Download Intel SC5400BASE computer case

Intel® Server Chassis SC5400 5U Kit TPS
6.2.8
Hot Swap Hard Disk Drive Bays
IPMB Header - IPMB
The following table defines the pin-out of the 4-pin IPMB Header.
Table 59. IPMB Header Pin-out
Pin
Signal Name
Description
1
SMB_IPMB_5V_DAT
Data
2
GND
GND
3
SMB_IPMB_5V_CLK
Clock
4
SMB_IPMB_5V_ADDR
IPMI interface address selection. Primary(Low) =
0xC0, Secondary(High) = 0xC2
6.2.9
Active Hot Swap Backplane (HSBP) Cables Explained
Expander backplanes ship with only one cable (IPMB). This cable should be utilized in the
following manner:
6.2.9.1
ƒ
ƒ
ƒ
IPMB Cable
Always Installed – white 4-pin IPMB connector on HSBP to white 4-pin IPMB connector
on motherboard
If using one HSBP (Primary), connect the cable to HSBP_A on the motherboard
If using two HSBPs (Primary & Secondary), connect the second cable to HSBP_B on the
motherboard
Revision: 1.0
71