Download CnMemory i.onik BTH-002
Transcript
BEDIENUNGSANLEITUNG User Manual BEDIENUNGSANLEITUNG EINFÜHRUNG3 ÜBERSICHT4 DAS HEADSET AUFLADEN 6 EIN-/AUSSCHALTEN7 MIT EINEM HANDY VERBINDEN 8 MIT BLUETOOTH-SENDER VERBINDEN 10 MULTI-VERBINDUNGEN11 GERÄTE WIEDERVERBINDEN 12 DAS HEADSET AUFSETZEN 13 ANRUFE TÄTIGEN 14 MUSIK SPIELEN 16 STANDARDEINSTELLUNGEN & ZURÜCKSETZEN17 HINWEISTON17 LED-ANZEIGE18 FAQ19 WARTUNG UND PFLEGE 20 TECHNISCHE DATEN 21 2 EINFÜHRUNG Schön, dass Sie sich für das i.onik® BTH-002 entschieden haben. Wir wünschen Ihnen viel Freude bei der Nutzung dieses hochwertigen Bluetooth Headsets. Bitte lesen Sie diese Bedienungsanleitung aufmerksam durch, bevor Sie dieses Gerät verwenden. BLUETOOTH - DRAHTLOSE KOMMUNIKATIONSTECHNOLOGIE Bluetooth ist ein Standard für die nahe Radio-Kommunikationstechnologie, die von Sony Ericsson, IBM, Intel, Nokia und Toshiba konzipiert wurde. Mit der Bluetooth-Technologie erzielen wir die höchste Übertragungsrate zwischen Mobiltelefonen, Computern, Druckern, Minicomputern und anderen Geräten. Die maximale Reichweite eines Gerätes zweiter Klasse ist 10 Meter, während die maximale Reichweite eines Gerätes erster Klasse bis zu 100 Meter beträgt. ÜBER i.onik® BTH-002 Dieses hochwertige Bluetooth-Headset unterstützt die folgenden BluetoothProfile: HSPHeadset-Profil HFPFreihand-Profil A2DP Fortgeschrittenes Audio-Verteilerprofil AVRCPAudio/Video-Fernbedienungsprofil 3 ÜBERSICHT Hören Sie sich entspannt Musik an mit Ihrem drahtlosen i.onik® BTH-002 Headset mit den folgenden Eigenschaften: 1) Verbindung mit Bluetooth-Handys oder Minicomputern, welche HFP unterstützen. - Sie können mit dem Headset Anrufe entgegen nehmen, beenden und abweisen. - Sie können die letzte Verbindung erneut wählen. - Sie können mit der Stimmerkennung anrufen (wenn Ihr Handy eine Stimmerkennungsfunktion hat). - Sie können die Lautstärke anpassen. - Sie können das Mikrofon ausschalten. 2) Sie können das i.onik® Headset mit einem Musikgerät verwenden, das A2DP unterstützt. - drahtlos Musik hören, wenn Sie unterwegs sind. - die Lautstärke von Ihrem Headset aus regeln, ohne das Gerät anzufassen. - von Ihrem Headset aus die Musik spielen oder anhalten. - Lieder überspringen. 3) Mit dem i.onik® BTH-002 Headset können Sie einfach umschalten zwischen Musik hören und Anrufe beantworten, sodass Sie nie einen Anruf verpassen. 4) D as i.onik® BTH-002 Headset verbindet sich automatisch mit dem zuletzt gekoppelten Gerät. Obwohl das verbundene Gerät und das Headset dieselben Bluetooth-Profile unterstützen, können die Funktionen aufgrund der Spezifikationsunterschiede des gekoppelten Gerätes und was es unterstützt, unterschiedlich sein. 4 1 AUSZIEHBARES HEADSET 2 <TASTE: VORHERIGER SONG 3 >TASTE: NÄCHSTER SONG 4 LED-ANZEIGE 5 (MFB) MULTIFUNKTIONSSCHALTER 6 +TASTE: LAUTER 7 –TASTE: LEISER 8 LADESTATION 9 EINGEBAUTES MIKROFON 5 DAS HEADSET AUFLADEN Bevor Sie dieses i.onik® BTH-002 Headset erstmals verwenden, laden Sie es bitte für 3-4 Stunden vollständig auf. Das rote Licht leuchtet während des Ladens und schaltet sich aus, sobald das Gerät vollständig aufgeladen ist. Wenn die Batterie zur Neige geht: Sie hören alle 20 Sekunden 3 Warntöne, während gleichzeitig das rote Licht zweimal blinkt. Das bedeutet, dass Sie Ihr Headset aufladen müssen. Es gibt zwei Möglichkeiten, Ihr i.onik® BTH-002 Headset aufzuladen: Die Batterie mit einem Reiseladegerät aufladen: Schritt 1: Stecken Sie das Reiseladegerät in eine Steckdose. Schritt 2: Verbinden Sie das Reiseladegerät mit der Ladestation des Headsets. Wenn das rote Licht leuchtet, wird das Headset aufgeladen. Wenn das rote Licht nicht mehr leuchtet, ist das Headset aufgeladen und kann benutzt werden. Es dauert ungefähr 3-4 Stunden, bis das Headset vollständig aufgeladen ist. Die Batterie mit einem USB-Kabel aufladen: Schritt 1: Stecken Sie das USB-Ladekabel in einen USB-Anschluss an Ihrem PC/ Notebook. Schritt 2: Verbinden Sie das Ladekabel mit der Ladestation des Headsets. Wenn das rote Licht leuchtet, wird das Headset aufgeladen. Wenn das rote Licht nicht mehr leuchtet, ist das Headset aufgeladen und kann benutzt werden. Es dauert ungefähr 3-4 Stunden, bis das Headset vollständig aufgeladen ist. 6 Achtung: Bitte achten Sie darauf, den richtigen Reiseadapter zu verwenden, je nachdem in welchem Land Sie sich gerade befinden. Jegliche Schäden des Headsets aufgrund falscher Anwendung sind nicht durch die Garantie abgedeckt. EIN-/AUSSCHALTEN FUNKTION Operation LED-ANZEIGE HINWEISTON Einschalten Drücken Sie 3-5 Sek. auf die mfb-taste, bis das blaue ledlicht leuchtet Das blaue ledlicht leuchtet für eine Sekunde langer Ton Ausschalten Drücken Sie 3-5 Sek. die mfb-taste, bis das rote Licht erlischt Das rote Licht leuchtet für eine Sek. und schaltet sich dann aus langerTon Achtung: Um Strom zu sparen, schaltet sich das i.onik® BTH-002 Headset automatisch nach 5 Minuten ab, wenn es nicht innerhalb 5 Minuten, nachdem es eingeschaltet wurde, mit einem anderen Gerät gekoppelt wird. 7 VERBINDUNG MIT MOBILTELEFON FUNKTION BETRIEB LED-ANZEIGE HINWEISTON Den Verbindungsmodus aktivieren Stellen Sie sicher, dass das Headset ausgeschaltet Ist. Halten Sie die Mfb-Taste für 7-9 Sekunden, bis das rote und blaue Led-Licht abwechselnd blinken. Rotes und blaues Licht blinken abwechselnd und schnell Langer Ton Der Verbindungsmodus dauert 2 Minuten. Wenn das Headset sich nicht innerhalb von 2 Minuten mit einem Bluetooth-Gerät verbinden lässt, schaltet es sich automatisch in den Standby-Modus. Bitte stellen Sie sicher, dass Ihr Handy über eine Bluetooth-Funktion verfügt. Die speziellen Verbindungsverfahren können je nach Handy unterschiedlich sein. Bitte informieren Sie sich diesbezüglich in Ihrer Bedienungsanleitung des Handys. 8 1) Bitte halten Sie das Headset und das Handy auf eine Entfernung von etwa 1 Meter, während Sie die Geräte verbinden. 2 ) Bitte schalten Sie das Gerät, das Sie verbinden möchten, in den gewünschten Verbindungsmodus, sodass es nach Bluetooth-Geräten suchen kann (Informieren Sie sich bitte in der Bedienungsanleitung Ihres Gerätes darüber, wie Sie den Verbindungsmodus aktivieren können). 3) Starten Sie die Bluetooth-Funktion Ihres Mobiltelefons und suchen Sie nach Bluetooth-Geräten. Nachdem die Suche beendet ist, sehen Sie den Eintrag „i.onik BTH-002“. Bitte wählen Sie den „i.onik BTH-002“-Eintrag in der Bluetooth-Geräteliste aus. 4) Je nach Angabe geben Sie bitte das Passwort oder die PIN-Nummer „0000“ ein. Dann drücken Sie die Taste „Ja“ oder „Bestätigen“. 5) Nachdem das i.onik® BTH-002 Headset erfolgreich verbunden wurde, wählen Sie „i.onik BTH-002“ in der Bluetooth-Geräteliste aus und drücken „Verbinden“. 6) Nachdem das Headset erfolgreich mit Ihrem ausgewählten Gerät verbunden wurde, blinkt das blaue LED-Licht schnell zwei oder drei Mal alle 4 Sekunden. Achtung: - Wenn die Verbindung nicht erfolgreich war, schalten Sie das Headset aus und wiederholen die Schritte 1-6 von oben, um eine erneute Verbindung zu versuchen. - Wenn die Verbindung erfolgreich war, erinnern sich die verbundenen Geräte aneinander, es sei denn, die Verbindungsinformationen werden gelöscht. Das Headset kann sich bis zu 8 Geräte merken. Wenn das Headset sich 8 Geräte gemerkt hat, wird das erste Gerät durch das zuletzt hinzu gefügte Gerät ersetzt. - Wenn Sie das Headset mit anderen Geräten verbinden möchten, verbinden Sie das neue Gerät bitte gemäß den oben genannten Schritten 1-6. 9 VERBINDUNG – BLUETOOTH-SENDER Sie können drahtlos Musik anhören, indem Sie das i.onik® BTH-002 Headset mit einem Stereo-Bluetooth-Sender verbinden, d. h. bspw. mit dem BTT001, der ein allgemeiner Bluetooth-Sender ist. Die Verbindungsschritte sind wie folgt: Das Headset kann sich mit maximal zwei Geräten gleichzeitig verbinden. Eins davon kann ein Mobiltelefon mit dem HFP-Profil sein; das zweite Gerät muss ein Gerät mit einem A2DP-Profil sein. Wenn Sie Ihr Gerät mit mehreren Bluetooth-Geräten verbinden möchten, gehen Sie bitte wie folgt vor: Bitte legen Sie den Bluetooth-Sender und das Headset etwa 1 Meter entfernt voneinander, während Sie die Geräte verbinden. Als erstes verbinden Sie das Headset mit dem Bluetooth-Sender (siehe „Headset mit einem Bluetooth-Sender verbinden“). Bitte aktivieren Sie den Verbindungsmodus im Headset (siehe „Wie man den Verbindungsmodus aktiviert“). Schalten Sie den Bluetooth-Sender aus. Schalten Sie den Bluetooth-Sender ein. Er sucht automatisch nach Bluetooth-Geräten und startet die Verbindung. Das Headset benötigt die PIN-Nummer. Der Bluetooth-Sender reagiert automatisch auf den Standard-PIN „0000“. Nachdem die Verbindung des Headsets erfolgreich war, blinkt das blaue LED-Licht zweimal schnell alle 4 Sekunden. Achtung: Das Verbindungspasswort von i.onik® BTH-002 ist „0000“, weshalb der Bluetooth-Sender ebenfalls den Standard-PIN „0000“ haben muss, damit er erfolgreich verbunden werden kann. 10 MULTI-VERBINDUNGEN Wenn die Verbindung nach mehreren Versuchen immer noch nicht erfolgreich war, sehen Sie bitte in der Bedienungsanleitung Ihres Bluetooth-Senders nach. Jetzt verbinden Sie das Headset mit dem Bluetooth-Handy (siehe „Headset mit einem Bluetooth-Handy verbinden“). Jetzt schalten Sie bitte den Bluetooth-Sender wieder ein. Er sollte sich automatisch mit dem Headset verbinden. Achtung: Nachdem das Headset erfolgreich mit mehreren Bluetooth-Geräten verbunden wurde, erinnern sich die verbundenen Geräte aneinander, es sei denn, die Verbindungsinformationen wurden aufgrund eines neuen verbundenen Gerätes gelöscht. Wenn das passiert, werden das Handy und das Headset als Freihand-Geräte eingestellt. Sollte das der Fall sein, starten Sie den Bluetooth-Sender bitte neu, damit die Verbindung zu mehreren Geräten wieder erfolgen kann. Wenn ein Handy verwendet wird, das sowohl HSP und A2DP gleichzeitig unterstützt, kann eine gleichzeitige Verbindung mit HSP und A2DP hergestellt werden. Wenn das der Fall ist, kann es sein, dass Sie sich nicht mehr gleichzeitig mit einem Bluetooth-Sender und einem Handy verbinden können. 11 GERÄTE WIEDERVERBINDEN Automatische Verbindung Jedes Mal, wenn das Headset eingeschaltet ist, versucht es automatisch, sich mit dem zuletzt verbundenen Gerät zu verbinden. DAS HEADSET AUFSETZEN Das Headset ist in der Größe verstellbar; bitte passen Sie das Headset gemäß Ihren Wünschen an. Das „L“ am Headset steht für das linke Ohr, das „R“ für das rechte Ohr. Bitte tragen Sie das Headset gemäß diesen Angaben. Manuelle Verbindung zum zuletzt verbundenen HFP-Gerät Wenn das Headset im Standby-Modus ist und sich nicht automatisch mit einem HFP-Gerät verbindet, drücken Sie bitte zweimal die MFB-Taste und es verbindet sich automatisch mit dem zuletzt verbundenen HFP-Gerät. Manuelle Verbindung zum zuletzt verbundenen A2DP-Gerät Wenn das Headset im Standby-Modus ist und sich nicht automatisch mit einem A2DP-Gerät verbindet, drücken Sie bitte kurz die Taste > (nächster Song) und es verbindet sich automatisch mit dem zuletzt verbundenen A2DP-Gerät. Achtung: Bevor Sie sich mit einem Bluetooth-Gerät verbinden, schalten Sie zuerst die BluetoothFunktion ein. Bei einigen Geräten wie z. B. Nokia Mobiltelefonen, müssen Sie die automatische Verbindung in den Telefoneinstellungen aktivieren. Weitere Informationen erhalten Sie in der Bedienungsanleitung Ihres Mobiltelefons. 12 13 ANRUFE TÄTIGEN FUNKTION STATUS HEADSET BETRIEB Stimmerkennung Standbymodus Taste < (nächster Song) 2 Sek. halten bis zum Ton. Wahlwiederholung Standbymodus Zweimal schnell die mfbTaste drücken. Lauter LAUTER Gesprächsmodus GESPRÄCHSMODUS Leiser Gesprächsmodus LEISER GESPRÄCHSMODUS Anruf annehmen Klingeln ANRUF ANNEHMEN KLINGELN Anruf abweisen Klingeln ANRUF ABWEISEN KLINGELN Anruf beenden ANRUF BEENDEN 14 Gesprächsmodus GESPRÄCHSMODUS Drücken sie die + Taste bis zur DRÜCKEN SIE DIE +TASTE BIS ZUR gewünschten Lautstärke. GEWÜNSCHTEN LAUTSTÄRKE. Drücken sie die + Taste bis zur DRÜCKEN SIE DIE +TASTE BIS ZUR gewünschten Lautstärke. GEWÜNSCHTEN LAUTSTÄRKE. Kurz die mfb-Taste drücken. KURZ DIE MFB-TASTE DRÜCKEN. Die mfb-Taste für 2 Sek. halten. FÜR DIE MFB-TASTE 2 SEKUNDEN HALTEN. Die mfb-taste drücken. DIE MFB-TASTE DRÜCKEN. Anrufweiterleitung Gesprächsmodus Drücken und halten Sie die mfb-taste 2 Sekunden bis zum Ton Mikrofon-Stummschaltung Gesprächsmodus Drücken Sie zweimal die mfb-taste Stummschaltung abbrechen Gesprächsmodus (stumm) Drücken sie zweimal die mfb-taste Warnung: Übermäßige Lautstärke oder Druck der Kopfhörer kann zu Gehörschäden führen. Achtung: Nicht alle Mobiltelefone unterstützen die oben gelisteten Funktionen. Bitte informieren Sie sich in der Bedienungsanleitung Ihres Mobiltelefons über die unterstützten Funktionen. Einige Funktionen und Hinweistöne können je nach Mobiltelefon unterschiedlich sein. Wenn das Volumen maximal oder minimal eingestellt wurde, hören Sie einen Hinweiston. Wenn Sie bei einigen Mobiltelefonen die Taste drücken, um einen eingehenden Anruf anzunehmen, wird das Gespräch auf das Mobiltelefon geschickt. Dann können Sie den Anruf auf das Headset umschalten, indem Sie auf die Gesprächsumschalttaste drücken oder indem Sie die Einstellungen im Mobiltelefon ändern. Weitere Informationen erhalten Sie in der Bedienungsanleitung Ihres Mobiltelefons. 15 MUSIK SPIELEN Wenn das Headset mit Ihrem Mobiltelefon oder Bluetooth-Sender, der A2DP unterstützt, verbunden ist, können Sie mit dem Headset drahtlos Musik hören. FUNKTION STATUS HEADSET Betrieb Lauter Musik spielen Drücken Sie die + Taste bis zur gewünschten Lautstärke Leiser Musik spielen Drücken Sie die - Taste bis zur gewünschten Lautstärke Pause Musik spielen Drücken Sie kurz die mfb-taste Spielen Pause Drücken Sie kurz die mfb-taste Letzter Song Musik spielen Drücken Sie die Taste < Nächster Song Musik spielen Drücken Sie die Taste > Wenn Musik gespielt wird, übertragen einige Geräte den Ton auf die Lautsprecher des Mobiltelefons. In diesem Fall müssen Sie die Geräteeinstellung folgendermaßen einstellen: „den Ton durch das Bluetooth-Gerät übertragen“ in den Einstellungen der Musikspieleroberfläche. Sie müssen 16 möglicherweise den Eintrag „BTH002“ in der Geräteliste auswählen, damit die Musik auf das Headset übertragen wird. Weitere Informationen erhalten Sie in der Geräteanleitung. Wenn das Volumen des Headsets auf maximal oder minimal eingestellt ist, hören Sie einen Hinweiston. Um die Funktionen des Headsets wie z. B. überspringen/Pause und Play zu verwenden, muss Ihr Mobiltelefon oder Bluetooth-Sender AVRCP unterstützen. Weitere Informationen erhalten Sie in der Geräteanleitung. STANDARDEINSTELLUNGEN & ZURÜCKSETZEN Bitte stellen Sie sicher, dass das Headset ausgeschaltet ist, drücken und halten Sie die Tasten MFB und + gleichzeitig für etwa 8 Sekunden, bis Sie zwei „DU“-Töne hören und das rote LED-Licht leuchtet. Das Headset ist jetzt auf die Werkseinstellungen zurückgesetzt und die vorherigen Verbindungsinformationen wurden entfernt. Bitte laden Sie das Headset wieder auf, um die Zurücksetzung abzuschließen. HINWEISTON HINWEISTON STATUS HEADSET Ton alle 3 Sekunden Gesprächsmodus und Mikrofonstummschaltung 3 „Du“-Töne alle 20 Sekunden Wenig Batterie VERBINDEN AUFLADEN LED-ANZEIGE 18 LED STATUS HEADSET Rotes Licht ist an Aufladen Rotes Licht ist aus Aufladen beendet LED indicator STATUS HEADSET Rotes & blaues led-licht blinken abwechselnd Verbindungsmodus Blaues led-licht 1 blinkt alle 2 Sekunden Nicht mit einem Gerät verbunden Blaues led-licht 2 blinkt schnell alle 4 Sekunden Stellen Sie eine hfp- oder a2dp-Verbindung her Blaues led-licht 3 blinkt schnell alle 2 Sekunden Stellen Sie eine hfp- und a2dp-Verbindung her Blaues led-licht schaltet sich nacheinander aus und ein Gesprächsmodus Rotes led-licht blinkt alle 20 Sekunden zweimal Wenig Batterie FAQ • Warum blinkt das rote Licht alle 20 Sekunden zweimal? - Wenig Batterie. Bitte laden Sie das Gerät auf. • Warum leuchtet das rote Licht beim Laden nicht? - Bitte überprüfen Sie, ob das Kabel richtig eingesteckt ist. - Wenn das Headset für längere Zeit nicht verwendet wurde, müssen Sie das Headset für 30 Minuten laden, bevor die Kontrollleuchte leuchtet. • Was ist die effektive Reichweite zwischen Mobiltelefon und Headset? - Gemäß Bluetooth-Standard ist die maximal kontrollierbare Reichweite eines Headsets der Klasse 2 10 Meter. Das kann jedoch nach Umgebungsbedingungen variieren. • Warum findet mein Telefon das Headset nicht? - Das Mobiltelefon findet das Headset nicht, wenn beide Geräte nicht im Verbindungsmodus sind. Bitte überprüfen Sie, dass das Headset im Verbindungsmodus ist und innerhalb der effektiven Reichweite und versuchen Sie erneut, die Geräte zu verbinden. • Warum höre ich keinen Ton auf dem Headset? - Überprüfen Sie, ob das Headset eingeschaltet ist. - Überprüfen Sie, dass die Lautstärke nicht zu leise oder stumm ist. - Überprüfen Sie, ob das Headset richtig mit dem Mobiltelefon verbunden ist. - Überprüfen Sie, ob die Distanz zwischen dem Headset und dem Mobiltelefon in der normal funktionierenden Reichweite ist. 19 • Warum hört sich die Stimme nicht klar in Telefongesprächen an? - Überprüfen Sie, dass das Mobiltelefon einen guten Empfang hat. - Überprüfen Sie, dass das Headset in der Reichweite des Gerätes ist. • Warum kann ich die Funktionen Pause, Play, vorheriger Song und nächster Song nicht kontrollieren, wenn ich Musik spiele? - Für diese Funktionen muss Ihr Bluetooth-Gerät AVRCP (Audio/VideoFernbedienungsprofil) unterstützen. PFLEGE UND WARTUNG Bitte lesen Sie die folgenden Anweisungen sorgfältig durch, um Ihr Produkt zu erhalten. 20 Bitte halten Sie das Gerät trocken und von feuchten Plätzen entfernt. Lassen Sie das Gerät nicht in der direkten Sonne oder an heißen Orten. Hohe Temperaturen verkürzen das Leben des elektronischen Gerätes und verursachen physische Schäden. Bitte lassen Sie das Gerät nicht an kalten Orten, da dies zu elektronischer Fehlfunktion führen kann. Bitte nehmen Sie das Gerät nicht auseinander, da dies zu Schäden führen und die Garantieansprüche verloren gehen.. Bitte gehen Sie vorsichtig mit dem Gerät um und vermeiden Sie Schläge und Stöße, da dies zu Schäden führen kann. Bitte benutzen Sie ein trockenes Tuch, um das Gerät zu reinigen und vermeiden Sie schädigende Reinigungsmittel. Bitte nutzen Sie zur Reinigung keine scharfkantigen Gegenstände oder aggressiven Reiniger, da dies Ihr Gerät beschädigen könnte. TECHNISCHE DATEN Bluetooth-Version: Bluetooth-Profile: AVRCP Effektive Reichweite: Betriebsdauer: Standby-Zeit: Versorgung: Ladezeit: Maße: Gewicht: Bluetooth V2.1 + EDR Headset, Freihand, A2DP, 10 Meter Musik: bis zu 7 Stunden Gespräche: bis zu 6 Stunden Bis zu 250 Stunden Strom: 5V/130mA Etwa 3 Stunden 162 x 153,5 x 32 mm Etwa 103 g Achtung: Dieses Gerät richtet sich nach Teil 15 der FCC-Regeln. Der Betrieb unterliegt den folgenden Bedingungen: (1) Dieses Gerät darf keine schädlichen Störungen verursachen und (2) dieses Gerät muss alle empfangenen Störungen annehmen, einschließlich Störungen, die zu ungewünschten Auswirkungen führen können. Änderungen oder Modifikationen, die nicht ausdrücklich genehmigt wurden, können das Recht des Nutzers, dieses Gerät zu verwenden, verletzen. Warnung: Die Batterie ist wiederverwendbar. Werfen Sie die Batterie nicht ins Feuer, da es Sie verletzen und zu einer Explosion führen könnte. 21 GARANTIE-INFORMATIONEN Ein Jahr limitierte Hardware-Garantie. Dieses Produkt hat eine Garantie von zwei Jahren für Material- und Verarbeitungsschäden. Die Batterie ist davon ausgeschlossen und hat eine Garantie von sechs Monaten. Bei allen Garantiefällen kontaktieren Sie bitte den Händler. 22 GARANTIEBESCHRÄNKUNG Die oben genannte Garantie trifft nicht auf Schäden zu, die sich folgendermaßen ergeben: falsche Anwendung; unermächtigte Modifizierung; Öffnen aus irgendeinem Grund; Betrieb oder Lagerung außerhalb der angegebenen Spezifikationen für das Produkt; In-Transit-Schäden; unsachgemäße Wartung; physische Beschädigung des Gerätes oder Schäden, die sich aus der Benutzung von Software, Zubehör, Medien, Betriebsstoffen, Kleinteilen oder solchen Gegenständen, die nicht für die Verwendung des Produkts geeignet sind, ergeben. Es gibt hinsichtlich dieses Produktes keine weiteren schriftlichen oder mündlichen Garantieerklärungen. Jegliche stillschweigende Zusicherung allgemeiner Gebrauchstauglichkeit oder Eignung für einen bestimmten Zweck ist auf die Dauer von 24 Monaten dieser schriftlichen Garantie beschränkt. Manche Staaten, Provinzen oder Länder erlauben keine Einschränkungen auf die Dauer der stillschweigenden Garantie, d. h. dass die oben genannte Einschränkung oder Befreiung möglicherweise nicht auf Sie zutrifft. Diese Garantie gibt Ihnen bestimmte Rechte und Sie haben je nach Staat, Provinz oder Land möglicherweise zusätzliche Rechte. Alle Informationen unterliegen der Änderung ohne Vorankündigung. COPYRIGHT Alle Rechte vorbehalten. Kein Teil dieses Handbuchs darf kopiert werden, in einem Retrieval-System gespeichert oder in jeglicher Form oder durch jegliche Medien übertragen werden, sei es elektronisch, mechanisch, durch Kopie, Aufnahme oder anderweitig, ohne die vorherige ausdrückliche Genehmigung des Inhabers des Urheberrechtes. Gemäß den Urheberrechten dürfen keine aufgenommenen Daten für andere Zwecke als den persönlichen Gebrauch verwendet werden, ohne die vorherige Zustimmung des Inhabers des Urheberrechtes. SUPPORT Für Support Ihres i.onik® Produktes rufen Sie die i.onik® Supporthotline unter +49 (0) 7664 - 4036912 an. Diese Supporthotline ist Montag bis Freitag von 9.30 Uhr bis 17:30 Uhr erreichbar. Supportfragen können auch an [email protected] gemailt werden. Bitte geben Sie genaue Informationen über das Problem an. Alle Informationen unterliegen der Änderung ohne Vorankündigung. 23 User‘s Guide Brief introduction 25 Overview27 Charging the headset 28 Switching on/off the headset 29 Pairing the headset with Bluetooth devices 30 Pairing the headset with Bluetooth mobile phone 31 Pairing the headset with Bluetooth transmitter 32 Multi-pair33 Reconnecting to a Bluetooth device 34 Wearing the headset 35 Making calls with the headset 36 Playing music 38 Restoring factory defaults and resetting 39 LED indicator 39 Indication tone 40 Care and maintenance 41 FAQs42 Specifications43 24 Brief introduction Welcome to use this Bluetooth stereo headset, BTH-002. Please read this user’s manual carefully before using it. 1. Bluetooth wireless communication technology Bluetooth is a standard of close range radio-communication technology that was drawn up by Sony Ericsson, IBM, Intel, Nokia and Toshiba. With Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices. The max transmission range of class II is 10 meters while the max transmission range of class I can reach up to 100 meters. 2. About i.onik® BTH-002 BTH-002 is a stereo Bluetooth headset. It supports the following Bluetooth profiles: HSP Headset Profile HFP Hands-Free Profile A2DP Advanced Audio Distribution Profile AVRCP Audio/Video Remote Control Profile 25 You can enjoy music wirelessly by using the i.onik® BTH-002. Steps as following: 1) Pairing with the Bluetooth mobile phone and PDA which support HFP. - Answer, end and reject call from the headset - Redial last number - Voice dial - Adjust the volume - Switch the conversation between the headset and the mobile phone - Microphone mute Overview 2) P airing with Bluetooth music devices and Bluetooth transmitter which support A2DP - Enjoy music wirelessly - Adjust the volume - Remote control the function of pause/play - Remote control last/next song 3) E asy to switch between conversation and music, you will not miss the incoming call during listening to music. 4) Automatic connecting with the last paired device when turn on the headset. Note: Even though the paired device and headset support the same Bluetooth profiles, the functions may be different due to the specification difference of the paired devices. 26 1 Retractable Headset 2 < Key: Previous song 3 > Key: Next song 4 LED indicator 5 (MFB) Multifunction Button 6 + Key: Volume up 7 - Key: Volume down 8 Charging port 9 built-in microphone 27 charging the headset First time charging Before you use this Bluetooth headset, please charge the battery of i.onik® BTH-002 fully. Next time When you hear three warning tones of “DONG” every 20 seconds, at the same time, the red light blinks two times. It means the battery is low power and need to be charged. There are two types of charging as below: A. Charging the battery with travel charger Step 1: Plug the travel charger into standard AC power outlet. Step 2: Connect the travel charger with the charging port of the headset. When the red light is on, the headset is charging. When the red light is off, the headset is charged fully. It takes about 3-4 hours to charge the headset fully. B. Charging the battery with USB cable Step 1: Insert USB charging cable into USB port of PC. Step 2: Connect charging cable with the charging port of headset. When the red light is on, the headset is charging. When the red light is off, the headset is charged fully. It takes about 3-4 hours to charge the headset fully. Warning: 1) The battery is recycled. 2) Do not dispose of the battery in fire, as it may cause explosion. Switch on/off headset FUNCTION Operation LED-Indicator Indication Switch on Press the MFB button for 3-5 seconds, and release it till the blue LED is on Blue LED is on for 1 second A long “DI” tone Switch off Press the MFB button for 3-5 seconds, and release it till the red LED is on Red LED is on for 1 second A long “DI” tone Tone Note: In order to save power, the headset will automatically switch off if no devices can be connected within 5 minutes after switching on. Note: Choosing travel charger or USB cable depends on different countries or areas and actual demands. 28 29 How to enter pairing mode Pairing the headset with Bluetooth devices FUNCTION Operation LED-Indicator Indication Enter pairing mode Make sure the headset is off. Press and hold MFB button for 7-9 seconds, and release it till the red and blue LEDS blink alternately. Red and blue LEDs blink alternately. Two “DU” tones Tone Note: The pairing mode will last 2 minutes. If the headset still can’t pair with any Bluetooth devices after 2 minutes, it will switch into standby mode automatically. Pairing the headset with Bluetooth mobile phone Please make sure your mobile phone has Bluetooth function that can be used. Specific pairing procedures may vary with different mobile phone. Please refer to your mobile phone manual for further information. Steps as follows: 1) Please keep the headset and mobile phone in the range of 1 meter when pairing. 2) Make the headset enter into pairing mode (Please refer to “how to enter into pairing mode”). 3) Start the Bluetooth function of mobile phone and search the Bluetooth devices. After searched, select “i.onik BTH-002” in the Bluetooth device list. 4) According to indication, enter password or PIN No: ”0000”, and press the key of ”Yes” or “confirmed”. 5) After successful pairing, select “i.onik BTH-002” in the Bluetooth device list, and press “connect”. 6) After successful connecting, the blue LED of the headset quickly blinks twice or three times every 4 seconds. Notes: - If the pairing is not successful, please switch off headset firstly, and then re-pair according to the steps 1-6 mentioned above. - After pairing is successful, paired devices will remember each other. Unless pairing information is deleted because of new pairing, no need to pair when use next time. The headset can remember 8 paired devices, when paired devices exceed 8 paired devices, the first one will be replaced. - If you want to pair the headset with other devices, please pair it with the new device according to steps 1-6 mentioned above. 30 31 Pairing the headset with Bluetooth transmitter You can enjoy music wirelessly through connecting headset with stereo Bluetooth transmitter. Here take BTT001 (single sale) iPod general Bluetooth transmitter for example. Pairing steps as follows: 1) Keep the Bluetooth transmitter and headset in the range of 1 meter when pairing. 2) Make the headset enter into pairing mode (refer to “How to enter into pairing mode“). 3) Turn on the Bluetooth transmitter. It will search Bluetooth device automatically and starts pairing. 4) When the headset requests PIN No, the Bluetooth transmitter needs to respond “0000” automatically. 5) After successful pairing and connecting, the blue LED of headset quickly blinks twice every 4 seconds. Notes: 1) The pairing password of i.onik® BTH-002 is “0000”, so, the headset can’t pair with the Bluetooth transmitter which pairing password is not “0000”. 2) If the pairing is still not successful after trying several times, please refer to your Bluetooth transmitter manual carefully. 32 Multi-pair The headset can connect with two devices at most. One is the mobile phone with HFP profile, another is the devices with A2DP profiles. If you want to finish the pairing of several Bluetooth devices, please refer to the following steps: 1) Firstly, pair the headset with Bluetooth transmitter (refer to “pairing headset with Bluetooth transmitter“). 2) Switch off the Bluetooth transmitter. 3) Pair and connect the headset with the Bluetooth mobile phone (refer to “pairing headset with Bluetooth mobile phone”). 4) Restart Bluetooth transmitter, it will connect with headset automatically. Notes: - After successful pairing with several Bluetooth devices, the paired devices will remember each other. Unless pairing information is deleted because of new pairing, otherwise make mobile phone and headset set up hands free connection next time, and re-start the Bluetooth transmitter, then the connection of several devices can be performed. - For the mobile phone which supports the HSP and A2DP at the same time. It may set up connection with HSP and A2DP simultaneously. At this time, start Bluetooth transmitter may not connect with the headset again. 33 Reconnecting to a Bluetooth device 1) Automatic connecting Every time the headset is switched on, it will connect to last connected device automatically. Wearing the headset The string of this headset is retractable, please adjust according to the actual use. Logo “L” of headset represents left ear, Logo “R” of headset represents right ear. Please wear the headset according to the indication of the logo. 2) Manual connecting to last connected HFP device When the headset is in standby mode and doesn’t connect to any HFP devices, short press MFB button twice, it will connect to last connected HFP device automatically. 3) Manual connecting to last connected A2DP device When the headset is in standby mode and doesn’t connect to any A2DP devices, short press > (next song) button, it will connect to last connected A2DP device automatically. Notes: - Before connecting to a Bluetooth device, please turn on the Bluetoth device’s Bluetooth function. - On some Bluetooth devices, take some Nokia mobile phones for example, you have to allow automatic connecting in the mobile phone’s settings. Please refer to your mobile phone’s manual for further information. 34 35 Making calls with the headset 36 FUNCTION STATUS HEADSET Operation Voice dial Standby mode Press and hold > (next song) button for 2s, release it till hearing indication sound Redial last number Standby mode Short press MFB twice quickly Volume up Conversation mode Short press or long press + key Volume down Conversation mode Short press or long press - key Answer calling Ringing Short press MFB Reject calling Ringing Press and hold MFB for 2s, and release it till hearing indication sound End calling Conversation mode Short press MFB Call transfer Conversation mode Press and hold MFB for 2s, and release it till hearing indication tone Microphone mute Conversation mode Quickly press the MFB twice Cancel mute Conversation mode (mute) Quickly press the MFB twice Warning: Excessive pressure from headphones can cause hearing loss. Notes: - Not all the mobile phones support all the functions listed above. Please refer to the instruction of your mobile phone. - Some functions and indication tones may vary with different mobile phones. - When the volume is adjusted to max or min, you will hear a indication tone. - For some mobile phones, when you press the key of accepting on the phone, the conversation will be sent to the mobile phone. At this time, you can switch the call to headset by using the conversation switch button or through operating on the mobile phone. Please refer to the instruction of your mobile phone for further information. 37 Restoring to factory defaults and resetting Playing music Make sure the headset is off, press and hold MFB and + buttons simultaneously for about 8 seconds, release them when you hear two “DU” tones and see red LED is on, now the headset restores to factory defaults, and the pairing information will be deleted. Charge the headset to make it reset. When the headset connects with the mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music through headset wirelessly. Playing music Operation Short or long press + key Volume down Playing music Short or long press - key Pause Playing music Short press MFB Play Pausing Short press MFB Last song Playing music Short press < key Next song Playing music Short press> key Notes: - For some mobile phones, when they are playing music, the music will transmit to the speaker of mobile phone, you have to choose “transmit the sound through Bluetooth” in the “setting” of music play interface, and then choose “BTH-002” in the device list, the music will be transmitted to the headset. Please refer to the instruction of your mobile phone for further information. - When the volume of headset is adjusted to max. or min, you will hear a indication tone. - Remote control the function of last song/next song/pause/revert, it needs your mobile phone or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your mobile phone or Bluetooth transmitter for further information. 38 LED indicator Charging STATUS HEADSET Volume up Pairing FUNCTION LED indicator STATUS HEADSET Red LED is on Charging Red LED is off Finish charging LED indicator STATUS HEADSET Red and blue LEDs blink alternately Pairing mode Blue LED quickly blinks once every 2 seconds. Not connected to a device Blue LED quickly blinks twice every 4 seconds Set up HFP or A2DP connection 39 Blue LED quickly blinks three times every 2 seconds Set up HFP and A2DP connection Care and maintenance Blue LED gradually turns on and off Conversation mode Red LED blinks twice every 20 seconds Low power Please read the following suggestions carefully, that will help you to fulfill any warranty obligations and to enjoy this product for many years. - Keep dry and don’t put it in the dump place, in case of effecting the interior circuit of product. - Don’t put the product under sunlight or place it in hot areas. High temperatures will short the life of electronic devices, destroy the battery, or distort certain plastic. - Don’t expose the product in the cold areas. It may damage the internal circuit board. - Don’t try to take apart the product. It may damage the product if you are not professional. - Neither let the product fall off on the floor nor knock it on hard substances. It may damage interior circuit. - Don’t use intensify chemical or detergent to clean the product. - Don’t scrap the surface with sharp things. Indication tone LED indicator STATUS HEADSET Two tones every 3 seconds Conversation mode and microphone mute Three “DU” tones every 20 seconds Low power In case the product doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem. 40 41 FAQs Why does red light blink twice every 20 seconds? Battery is low, need to be recharged. Why is not the red light bright when charging? a) Please make sure the charging device connects with headset well. b) You didn’t use the headset for a long time, the battery may dry up. At this time, you have to charge the battery for 30 minutes, and then the red light will be bright. How far is the effective range between the headset and mobile phone? According to the Bluetooth standard, the max. controllable range of Class II headset is 10 meters. It varies under different environments. Why can not my cell phone search and find the headset? The mobile phone will not find the headset if headset and mobile phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected. Why can not hear the voice? a) Make sure the headset has been switched on. b) Make sure the volume is not too low or muted. c) Make sure the headset connects with the mobile phone correctly. d) Make sure the distance between the headset and the cell phone is in the normal working scope. 42 Why is the voice not clear in conversation? a) Make sure the mobile phone is in a strong signal area. b) Make sure the headset is in the function range of this product. Why can’t control the function of pause, play, last song and next song when playing music? This function needs your Bluetooth device supports AVRCP (Audio/Video Remote Control profile). Specifications Bluetooth version: Bluetooth V2.1 + EDR Bluetooth profiles:Headset, hands-free, A2DP, AVRCPAVRCP Effective range: 10 meters Working time: Music: Up to 10 hours | Talk: Up to 11hours Standby time: Up to 250 hours Input: DC: 5 V/130 mA Charging time: Approx. 3 hours Dimensions: 162 x 153,5 x 32 mm Weight : Approx. 103 g Notes: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 43 Warranty Information One year limited hardware warranty. This product is covered by a one year warranty against defects in material and workmanship. This warranty excludes the battery, which is covered by a six month warranty. Limitation of warranty The above warranty shall not apply to defects resulting from: Misuse; unauthorized modification; opening for any reason; operation or storage outside the environmental specifications for the product; in-transit damage; improper maintenance; physical damage to the unit, such as a cracked or broken screen or defect resulting from use software, accessories, media, supplies, consumables, or such items not designed for use with the product. There is no other express warranty, whether written or oral, with respect to this product. Any implied warranty of merchantability or fitness for a particular purpose is limited to the two-year duration of this written warranty. Some states, provinces, or countries do not allow limitations on how long an implied warranty lasts, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state, province to province, or country to country. 44 COPYRIGHT All rights reserved. No part of this manual may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission from the copyright holder. According to copyright law, no recorded data may be used for purposes other than personal enjoyment without permission from the copyright holder. SUPPORT For support please call the i.onik® support line on + 49 (0) 7664 403 69 12. This support line is available between 9:30 am and 5:30 pm, mon- fri (GMT). Support issues can also be emailed to [email protected], please detailed information about the problem you are experiencing. All information is subject to change without notice. 45 www.i-onik.de
This document in other languages
- Deutsch: CnMemory i.onik BTH-002