Download Atdec TELEHOOK Wall Multi

Technical Specifications
TELEHOOK
12-30 Multi
General Features
Maximum Load: 18kg (39lbs)
Display Compatibility: Telehook 12-30 Multi is compatible with most LCD and Plasma Flat Panel Displays between
12” (30cm) and 30” (76cm) that use the VESA international mounting standard.
VESA Display Mounting Plates: Telehook 12-30 Multi comes with two separate VESA compliant mounting plates. These
Plates accomodate the following mounting hole patterns: - 75mm x 75mm (3” x 3”),
100mm x 100mm (4” x 4”) & 200mm x 100mm (8” x 4”)
Product Configurations: Telehook 12-30 Multi is able to be assembled into three different configurations to suit a
wide range of applications. These include an Articulated Arm configuration, a Swing Arm
configuration and a Wall Mount configuration. (Each configuration is able to use either of
the two VESA Display Mounting Plates)
Cable Management: Each unit includes 3 Push-In Clips for cable management.
Colour: Silver
Fasteners: All fasteners included
Warranty: 5 year limited
Mounting Options
• The Wall Bracket can be installed either
horizontally or vertically depending on your
application
65mm (29/16”)
42mm
(15/8”)
Wall Bracket
• The Wall Bracket can be mounted to either;
- Timber Stud Wall
- Masonry Wall
152mm
(6”)
7mm
(1/4”)
• Coach Screws and Nylon Anchor Plugs are
included with the product
20mm
(13/16”)
133mm
(51/4”)
VESA Display Mounting Plates
200mm (8”)
100mm (4”)
100mm (4”)
75mm (3”)
100mm
(4”)
100mm
(4”)
75mm
(3”)
5mm
(3/16”)
6mm
(1/4”)
TM
Overall Dimensions
Articulated Arm
464mm (181/4”)
61mm
(23/8”)
172mm (63/4”)
231mm (91/8”)
360°
180°
180°
+/-60° Tilt
157mm
(63/16”)
Display Horizontal
Adjustment +/-8°
71mm
(213/16”)
28mm
(11/8”)
89mm
(31/2”)
Wall Mount
Swing Arm
295mm (115/8”)
Max 20°
200mm (8”)
180°
180°
44mm
(13/4”)
28mm
(11/8”)
89mm
(31/2”)
As TFT Manufacturers are constantly releasing new monitor models, Atdec does not accept responsibility if the VESA mounting does not comply with the international standards.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 01.08.06
c