Download Alvin WSF36 User's Manual
Transcript
Assembly Instructions for Mobile Step-Design File Tube Rack No. WSF36 Key A B C D E F G H Qty. 2 1 2 1 1 4 1 1 CONTENTS Description Large Side Grids Back Grid Center Grids Front Grid Bottom Step Casters Bag Small Clips Bag Large Clips H C G B & D A F E NOTE: Plastic clips can be snapped on and removed easily by hand. Most grid sections require only 2 clips per side for support. For safety, clips attached on exterior of cart should be positioned with flanges facing inward. (See reverse side for assembly) CLIP ATTACHMENT TAIWAN Assembly Instructions for No. WSF36 (cont.) 1. Attach casters (F) to each of the large size grids (A). 2. Using large plastic clips, attach one large grid (A) to the back grid (B), then attach the other large grid (A) to the other side of grid (B). Attach center grid (C) to bottom. 3. Drop in bottom step base (E). 4. Attach front grid (D) to side grids (A). Using small clips, attach grid (C) to grids (A). 5. Attach extra clips where needed. Alvin & Company, Inc. Bloomfield, CT Grand Prairie, TX Rancho Cordova, CA A98000 06/98