Download ADC ADG-758 User's Manual
Transcript
ADG-758 (Gas - DSI) Parts Manual American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 e-mail: [email protected] www.amdry.com 081999MFM/abe ADC Part No. 450419 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY POUR VOTRE SÉCURITÉ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables à proximité de cet appareil ou de tout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE ___________________________ RESELLER’S NAME Serial Number(s) ADG-758 MODEL NO. __________________________________________ ______________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. “IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer. Table of Contents Control Door Assembly Without Trim .................................................................................................. 2 Control Door Assembly With Trim ...................................................................................................... 3 Phase 5 OPL Microprocessor Control Panel Assembly ......................................................................... 4 Phase 5 Coin Microprocessor Control Panel Assembly ......................................................................... 5 Phase 5 Coin and OPL Microprocessor Control Box Assembly ............................................................ 6 Coin Vault Assembly .......................................................................................................................... 7 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 3, 2000 .................................................................................... 8 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 ................................................................................ 9 Dual Timer Control Box Assembly .................................................................................................... 10 Front Panel Assembly for Plastic Door .............................................................................................. 11 “Plastic” Main Door Assembly .......................................................................................................... 12 Main Door Switch Housing for Plastic Door ...................................................................................... 13 Main Door “Cold Rolled Steel (CRS)” Assembly ............................................................................... 14 Main Door Switch Assembly Cold Rolled Steel (CRS) Door .............................................................. 15 Cold Rolled Steel (CRS) Door Front Panel ....................................................................................... 16 Basket (Tumbler)/Support Assemblies ............................................................................................... 17 Drop Lint Door Assembly Without Trim ............................................................................................. 18 Drop Lint Door Assembly With Trim For All Coin Models .................................................................................................................. 19 Lint Trap Assembly .......................................................................................................................... 20 Idler Bearing Assembly .................................................................................................................... 21 Basket (Tumbler) Bearing Assembly ............................................................................................ 22, 23 Non-Reversing T.E.F.C. Motor Mount Assembly ......................................................................... 24, 25 Reversing T.E.F.C. Motor Mount Assembly ................................................................................. 26, 27 Sensor Bracket Assemblies ........................................................................................................ 28, 29 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of April 15, 2000 ................................................................................... 30, 31 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to April 15, 2000 ............................................................................... 32, 33 Single-Phase (1Ø) Motor, Electric Relay Panel Assembly ................................................................... 34 3-Phase (3Ø) Motor, Electric Relay Panel Assembly .......................................................................... 35 Microprocessor Reversing Rear Control Box Assembly ...................................................................... 36 Dual Timer Reversing Rear Control Box Assembly ............................................................................. 37 Outer Top/Back Guard Assemblies ................................................................................................... 38 Microprocessor Coin Acceptors Listing ............................................................................................. 39 Step Down Transformer Usage Listing ............................................................................................... 40 Additional Parts Available ................................................................................................................. 41 2 Control Door Assembly Without Trim Illus. No. Part No. Qty. 1 881053 870011 881045* 1 1 1 881046 1 117604 150300 102600 102601 102502 160005 4 4 1 1 1 2 2 3 4 5 6 7 8 * Description ADC Logo ONLY Logo Double Adhesive Tape Kit ONLY Control Door (includes illus. nos. 2, 3, and 8) Stainless Steel Control Door (includes illus. nos. 2, 3, and 8) Neoprene Sponge Tape (sold by the foot) #10-16 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Retainer Clip Control Door Rod Turn Latch Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 3 Control Door Assembly With Trim Illus. No. Part No. Qty. 1 160015 160017 160104 160016 881053 870011 800020* 1 1 1 1 1 1 1 800144 1 180202 117603 150201 150309 102600 102601 102502 1 3 6 4 1 1 1 2 3 4 5 6 7 8 9 10 11 * Description High Security MK-100 Lock Assembly with Key (for coin models Only) Special Dummy Lock (for non-coin models Only) MK-100 Key Lock Cam ADC Logo Logo Double Tape Kit High Security Control Door Assembly (includes illus. nos. 4 through 7) Stainless Steel High Security Control Door Assembly (includes illus. nos. 4 through 7) Top Trim Strip (gray) with Lock Hole (38-1/4” length) Suppressor Tape/Gasket (sold by the foot) #10-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 4 Phase 5 OPL Microprocessor Control Panel Assembly Illus. No. 1 2 3 4 5 6 7 Part No. Qty. 112535 112276 112275 1 1 1 112277 1 112278 1 801255 801256 801206 1 1 1 801207 1 137222 137231 824998 153010 150005 150429 150433 136048 1 1 1 2 2 1 1 1 Description OPL English Keyboard Label Assembly OPL Stick-On Labels (English Only)...Not Illustrated 3-Language OPL Stick-On Labels...Not Illustrated (Spanish, Italian, and Hebrew) 3-Language OPL Stick-On Labels...Not Illustrated (English, Spanish, and Hebrew) 5-Language OPL Stick-On Labels...Not Illustrated (Italian, Dutch, French, German, and Chinese) Phase 5 Microprocessor Control Panel Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6) Phase 5 OPL Non-Reversing Microprocessor Controller (computer) ONLY Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw #10-16 x 1/2” TORX Head Crimptite Screw TORX Hand Driver (for removal of TORX head screw) 1/8-Amp (Slo-Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 5 Phase 5 Coin Microprocessor Control Panel Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 * Part No. Qty. 112526 801213 1 1 801229 1 801259 801258 150309 137213 824998 153010 150005 -------- 1 1 1 1 1 2 2 1 137056* 137023* 137021* 880772 824080 122800 136048 1 1 3 1 1 1 1 Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, and 4 through 6) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, and 4 through 6) Coin Control Panel Coin Control Panel ONLY with Battery Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Microprocessor Controller (computer) Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Coin Acceptor (refer to Microprocessor Coin Acceptors Listing on page 39) Optic Switch Optic Switch Connector Microprocessor Socket ONLY Single Coin Optical Switch Harness Dual Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo-Blo) Fuse For dual coin models double the quantity shown. IMPORTANT: Check label on computer chip to verify correct part number of controller (computer). Telephone: (508) 678-9000 Fax: (508) 678-9447 6 Phase 5 Coin and OPL Microprocessor Control Box Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 * Part No. 141403 150300 120715 150002 151000 136057 150301 136008 122641 122706 112801 Qty. 1 2 1 2 2 * * * 1 * 1 Description Transformer - 24 VAC #10-16 x 1/2” Hex Washer TEK Screw 30-Position Terminal Block #6-32 x 1” Phillips Round Head Machine Screw #6-32 Pal Nut 1/2-Amp (Slo-Blo) Fuse #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip 15-Pin Microprocessor Connector Socket Pin/Socket Extraction Tool...Not Illustrated As required. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 7 Coin Vault Assembly Illus. No. 1 Qty. 802112 1 4 802117 160028 875061 160105* 802020 1 1 1 1 1 5 6 7 8 9 802019 125915 802018 152014 102502 102601 102600 1 1 1 4 1 1 1 2 3 * Part No. Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Cam for 1/4 Turn Lock 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key ONLY 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) 1/4 Turn Coin Box ONLY without Faceplate High Security (Greenwald) Coin Box ONLY with Key 1/4 Turn Coin Box Faceplate 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch Specify key number when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 8 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 3, 2000 Illus. No. Part No. Qty. 1 2 3 4 5 6 7 8 124030 124025 824175 122301 131932 120730 151000 882903 1 1 1 1 3 1 6 1 9 10 11 12 13 14 15 850392 153010 152000 150207 150110 112563 124104 124105 2 3 2 4 1 1 1 American Dryer Corporation Description 15 Minute Timer - 24 VAC 60 Minute Timer - 24 VAC Red Pilot Light - 24 VAC “Tap Touch” Switch Relay SPST 24v 30-Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2” Phillips Pan Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer 88 Currant Road / Fall River, MA 02720-4781 9 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 Illus. No. Part No. Qty. 1 2 3 123005 122400 824015 1 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 -- 800051 131917 150207 154001 152000 153010 120730 150002 150110 150001 131931 151000 112050 150309 124103 124025 124030 122602 122700 122801 1 1 2 2 2 2 1 2 4 2 1 2 1 1 2 1 1 1 8 1 Telephone: (508) 678-9000 Description Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) Dual Timer Control Panel ONLY Push-To-Start Relay - 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 30-Position Terminal Block #6-32 x 1” Phillips Round Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw #6-32 x 1/2” Phillips Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label #10-16 x 1/2” Hex Head TEK Crimptite Screw Arrow Timer Knob 60-Minute Timer - 24 VAC 15-Minute Timer - 24 VAC 9-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool...Not Illustrated Fax: (508) 678-9447 10 Dual Timer Control Box Assembly Illus. No. 1 2 3 4 5 6 7 8** 9 10 11 12 * ** Part No. 122603 122701 122801 315010 150300 150300 141403 136008 136057 150301 150002 120715 151000 Qty. 1 8 1 1 2 2 1 * * * 2 1 2 Description 9-Pin Socket Connector Socket Terminal Pin/Socket Extraction Tool 9-Pin Connector Bracket #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Washer TEK Screw Transformer - 24 VAC Fuse Block/Strip 1/2-Amp (Slo-Blo) Fuse #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut As required. Check fuse rating for verification. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 11 Front Panel Assembly for Plastic Door Illus. No. Part No. Qty. 1 875302* 1 875313 1 154215 170330 150300 150309 121405 2 1 1 8 1 2 3 4 5 6 * Description Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1 through 3 and 6) Stainless Steel Right Hand Insulated Front Panel Assembly Complete (includes illus. nos. 1 through 3 and 6) 1/4” Pop Rivet Friction Door Latch #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Rubber Grommet Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 12 Illus. No. “Plastic” Main Door Assembly Part No. Qty. 1 881421 1 2 3 4 5 6 800448 150410 152014 102349 102212 170730 150448 170319 150431 4 4 1 1 1 1 4 4 1 7 8 9 American Dryer Corporation Description Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass with 4 Holes Main Door Glass Adhesive (10.3 oz. cartridge) 1/2” Stainless Steel Flat Head Allen Screw Door Glass (nylon) Spacer Main Door Latch Screw (#10 x 7/16” dome hex head) 88 Currant Road / Fall River, MA 02720-4781 Main Door Switch Housing for Plastic Door Illus. No. Part No. Qty. 1 2 3 4 5 6 152013 153008 137005 121028 154281 800448 2 2 1 2 2 1 7 8 9 10 153565 313218 150201 121405 2 1 2 1 Telephone: (508) 678-9000 13 Description #6-32 Hex Nut #6 Lock Washer Single-Pole Door Switch Insulated Female Terminal 3/8” Standard Nylon Spacer 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6-32 x 1” Self Clinching Stud Main Door Switch Housing #10-32 x 1/4” Phillips Pan Head Screw Rubber Grommet Fax: (508) 678-9447 14 Illus. No. Main Door “Cold Rolled Steel (CRS)” Assembly Part No. Qty. 1 881150 1 2 3 102354 170730 170731 881152 1 1 1 1 4 5 6 150445 153031 881151 2 1 1 7 150445 150443 150683 152014 151010 150120 150683 152014 881210 102218 102360 2 2 3 3 1 1 3 3 1 1 1 170731 1 151013 4 8 9 10 11 12 13 14 15 16 American Dryer Corporation Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4-20 x 3/4” Stainless Steel Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut Black Main Door Handle 20-7/16” Door Glass Glass/Door Gasket Tape (for models mfd. as of February 9, 2001) Black Glass Adhesive (10.3 oz. cartridge) (for models mfd. prior to February 9, 2001) #10-32 Black Nylon Acorn Nut 88 Currant Road / Fall River, MA 02720-4781 Main Door Switch Assembly Cold Rolled Steel (CRS) Door Illus. No. 1 2 3 4 5 6 7 Part No. 153566 152013 153010 137005 122636 881211 150301 Qty. 2 2 2 1 2 1 2 Telephone: (508) 678-9000 15 Description #6-32 x 7/8” Clinch Stud #6-32 Hex Nut #6 Star Washer Single-Pole Door Switch Flag Terminal Main Door Switch Housing #8-18 x 7/16” Phillips Pan Head TEK Screw Fax: (508) 678-9447 16 Cold Rolled Steel (CRS) Door Front Panel Illus. No. Part No. Qty. 1 881270* 1 881288 1 881996* 1 154215 170330 150300 150309 881152 881208 150445 150443 881151 881209 2 1 1 8 1 1 4 4 1 1 2 3 4 5 6 7 8 * Description Right Hand Front Panel Assembly (cold rolled steel [CRS] door) (includes illus. nos. 1 through 3) Stainless Steel Front Panel Assembly (cold rolled steel [CRS] door) (includes illus. nos. 1 through 3) Left Hand Front Panel Assembly (cold rolled steel [CRS] door) (includes illus. nos. 1 through 3) 1/4” Pop Rivet Friction Door Latch #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Phillips Hex Head TEK Crimptite Screw Black Top Hinge Block Assembly Stainless Steel Top Hinge Block Assembly 1/4-20 x 7/8” Black Cap Head Setscrew 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew Black Bottom Hinge Block Assembly Stainless Steel Bottom Hinge Assembly Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 Basket (Tumbler)/Support Assemblies Illus. No. 1* 2 3 4 5 6 7 8 9 10 11 -12 * Part No. Qty. 800708 800857 800816 1 1 1 800819 1 800873 1 800876 1 150413 150429 301308 301408 150500 100905 153004 800613 800615 152005 153005 153004 116000 401010 115986 40 1 4 4 1 4 4 1 1 4 4 4 1 1 1 17 Description Basket (tumbler) ONLY without Felt Collar Stainless Steel Basket (tumbler) ONLY without Felt Collar Non-Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Stainless Steel Non-Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) Stainless Steel Reversing Basket (tumbler) and Support Assembly Complete (includes illus. nos. 1 through 10) #10-16 x 1/2” TORX Head Crimptite Screw TORX Hand Driver (for removal of TORX head screw) Basket (tumbler) Rib ONLY Stainless Steel Basket (tumbler) Rib ONLY 5/16-18 x 3/4” Socket Button Head Screw 3/8-16 x 37” Tie Rod 3/8” Flat Washer Non-Reversing Basket (tumbler) Support ONLY Reversing Basket (tumbler) Support ONLY 3/8” Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar 1/4” x 2” Basket (tumbler) Pad Felt collar is not included and must be ordered separately. Telephone: (508) 678-9000 Fax: (508) 678-9447 18 Drop Lint Door Assembly Without Trim Illus. No. 1 2 3 4 5 6 7 8 * Part No. Qty. 800150 1 160200 160003 160104 160008 160009 150425 1 1 1 1 1 1 157000 802104* 1 1 882106 1 150201 117604 150419 150418 108120 6 7 2 1 1 Description Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Knob Latch ONLY with 2 Screws (without cam) Dummy Lock ONLY (for non-coin models) MK-100 Key ONLY (for dummy lock) Lock Cam for AD-100 and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Insulated Drop Lint Drawer Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Pan Head TEK Screw Neoprene Sponge Tape (sold by the foot) #6 x 1/2” Tamperproof TEK Screw Tamperproof Screw Hand Driver Chain for Drop Lint Door (10-1/2” length) Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 19 Drop Lint Door Assembly With Trim For ALL Coin Models Illus. No. 1 2 3 4 5 6 7 8 9 10 * Part No. Qty. 160001 160103 800150 1 1 1 160200 160003 160104 160008 160009 150425 1 1 1 1 1 1 157000 800237* 1 1 880229 1 150201 117604 117603 180212 150419 150418 108120 6 7 3 1 2 1 1 Description AD-100 Lock Assembly with Key (for coin models Only) AD-100 Key ONLY Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Knob Latch ONLY with 2 Screws (without cam) Dummy Lock ONLY (for non-coin models) MK-100 Key ONLY (for dummy lock) Lock Cam for AD-100 and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8” Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Insulated Drop Lint Drawer Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Pan Head TEK Screw Neoprene Sponge Tape (sold by the foot) Noise Suppressor Tape (sold by the foot) Mid Trim/Kick Plate - Gray (8-1/4” length) #6 x 1/2” Tamperproof TEK Screw Tamperproof Screw Hand Driver Chain for Drop Lint Door (10-1/2” length) Specify color when ordering. Telephone: (508) 678-9000 Fax: (508) 678-9447 20 Illus. No. 1 2 3 4 5 6 7 - Lint Trap Assembly Part No. Qty. 800472 1 800473 1 850187 850188 154200 304101 150300 800506 150419 108120 150418 1 1 7 1 2 1 2 1 1 American Dryer Corporation Description Non-Reversing Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) Reversing Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) Non-Reversing Lint Trap ONLY Reversing Lint Trap ONLY 5/32” Pop Rivet Lint Screen Holder #10-16 x 1/2” Hex Washer TEK Screw Lint Screen #6 x 1/2” Tamperproof TEK Screw Chain for Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver 88 Currant Road / Fall River, MA 02720-4781 Idler Bearing Assembly Illus. No. 1 Part No. Qty. 4 5 6 100165 100106 101140 100166 100167 100109 154301 100705 882576 1 1 1 1 1 1 2 1 1 7 8 9 10 11 12 150617 153005 153004 801009 152004 150509 2 2 2 1 1 1 2 3 Telephone: (508) 678-9000 21 Description 5L-610 V-Belt (idler to basket [tumbler]) for Non-Reversing Models ONLY 5L-690 V-Belt (idler to basket [tumbler]) for Reversing Models ONLY 14” x 3” Compound Pulley 4L-790 V-Belt (idler to motor) 60 Hz (for non-reversing models Only) 4L-800 V-Belt (idler to motor) 50 Hz (for non-reversing models Only) 4L-650 V-Belt (idler to motor) 50/60 Hz (for reversing models Only) 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt Fax: (508) 678-9447 22 Basket (Tumbler) Bearing Assembly American Dryer Corporation 88 Currant Road / Fall River, MA 02720-4781 23 Basket (Tumbler) Bearing Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Part No. Qty. 880220 153005 152005 882544 1 4 4 1 882545 1 882542 882543 880202 880779 150601 153004 153005 152005 154326 152004 150621 153002 150501 102120 401010 824807 100713 101100 100106 150610 1 1 1 1 2 8 2 2 2 4 2 4 4 1 1 1 1 1 1 2 Telephone: (508) 678-9000 Description 1-3/8” Flange Bearing 3/8” Lock Washer 3/8-16 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 14 and 20) Bearing Assembly Complete with Rotational Sensor (includes illus. nos. 4 through 16 and 20) Bearing Support ONLY Bearing Support ONLY (with rotational sensor) 1-3/8” Pillow Block Bearing ONLY 1-3/8” Pillow Block Bearing Assembly (with rotational sensor) 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-24 x 3/8” Setscrew (black) 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt 5/16” Lock Washer 5/16-18 x 3/4” Tap Bolt Sintered 8 Magnet #847 Construction Mastic Rotational Sensor Assembly 1/4” x 1/4” x 7/8” Key 18” Pulley 5L-690 V-Belt 5/16-18 x 1-1/2” Allen Setscrew Fax: (508) 678-9447 24 American Dryer Corporation Non-Reversing T.E.F.C. Motor Mount Assembly 88 Currant Road / Fall River, MA 02720-4781 Non-Reversing T.E.F.C. Motor Mount Assembly Illus. No. Part No. Qty. 1 2 3 100117 100701 101133 101130 150501 153002 153001 100069* 1 1 1 1 4 4 4 1 181016 1 122701 122801 137030 152004 153002 153001 117604 154000 850018 804019* 8 1 1 4 4 4 4 4 1 1 882492 ** 153051 100603 100714 153050 152006 120200 100007 1 1 1 2 2 1 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 * ** 25 Description 4L-620 V-Belt (motor to idler) 3/16” x 3/16” x 1” Key 5/8” x 2-1/4” Motor Pulley (for 60 Hz models Only) 5/8” x 2-1/2” Motor Pulley (for 50 Hz models Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 3/4 HP 120/208/230v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug (56Z frame) for 60 Hz Models ONLY 3/4 HP 230v 1ø (with 3/4” shaft) Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor with Plug (56Z frame) for 50 Hz Models ONLY Socket Terminal ONLY Pin/Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Neoprene Sponge Tape (sold by the foot) 5/16-18 Tinnerman Nut Non-Reversing Motor Mount ONLY (56Z frame) 3/4 HP 120/230v 1ø Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly with Plug Complete for 60 Hz Models ONLY (includes illus. nos. 2 through 7 and 13 through 20) 3/4 HP 230v 1ø Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete for 50 Hz Models ONLY (includes illus. nos. 2 through 6 and 13 through 22) 3/4” S.A.E. Flat Washer 16” Impellor with 3/4” Bore (for 50 Hz models Only) 3/16” x 3/16” x 1-7/8” Key 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut 3/8” x 90° Connector 1/2 HP 208/460v 50/60 Hz Motor (for 3-phase [3ø] models Only) Specify voltage when ordering. Contact factory for information. Telephone: (508) 678-9000 Fax: (508) 678-9447 26 American Dryer Corporation Reversing T.E.F.C. Motor Mount Assembly 88 Currant Road / Fall River, MA 02720-4781 27 Reversing T.E.F.C. Motor Mount Assembly Illus. No. 1 2 3 Part No. Qty. 4 5 100114 100701 101130 101139 120200 181003 1 1 1 1 1 1 6 7 8 9 150501 153002 153001 100007* 4 4 4 1 10 11 12 13 14 15 16 17 18 120200 150501 153002 153001 154000 152004 153002 153001 850021 804026** 1 4 4 4 8 7 7 7 1 1 19 20 21 22 23 24 -------- *** 117604 153051 100714 100604 153050 152006 4 1 1 1 **** 2 Description 4L-630 V-Belt (to idler assembly) 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (for 60 Hz models Only) 5/8” x 2-3/4” Motor Pulley (for 50 Hz models Only) 3/8” x 90° Connector 1/2 HP 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1/2 HP 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor (56Z frame) 3/8” x 90° Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16” Tinnerman Nut 5/16” Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount ONLY (56Z frame) 60 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) 50 Hz Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) Neoprene Sponge Tape (sold by the foot) 3/4” S.A.E. Flat Washer 3/16” x 3/16” x 1-7/8” Key 12-1/2” Impellor 1/2” S.A.E. Flat Washer 1/2-20 Left Hand Jam Nut * Check part number on motor data label to verify correct motor. ** Specify voltage when ordering. *** Contact factory for information. **** As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 28 American Dryer Corporation Sensor Bracket Assemblies 88 Currant Road / Fall River, MA 02720-4781 Sensor Bracket Assemblies Illus. No. Qty. 1 880251 1 2 3 4 5 6 130103 153010 152000 121028 122701 112801 122605 154007 150005 801425 1 2 2 2 4 1 1 2 2 1 11 12 13 14 15 16 17 18 19 20 21 22 23 24 305007 122604 122700 150301 150005 130111 130100 130301 130101 153010 152000 840065 121028 122701 122605 840062 1 1 4 2 * 1 1 1 1 * * 1 * * 1 1 25 801418 1 305007 122604 122700 122801 150301 1 7 8 9 10 26 27 28 * Part No. * 1 2 29 Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° F Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY Pin/Socket Extraction Tool 4-Pin Socket Connector ONLY 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Phillips Round Head Machine Screw 130° F Thermostat 150° F Thermostat 225° Manual Reset Thermostat 180° F Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper ONLY Insulated Terminal ONLY Socket Terminal ONLY 4-Pin Socket Connector ONLY Sensor Bracket Harness Assembly (includes illus. nos. 22 through 24) Non-Computer Sensor Bracket Assembly Complete (includes thermostats) (includes illus. nos. 14 through 25) Universal Sensor Bracket ONLY 4-Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw As required. Telephone: (508) 678-9000 Fax: (508) 678-9447 30 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. as of April 15, 2000 Illus. No. 1* 2 3 4 Part No. Qty. 882898 1 882899 1 814832 141105 141210 318714 1 4 1 1 American Dryer Corporation Description Natural Gas Burner Assembly Complete For Models Mfd. with Natural Gas ONLY (includes illus. nos. 1 through 31) Liquid Propane (L.P.) Gas Burner Assembly Complete For Models Mfd. with Liquid Propane (L.P.) Gas ONLY (includes illus. nos. 1 through 31) Burner Box ONLY Large Burner Tube 3/4” Direct Spark Ignition (DSI) Manifold (4-port) Bracket for Horizontal Facing Gas Valve 88 Currant Road / Fall River, MA 02720-4781 Direct Spark Ignition (DSI) Burner Assembly (continued) 31 For Models Mfd. as of April 15, 2000 Illus. No. 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ** * ** Part No. Qty. 128927 880960 1 1 882230* 140819* 140803* 150103 151001 150300 809309 150309 152013 128935 817027 142707 142506 142600 142809 319704 151000 150001 130201 318700 143000 154004 802799 122200 150303 105500 319202 154002 882772 1 4 4 4 4 5 1 9 2 1 1 4 1 1 1 1 2 2 1 1 1 1 1 1 2 1 1 1 1 Description 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC Direct Spark Ignition (DSI) Liquid Propane (L.P.) Gas Valve Assembly ADG-758 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Conversion Kit #30 Burner Orifice (natural gas) #49 Burner Orifice (liquid propane [L.P.] gas) #8-32 x 1/2” Pan Head Machine Screw #8-32 Pal Nut #10-16 x 1/2” Hex Washer TEK Screw Ignitor Probe Assembly with 19” Leads #10-16 x 1/2” Hex Head TEK Crimptite Screw #6-32 Hex Nut Direct Spark Ignition (DSI) Module with 3 Tries Johnson Controls Direct Spark Ignition (DSI) Module Mounting Bracket 1/2” x 1-1/2” Long Black Nipple 1/2” Street Elbow 1/2” Black Union 1/2” x 29-1/8” Nipple Hi-Limit Mounting Bracket #6-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330º Hi-Limit Manual Reset Pipe Bracket (bent) 3/4” to 1/2” Reducing Coupling Twin Speed Nut Sail Switch Box Cover and Bracket ONLY Sail Switch ONLY #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Steam to Gas Interface Plate...Not Illustrated Consult factory for elevations over 2,000 feet. Needed when converting from steam to gas heat. Telephone: (508) 678-9000 Fax: (508) 678-9447 32 Direct Spark Ignition (DSI) Burner Assembly For Models Mfd. prior to April 15, 2000 Illus. No. Part No. Qty. 1 882483* 1 882484* 1 814832 882230** 141105 141210 323737 1 1 4 1 1 2 3 4 American Dryer Corporation Description Natural Gas Burner Assembly Complete Less Orifices For Models Mfd. with Natural Gas ONLY (includes illus. nos. 1 through 5 and 7 through 32) Liquid Propane (L.P.) Gas Burner Assembly Complete Less Orifices For Models Mfd. with Liquid Propane (L.P.) Gas ONLY (includes illus. nos. 1 through 5 and 7 through 32) Burner Box ONLY ADG-758 Direct Spark Ignition (DSI) Liquid Propane (L.P.) Conversion Kit Large Burner Tube 4-Port Manifold Pipe Bracket 88 Currant Road / Fall River, MA 02720-4781 33 Direct Spark Ignition (DSI) Burner Assembly (continued) For Models Mfd. prior to April 15, 2000 Illus. No. Part No. Qty. 5 6 150300 140819** 140803** 150103 153000 151001 128927 880960 140411 318712 150309 881367 142809 810030 128935 809309 150309 319704 151001 150001 130201 318700 143000 154004 150309 802799 122200 881706 2 4 4 4 4 4 1 1 1 1 7 1 1 1 1 1 3 1 2 2 1 1 1 1 2 1 1 1 150303 105500 319202 154002 2 1 1 1 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 * ** Description #10-16 x 1/2” Hex Washer TEK Screw #30 Burner Orifice (natural gas) #49 Burner Orifice (liquid propane [L.P.] gas) #8-32 x 1/2” Phillips Round Head Machine Screw #8 Steel Burr #8-32 Pal Nut 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC Liquid Propane (L.P.) Gas Valve Assembly 24 VAC Gas Valve Liquid Propane (L.P.) Conversion Kit Pipe Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/2” Union Shutoff with Tail Piece 1/2” x 29-1/8” Nipple Direct Spark Ignition (DSI) Module Mounting Bracket Direct Spark Ignition (DSI) Module with 3 Tries Ignitor Assembly with High Voltage (HV) Wire #10-16 x 1/2” Hex Head TEK Crimptite Screw Hi-Limit Mounting Bracket #8-32 Pal Nut #6-32 x 1/2” Phillips Round Head Machine Screw 330º F Manual Reset Hi-Limit Pipe Bracket 3/4” to 1/2” Reducing Coupling Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Cover and Bracket Sail Switch ONLY Sail Switch Box Assembly Complete (includes illus. nos. 26 through 32) #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Burner orifices are not included and must be ordered separately. Consult factory for elevations over 2,000 feet. Telephone: (508) 678-9000 Fax: (508) 678-9447 34 Illus. No. Single-Phase (1Ø) Motor, Electric Relay Panel Assembly Part No. Qty. 1 2 3 132475 150299 824828 1 2 1 - 322809 150301 1 4 American Dryer Corporation Description 2-Pole Contactor - 24 VAC #10 x 1” Hex Washer TEK Screw RC Network with Connectors (for microprocessor controller [computer] models Only) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated 88 Currant Road / Fall River, MA 02720-4781 35 3-Phase (3Ø) Motor, Electric Relay Panel Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 ------- Part No. 322812 132430 137015 150103 151001 153002 152004 120701 150008 151000 121300 322809 150301 -------- Qty. 1 1 1 2 2 1 1 1 2 2 3 1 4 1 Telephone: (508) 678-9000 Description Back Electrical Box Component Plate Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC RC Network (for microprocessor controller [computer] models Only) #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated Transformer (refer to Step Down Transformer Usage Listing on page 40) Fax: (508) 678-9447 36 Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ------- Microprocessor Reversing Rear Control Box Assembly Part No. 322812 137060 137013 882386 150103 151001 153002 152004 132430 150103 151001 120701 150008 151000 121300 322809 150301 -------- Qty. 1 1 4 1 2 2 1 1 1 2 2 1 2 2 3 1 4 1 American Dryer Corporation Description Back Electrical Box Component Plate Arc Suppressor (A.S.) Board Nylon Standoff Reversing Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Round Head TEK Screw...Not Illustrated Transformer (refer to Step Down Transformer Usage Listing on page 40) 88 Currant Road / Fall River, MA 02720-4781 37 Dual Timer Reversing Rear Control Box Assembly Illus. No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ------- Part No. 322812 132198 150301 882386 150103 151001 153002 152004 132430 150103 151001 120701 150008 151000 121300 322809 150301 -------- Qty. 1 1 2 1 2 2 1 1 1 2 2 1 2 2 3 1 4 1 Telephone: (508) 678-9000 Description Back Electrical Box Component Plate Reversing Timer (50/60 Hz) 24 VAC #8-18 x 7/16” Phillips Pan Head TEK Screw Reversing Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16” Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60 Hz) 24 VAC #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated Transformer (refer to Step Down Transformer Usage Listing on page 40) Fax: (508) 678-9447 38 Illus. No. 1 2 3 4 5 6 7 8 9 Outer Top/Back Guard Assemblies Part No. 322809 150301 323738 150301 150301 312527 314514 150301 103500 Qty. 1 5 1 6 8 1 1 10 4 American Dryer Corporation Description Rear Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Outer Top Guard Lower Back Guard #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Leg 88 Currant Road / Fall River, MA 02720-4781 39 Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch (ADC Part No. 137056 Greenwald). Coin acceptors listed include optical switch (ADC Part No. 881143 Hanke). Single Coin* ADC Part No. Nation 882689 United States 125100 U.S. and Canada 125107 881768 881604 125103 125121 125133 Australia Australia Japan ----Hong Kong Description 25¢ Hanke Optic Coin Acceptor (for models mfd. as of July 26, 2000) 25¢ Greenwald Optic Coin Acceptor (for models mfd. prior to July 26, 2000) 20¢ Greenwald Australian Optic Coin Acceptor $1 Hanke Australian Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor 0.882 Greenwald Token Optic Coin Acceptor 0.800 Greenwald Token Optic Coin Acceptor $1 Hong Kong Optic Coin Acceptor Dual Coin* ADC Part No. Nation 881508 881842 881542 881846 881541 U.S. and Canada Canada United Kingdom France Netherlands Description 10¢/25¢ Hanke Dual Optic Coin Acceptor 25¢/$1 Hanke Dual Optic Coin Acceptor 1£/20 Pence Hanke Dual Optic Coin Acceptor 2/5 French Franc Hanke Dual Optic Coin Acceptor 25¢/1 Hanke Guilder Dual Optic Coin Acceptor * Consult factory for coin acceptors not listed. Telephone: (508) 678-9000 Fax: (508) 678-9447 40 Step Down Transformer Usage Listing STEP DOWN TRANSFORMER USAGE LISTING Heat GAS American Dryer Corporation Voltage Wire Service Transformer Part No. 380 3 132059 380 4 132059 416 3 132062 416 4 132062 460/480 3 132053 460/480 4 132053 575 3 132050 88 Currant Road / Fall River, MA 02720-4781 Additional Parts Available Part No. 112039 112280 112534 114001 114006 114095 117505 120100 120300 120400 120500 120600 120800 120802 120902 120903 121014 121499 121500 121503 122804 404500 404502 404506 404507 410001 880884 41 Description “Black/White/Green Ground” Label “ Clean Lint Screen” Label “Phase 5 OPL Program Location Summary” Label “CAUTION - Exhaust/Lint Screen” Label “WARNING - Fire Hazards” Label “MOP HEAD WARNING” Label Aluminum Duct Tape (sold by the foot) 3/8” Straight (BX) Connector 3/8” x 45° (BX) Connector 3/8” Red Jacket (BX) Insulator 3/8” Jiffy Clip (BX retainer clip) 3/8” Greenfield (BX) 1/4” In-Line Connector Red Butt Connector #74B Wire Nut Crimp-On Wire Nut 1/4” Insulated (female) Terminal 5-1/2” Harness Tie 8” Harness Tie Harness Tie Mounting Clip Manometer (hydro gauge) for Measuring Gas Pressure Almond Brush-In-Cap Bottle Touch-Up Paint White Brush-In-Cap Bottle Touch-Up Paint Beige Brush-In-Cap Bottle Touch-Up Paint Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint 1/2” Allen Wrench (for removal of shutoff valve tail piece) Basket (tumbler) Bearing Puller Telephone: (508) 678-9000 Fax: (508) 678-9447 ADC 450419 1 - 12/17/99-30 4 * 01/08/03-20 2 * 08/22/01-25 3 - 09/04/02-5