Transcript
External Notebook CPU Cooling Fan - Installation Guide NBFAN Press the button on the right side of the Notebook Fan, in order to adjust the spacing of the fastening teeth so that they are properly aligned with the perimeter of your notebook’s vent. Insert the fastening teeth into the vent slots and release the aforementioned button. Tighten the dial until the Notebook Fan is securely fastened to the vent. Insert the USB connector provided by the Notebook Fan, to an available USB port on the notebook. Once the USB connection is made to a powered notebook, NBFAN will engage and begin cooling. Please note that this product offers two fan speeds. To increase fan speed, press the silver button located on the attached dongle. To switch back to aregular speed, click the button again. Installation is complete. Revised: 12 December 2005 (A)