Download Eminent EM4436 network switch
Transcript
4 | ENGLISH On MAX2, port 5~8 Blinking Off When the power to Powered Devices has reached the maximum power (The power of all the connected PoE ports is ≥55W). No power may be supplied if additional PDs are connected. When the power output to Powered Devices has exceeded the maximum power (The total power of all the connected PoE ports is ≥70W). The power of all the connected PoE ports is <55W, or no Powered Devices are connected to the corresponding port. 2.2 Rear panel Figure 1-2 shows the rear panel of the switch. Power : The power port is where you need to connect the power cord. 3.0 Rack-mount Installation The switch is rack-mountable and can be installed on an 19 inch equipment rack. To do this, first, please install the mounting brackets on the switch’s side panels(one on each side), secure them with the included screws, and then use the screws provided with the equipment rack to mount the switch on the 19 inch rack.