Dryer Corporation
Description
2-Pole Contactor - 24 VAC
#10 x 1" Hex Head Screw
RC Network with Connectors
(for microprocessor [computer] controlled models Only)
Back Electrical Box Cover...Not Illustrated
#8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated
88 Currant Road / Fall River, MA 02720-4781
43
3-Phase (3ø) Motor, Electric Relay Panel Assembly
Illus. No.
1
2
Part No.
Qty.
322812
132430
1
1
132432
1
3
4
5
6
7
8
9
10
11
12
13
150103
151001
153002
152004
120701
150008
151000
121300
137015
150300
---------
2
2
1
1
1
2
2
3
1
2
-
-----
322809
150301
1
4
Telephone: (508) 678-9000
Description
Back Electrical Box Component Plate
Impellor Contactor - 24 VAC
(208/230/240v - 50/60 Hz )
Impellor Contactor Replacement Coil - 24 VAC
(208/230/240v - 50/60 Hz)
#8-32 x 3/4" Phillips Round Head Machine Screw
#8-32 Pal Nut
5/16-18 Lock Washer
5/16-18 Hex Nut
4-Position Terminal Block
#6-32 x 1-1/4" Slotted Round Head Machine Screw
#6-32 Pal Nut
Open/Close Bushing
RC Filter (for microprocessor [computer] controlled models Only)
#10 x 1/2" Hex Washer TEK Screw
Transformer - 24 VAC
(refer to Transformer Usage Listings on page 53 and page 54)
Back Electrical Box Cover...Not Illustrated
#8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated
Fax: (508) 678-9447
44
Illus. No.
1
2
3
4
Microprocessor Reversing Rear Control Box Assembly
Part No.
Qty.
322812
137060
137013
132431
1
1
4
1
132432
1
150103
151001
153002
152004
132430
2
2
1
1
1
132432
1
10
11
12
13
14
15
16
17
150103
151001
120701
150008
151000
121300
150300
---------
2
2
1
2
2
3
2
-
-----
322809
150301
1
4
5
6
7
8
9
American Dryer Corporation
Description
Back Electrical Box Component Plate
Arc Suppressor (A.S.) Board
Nylon Standoff
Reversing Contactor - 24 VAC
(208/230/240v - 50/60 Hz)
Reversing Contactor Replacement Coil - 24 VAC
(208/230/240v - 50/60 Hz)
#8-32 x 3/4" Phillips Round Head Machine Screw
#8-32 Pal Nut
5/16-18 Lock Washer
5/16-18 Hex Nut
Impellor Contactor - 24 VAC
(208/230/240v - 50/60 Hz )
Impellor Contactor Replacement Coil - 24 VAC
(208/230/240v - 50/60 Hz)
#8-32 x 3/4" Phillips Round Head Machine Screw
#8-32 Pal Nut
4-Position Terminal Block
#6-32 x 1-1/4" Slotted Round Head Machine Screw
#6-32 Pal Nut
Open/Close Bushing
#10 x 1/2" Hex Washer TEK Screw
Transformer - 24 VAC
(refer to Transformer Usage Listings on page 53 and page 54)
Back Electrical Box Cover...Not Illustrated
#8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated
88 Currant Road / Fall River, MA 02720-4781
45
Dual Timer Reversing Rear Control Box Assembly
Illus. No.
1
2
3
4
Part No.
Qty.
322812
132198
150301
132431
1
1
2
1
132432
1
150103
151001
153002
152004
132430
2
2
1
1
1
132432
1
10
11
12
13
14
15
16
17
150103
151001
120701
150008
151000
121300
150300
---------
2
2
1
2
2
3
2
-
-----
322809
150301
1
4
5
6
7
8
9
Telephone: (508) 678-9000
Description
Back Electrical Box Component Plate
Reversing Timer - 24 VAC (50/60 Hz)
#8-18 x 7/16" Phillips Pan Head TEK Screw
Reversing Contactor - 24 VAC
(208/230/240v - 50/60 Hz)
Reversing Contactor Replacement Coil - 24 VAC
(208/230/240v - 50/60 Hz)
#8-32 x 3/4" Phillips Round Head Machine Screw
#8-32 Pal Nut
5/16-18 Lock Washer
5/16-18 Hex Nut
Impellor Contactor - 24 VAC
(208/230/240v - 50/60 Hz )
Impellor Contactor Replacement Coil - 24 VAC
(208/230/240v - 50/60 Hz)
#8-32 x 3/4" Phillips Round Head Machine Screw
#8-32 Pal Nut
4-Position Terminal Block
#6-32 x 1-1/4" Slotted Round Head Machine Screw
#6-32 Pal Nut
Open/Close Bushing
#10 x 1/2" Hex Washer TEK Screw
Transformer - 24 VAC
(refer to Transformer Usage Listing on page 53 and page 54)
Back Electrical Box Cover...Not Illustrated
#8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated
Fax: (508) 678-9447
46
American Dryer Corporation
Steam Coil/Air Operated Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
Steam Coil/Air Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1
2
3
4
5
6
7
165008
153002
152004
152002
153007
820321
803416
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
153007
152002
115995
102350
151006
152051
100495
323365
152002
153007
100472
143110
100472
100496
143238
100498
150002
153010
152000
330987
152002
153007
100520
4
4
60
1
1
1
1
2
2
2
1
1
1
1
1
1
2
2
2
1
2
2
1
Telephone: (508) 678-9000
47
Description
Steam Coil Assembly
5/16" Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4" Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
1/4" Lock Washer
1/4-20 Hex Nut
Steam Damper Gasket (sold by the inch)
68-1/2" Long Steam Damper Foam Gasket
5/16-24 Stainless Steel Acorn Nut
5/16-24 Right Hand Jam Nut
11/16" x 3" Stroke Piston
Left and Right Piston Support
1/4-20 Hex Nut
1/4" Lock Washer
1/4" Poly x 1 / 8" M.P.T. Connector
1/4" Poly-Flo Tubing (sold by the foot)
1/4" Poly x 1/ 8" M.P.T. Connector
1/8" Needle Valve
1/8" Brass Close Nipple
3-Way Micro Valve - 24 VAC
#6-32 x 1" Machine Bolt
#6 Star Washer
#6-32 Hex Nut
Micro Valve Support
1/4-20 Hex Nut
1/4" Lock Washer
1/8" N.P.T. Silencer (muffler)
Fax: (508) 678-9447
48
American Dryer Corporation
Steam Coil/Mechanical Steam Damper Assembly
88 Currant Road / Fall River, MA 02720-4781
49
Steam Coil/Mechanical Steam Damper Assembly
Illus. No.
*
Part No.
Qty.
1
2
3
4
5
6
7
165008
153002
152004
152002
153007
820321
880780
1
6
6
4
4
2
1
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
115995
102350
309300
154300
153022
104052
150110
153012
312315
153022
154300
850268
150110
153012
312315
104054
100511
122120
150026
122120
150026
153012
150102
---------*
60
1
1
1
1
1
2
2
1
1
1
1
2
2
1
1
1
1
2
1
2
2
2
1
Description
Steam Coil Assembly
5/16" Lock Washer
5/16-18 Hex Nut
1/4-20 Hex Nut
1/4" Lock Washer
Steam Damper Hinge Assembly
Steam Damper Assembly
(includes illus. nos. 7 through 10)
Steam Damper Gasket (sold by the inch)
68-1/2" Long Steam Damper Foam Gasket
Rod Bracket
1/2" x 3/32" Cotter Pin
#10 Steel Burr
Mechanical Steam Damper Actuator Rod
#8-32 x 1/4" Phillips Head Machine Screw
#8 Star Washer
Mechanical Steam Damper Motor Mount
#10 Steel Burr
1/2" x 3/32" Cotter Pin
Mechanical Steam Damper Arm
#8-32 x 1/4" Phillips Head Machine Screw
#8 Star Washer
Mechanical Steam Damper Motor Mount
Mechanical Steam Damper Motor
Mechanical Steam Damper Switch Plate
Mechanical Steam Damper Switch
#4-40 x 5/8" Phillips Pan Head Machine Screw
Mechanical Steam Damper Switch
#4-40 x 5/8" Phillips Pan Head Machine Screw
#8 Star Washer
#8-32 x 3/8" Pan Head Machine Screw
Mechanical Steam Damper Motor Cam
The Mechanical Steam Damper Motor Cam is part of the Mechanical Steam Damper Motor.
Telephone: (508) 678-9000
Fax: (508) 678-9447
50
Illus. No.
Sail Switch/Hi-Limit Assembly
Part No.
Qty.
1
2
3
4
5
6
7
8
9
154004
150309
802799
150303
122200
105500
319202
154002
802800
802801
1
2
1
2
1
1
1
1
1
1
10
11
12
13
14
15
16
142809
150309
319704
151000
150001
130401
143000
1
2
1
2
2
1
1
American Dryer Corporation
Description
Twin Speed Nut
#10-16 x 1/2" Hex Head TEK Crimptite Screw
Sail Switch Box Cover and Bracket ONLY
#4 x 3/4" Pan Head "A" Machine Screw
Sail Switch ONLY
Sail Switch Actuator Rod
Sail Switch Damper (flat)
1/8" Push On Fastener
Sail Switch Box with Cover and Bracket ONLY
Sail Switch Assembly Complete
(includes illus. nos. 1 through 8)
1/2" x 29-1/8" Pipe
#10-16 x 1/2" Hex Head TEK Crimptite Screw
Hi-Limit Mounting Bracket ONLY
#6-32 Pal Nut
#6-32 x 1/2" Round Head Machine Screw
330° Hi-Limit ONLY
1/2" x 3/4" Reducing Coupling
88 Currant Road / Fall River, MA 02720-4781
Outer Top/Back Guard Assembly
Illus. No.
Part No.
Qty.
1
2
3
322809
150301
330077
1
4
1
4
5
6
150301
150301
312510
7
10
1
7
8
9
314409
150301
103500
1
13
4
Telephone: (508) 678-9000
51
Description
Back Electrical Box Cover
#8-18 x 7/16" Phillips Pan Head TEK Screw
Top Back Guard
(No Top Back Guard on Steam Models)
#8-18 x 7/16" Phillips Pan Head TEK Screw
#8-18 x 7/16" Phillips Pan Head TEK Screw
Outer Top
(No Outer Top on Steam Models)
Bottom Back Guard
#8-18 x 7/16" Phillips Pan Head TEK Screw
Leveling Leg
Fax: (508) 678-9447
52
Coin Acceptor Listing
NOTE: Coin Acceptors listed included Optical Switch (ADC Part No. 137056).
Single Coin*
ADC Part No.
Nation
Description
125100
125101
125114
125120
125124
125107
125130
125123
881604
125103
125121
125129
125132
125133
U.S. and Canada
United Kingdom
United Kingdom
France
France
Australia
Australia
New Zealand
Japan
------Singapore
Hong Kong
25¢ Optic Coin Acceptor
10 New Pence Optic Coin Acceptor
20 New Pence Optic Coin Acceptor
2 French Franc Optic Coin Acceptor
5 French Franc Optic Coin Acceptor
20¢ Australian Optic Coin Acceptor
$1 Australian Optic Coin Acceptor
50¢ New Zealand Optic Coin Acceptor
100 Yen Hanke Optic Coin Acceptor
.882 Token Optic Coin Acceptor
.800 Token Optic Coin Acceptor
Muller Token Optic Coin Acceptor
50¢ Singapore Optic Coin Acceptor
$1 Hong Kong Optic Coin Acceptor
Dual Coin*
881508
881842
881542
881846
125134
125126
*
U.S. and Canada
Canada
United Kingdom
France
Denmark
Netherlands
10¢/25¢ Hanke Dual Optic Coin Acceptor
25¢/$1 Hanke Dual Optic Coin Acceptor
1£/20 Pence Hanke Dual Optic Coin Acceptor
2/5 Franc Hanke Dual Optic Coin Acceptor
1/5 Danish Krone Dual Optic Coin Acceptor
25¢/1 Guilder Dual Optic Coin Acceptor
Consult factory for Coin Acceptors not listed.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
53
Step Down Transformer Usage Listing for Gas/Steam Dryers
HEAT
Gas
Steam
VOLTAGE
WIRE STEP D OWN TRANSFORMER CONTROL VOLTAGE
SERVICE
PART N O.
PART N O.
208-240
3or 4
--------
141403
380
3
132059
141403
380
4
132059
141403
416
3
132062
141403
416
4
132062
141403
460/480
3
132053
141403
460/480
4
132053
141403
575
3
132050
141403
NOTE: Information not listed was not available at time of printing contact factory.
Telephone: (508) 678-9000
Fax: (508) 678-9447
54
Transformer Usage Listing for Electric Dryers
WIRE
STEP D OWN TRANSFORMER
SERVICE
PART N O.
CONTROL VOLTAGE
PART N O.
KW
VOLTAGE
PHASE
48
208
3ø
3 or 4
--------
--------
48
240
3ø
3
--------
--------
48
380
3ø
3 or 4
--------
--------
48
416
3ø
3 or 4
--------
--------
48
460/480
3ø
3 or 4
--------
--------
42
208
3ø
3 or 4
--------
--------
42
240
3ø
3
--------
--------
42
380
3ø
3 or 4
--------
--------
42
416
3ø
3 or 4
--------
--------
42
460/480
3ø
3 or 4
--------
--------
40
208
3ø
3 or 4
--------
--------
40
240
3ø
3
--------
--------
40
380
3ø
3 or 4
132059
141403
40
416
3ø
3 or 4
132062
141403
40
460/480
3ø
3 or 4
132053
141403
36
208
3ø
3 or 4
--------
132070
36
240
3ø
3
--------
132070
36
380
3ø
3 or 4
132059
141403
36
416
3ø
3 or 4
132062
141403
36
460/480
3ø
3 or 4
132053
141403
30
208
3ø
3 or 4
--------
132070
30
240
3ø
3
--------
132070
30
380
3ø
3 or 4
132059
141403
30
416
3ø
3 or 4
132062
141403
30
480
3ø
3
132053
141403
NOTE: Information not listed was not available at time of printing contact factory.
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
55
Electric Oven Component Application Chart
W IR-
KW
VOLT
P HASE
48
208
3ø
3 or 4
48
240
3ø
3
48
380
3ø
3 or 4
*
E
OVEN ASSY*
TERM INAL
L UG
OVEN W IRE
E LEM ENTS
QTY.
KW
PART NO.
881624
6
8
120051
5
---
-
-
---
-
---
-
-
---
-
OVEN RELAY
PART NO.
QTY.
PART NO.
BUS B AR
P/N 121011
CAT. NO.
PART NO.
#4
133300
6
121010
1
DPA63
131369
-
---
-
---
-
---
---
-
---
-
---
-
---
---
QTY. SIZE
48
416
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
48
460/480
3ø
3 or 4
825079
6
8
120052
4
#2
133302
6
121010
1
DFAJ
131361
44
400
3ø
4
881625
6
8
120052
5
#6
133200
4
121010
1
DPA63
131369
42
208
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
42
240
3ø
3
---
-
-
---
-
-
---
-
---
-
---
---
42
380
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
42
416
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
42
460/480
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
40
208
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
40
240
3ø
3
---
-
-
---
-
-
---
-
---
-
---
---
40
380
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
40
400
3ø
4
830331
6
6.6
120027
4
#6
133200
6
121010
1
DEAJ
131365
40
416
3ø
3 or 4
824922
6
6.6
120027
4
#6
133200
6
121010
1
DFAJ
131361
40
460/480
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
36
208
3ø
3 or 4
824921
6
6
120015
4
#2
133302
6
121010
1
GEAJ
131385
36
240
3ø
3 or 4
824920
6
6
120014
4
#4
133300
6
121012
1
FEAJ
131375
36
380
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
36
400
3ø
4
830209
6
6.6
120027
4
#6
133200
3
121010
1
DFAJ
131361
36
416
3ø
3 or 4
---
-
-
---
-
-
---
-
---
-
---
---
36
480
3ø
3 or 4
824026
6
6
120014
4
#8
133100
5
121010
1
DPA43
131357
30
208
3ø
3 or 4
824917
6
5
120012
3
#4
133200
5
121012
1
FEAJ
131375
30
240
3ø
3
824934
6
5
120013
3
#4
133300
5
121012
1
FEAJ
131375
30
380
3ø
3 or 4
824976
6
5
120000
4
#8
133100
6
121010
2
DPA43
131357
30
416
3ø
3 or 4
824949
6
5
120012
4
#8
133100
6
121010
2
DPA43
131357
30
480
3ø
3 or 4
824955
6
5
120013
4
#8
133100
6
121010
2
BFAJ
131351
Oven Assemblies do not include Oven Relay (contactor). This item must be ordered separately. When
ordering Oven Assembly Complete, specify 3 wire or 4 wire service as well as if the dryer has
microprocessor controls.
NOTE: Information not listed was not available at time of printing contact factory.
Telephone: (508) 678-9000
Fax: (508) 678-9447
56
Part Number
112027
112039
112280
112041
112534
112533
120100
120200
120300
120400
120500
120600
120800
120802
120902
120903
121006
121014
121026
121499
121500
121503
122804
404500
404502
404506
404507
880200
Additional Parts Available
Description
"Water Washed Fabrics" Label
"Black / White / Green Ground" Label
"Clean Lint Screen" Label
"CAUTION - Exhaust/Lint Screen" Label
"Phase 5 OPL Program Location Summary" Label
"Phase 5 Coin Program Location Summary" Label
3/8" Straight BX Connector
3/8" x 90° BX Connector
3/8" x 45° BX Connector
3/8" Red Jacket BX Insulator
3/8" Jiffy Clip BX Retainer Clip
3/8" Greenfield BX
1/4" In-Line Connector
Red Butt Connector
#74B Wire Nut
Crimp-on Wire Nut
#10 Insulated Ring Terminal
1/4" Insulated (Female) Terminal
Tab Receptacle Combination
4" Harness Tie
7" Harness Tie
Harness Tie Mounting Clip
Manometer (water column test gauge)
Almond Brush-in-Cap Bottle Touch-Up Paint
White Brush-in-Cap Bottle Touch-Up Paint
Beige Brush-in-Cap Bottle Touch-Up Paint
Cornflower Blue Brush-in-Cap Bottle Touch-Up Paint
Electrical Terminal (assortment) Kit
American Dryer Corporation
88 Currant Road / Fall River, MA 02720-4781
ADC 450144
1 - 10/11/94-100
4 * 12/28/98-50
2 * 10/30/95-100
5 * 03/02/00-50
3 * 08/07/97-50
6 * 10/12/01-25