Download Intel D845GEBV2

Technical Reference
2.10.2
D845GERG2 Form Factor
The Desktop Board D845GERG2 is designed to fit into either a microATX or an ATX-form-factor
chassis. Figure 20 illustrates the mechanical form factor for the Desktop Board D845GERG2.
Dimensions are given in inches [millimeters]. The outer dimensions are 9.60 inches by
8.20 inches [243.84 millimeters by 208.28 millimeters]. Location of the I/O connectors and
mounting holes are in compliance with the ATX specification (see Section 1.5).
✏
NOTE
When installing the Desktop Board in a microATX chassis, make sure that peripheral devices are
installed at least 1.5 inches above the main power connector, the diskette drive connector, and the
IDE connector, and the DIMM sockets.
.800
[20.32]
6.50
[165.10]
6.10
[154.94]
5.20
[132.08]
0.00
1.700
[42.5]
9.050
[229.87]
.550
[13.97]
0.00
2.600
[66.04]
8.800
[223.52]
OM15023
Figure 20. Desktop Board D845GERG2 Dimensions
75