Download Toshiba 26EL933 LED TV
Transcript
32AV93*G 32/40LV93*G 26/32EL93*G 32/40HL93*G DIGITAL Series English Contents Manual Tuning ..................................... 24 Safety Precautions ................... 5 Automatic Power Down ....................... 26 Installation and important information ................................ 6 Reset TV ............................................. 26 DTV Settings ............................. 27 Where to install.................................... 6 Channels ............................................. 27 When using a Wall Bracket ................. 6 Channel Options.................................. 28 The Remote Control ................. 8 Subtitle and Audio ............................... 29 Inserting batteries and effective range of the remote ....................................... 8 Password............................................. 29 Connecting External Equipment ................................. 9 Standby Channel Update .................... 29 Parental ............................................... 29 Common Interface ............................... 30 Favorite Control ................................... 30 REGZA-LINK Connections....... 11 Favorite Program................................. 30 Channel Grouping ............................... 31 Connecting an HDMI or DVI device to the HDMI input.......... 12 Digital On-Screen Information and Programme Guide ............. 32 To connect an HDMI device ................ 12 Information .......................................... 32 To connect a DVI device...................... 14 On-Screen Information Icons .............. 32 Connecting a Computer ........... 16 Guide ................................................... 32 To connect a PC to the HDMI terminal................................................ 16 General Controls ...................... 33 Acceptable Video signals through HDMI terminals.................................... 18 Selecting Channels ............................. 33 Acceptable PC signals through HDMI terminals .............................................. 18 Quick Access Menu ............................. 33 Using the Controls ................... 19 Picture Still .......................................... 33 Stereo and Bilingual Transmissions .... 33 Subtitles............................................... 33 Input Selection..................................... 33 Switching On ....................................... 20 Using the Remote Control ................... 20 Sound Controls......................... 34 Using the Side-Key Controls ............... 20 Volume Controls and Mute Sound....... 34 Tuning the Television ............... 21 Dual ..................................................... 34 Bass, Treble and Balance ................... 34 First Time Using .................................. 21 Stable Sound ....................................... 34 Setting the Channels ................ 23 Surround Sound .................................. 34 Bass Boost .......................................... 34 Auto Tuning ......................................... 23 Dynamic Range Control ...................... 34 2 Audio Description ................................ 35 Enjoy Videos through USB Port .................................... 46 Widescreen Viewing ................. 36 Play Video Files................................... 47 Repeat Settings ................................... 48 Available Picture Size and Position Control ................................................. 37 Set ...................................................... 48 Using the Play List............................... 48 Picture Controls........................ 38 Slow Forward ...................................... 48 Picture Position ................................... 38 Step Forward ....................................... 48 Picture Mode ....................................... 38 Video Info ............................................ 48 Picture Preferences ............................. 38 Aspect Ratio ........................................ 48 Black/White Level ................................ 39 Picture Mode ....................................... 48 Cinema Mode ...................................... 39 Goto Time ............................................ 49 Colour Temperature............................. 39 REGZA-LINK Controls.............. 50 Static Gamma...................................... 39 Reset ................................................... 39 Equipment Control............................... 50 Active Backlight Control ...................... 39 Select REGZA-LINK Device ................ 50 3D Colour Management ...................... 39 REGZA-LINK Menus ................. 51 Base Colour Adjustment ...................... 40 One Touch Play ................................... 51 Digital Noise Reduction ....................... 40 System Standby .................................. 51 MPEG NR – Noise Reduction ............. 40 System Audio Control .......................... 51 Enjoy Photos through USB Port .................................... 41 Enable REGZA-LINK........................... 51 View Photo Files.................................. 41 Auto Standby ....................................... 52 Using Slide Show ................................ 42 .................................. 52 Repeat Settings for Slideshow ............ 42 Speaker Preference ............................ 52 Set Interval Time ................................. 42 Using the Play List............................... 42 REGZA-LINK Playback Device Control ................................................. 53 Background Music ............................... 42 Preference Controls ................. 54 Auto Power On .................................... 52 Photo Info ............................................ 43 On Timer.............................................. 54 Enjoy Music through USB Port .................................... 44 Sleep Timer ......................................... 54 Play Music Files .................................. 44 Panel Lock........................................... 56 Repeat Settings ................................... 45 Auto Format (Widescreen) .................. 56 Using the Play List............................... 45 4:3 Stretch ........................................... 56 Music Info ............................................ 45 Blue Screen ......................................... 56 EPG ..................................................... 55 Side Panel ........................................... 56 3 English Digital Audio Output............................. 35 English DivX Registration................................. 57 DivX Deregistration ............................. 57 System Information ............................. 57 System Upgrade.................................. 57 Text Services and Text Information ................................ 58 Setting the Modes ............................... 58 Navigating Pages using Auto .............. 58 Navigating Pages using LIST .............. 58 Control Buttons.................................... 58 PC Settings ............................... 59 Horizontal and Vertical Position........... 59 Horizontal Width .................................. 59 Clock Phase ........................................ 59 Reset ................................................... 59 Input Selection and AV Connections .............................. 60 Lip Sync Mode .................................... 60 Input Signal Selection.......................... 60 Frequently Asked Questions ... 61 Accessories .............................. 63 License Information ................. 65 4 English Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased. The Class I apparatus shall be connected to a mains socket outlet with a protective earthing connection. Air Circulation DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS. Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided. THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE. Do Not Heat Damage DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment. Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. and 35°C (94°F) max. DO NOT allow electrical equipment to be exposed # " $ such as vases, to be placed on the equipment. Mains Supply DO NOT # % sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt The mains supply required for this equipment is 220-240v AC 50Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead. WARNING: To prevent the spread of % away from this product at all times. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its is approved by ASTA or BSI to BS1362. DO NOT % &'*'+ ; legs with wood screws. To ensure complete safety, " < % " ; to the instructions. It should only be replaced by a correctly rated and DO NOT leave equipment switched on when it it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, make sure your family know how to do this. Special arrangements may need to be made for people with disabilities. IF IN DOUBT PLEASE CONSULT A COMPETENT ELECTRICIAN. Do DO read the operating instructions before you attempt to use the equipment. DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections. DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer. DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment. ABOVE ALL – NEVER let anyone, especially children, push or hit the screen, push anything into holes, slots or any other openings in the case. DO be careful with glass panels on equipment. These actions will damage screen or internal parts. WARNING: To prevent injury, this apparatus must !" ance with the installation instructions. See page 6. NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry. WARNING – excessive sound pressure from earphones or headphones can cause hearing loss. 5 English Installation and important information Where to install Sturdy tie (as short as possible) Locate the television away from direct sunlight and Stand clip strong lights, soft, indirect lighting is recommended Screw (not supplied) for comfortable viewing. Use curtains or blinds to Fixing strap Fixing strap prevent direct sunlight falling on the screen. 9~10mm metal washer Panhead Screw: advised Place the TV set on a stable, level surface that can 10mm Roundhead / Ovalhead Screw: J [ \] support the weight of the TV. As an additional safety a washer is required Flathead screw: cannot be used measure you secure the TV to the level surface or a wall, as shown in the illustration, using sturdy strap. = The screw type is dependent on the actual mounting surface. The metric thread size is 3.8-4.1mm. Otherwise secure the TV on the level surface using = Place the stand on a stable, level surface and secure the TV set by using a single screw (not supplied) through the fall prevention the mounting screw. screw hole. The LCD display panels are manufactured using an = >% ?* $ % surface. extremely high level of precision technology, how*Stand style is dependent on model ever sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction. Make sure the television is located in a position it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case. Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal. Studies indicate that plastics may weaken and crack over time from the combination effects of chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could result in serious injury and/or permanent damaged to TV and TV pedestal. Cleaning the screen and cabinet... Turn off the power, and clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage. 1 2 3 4 5 When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV. = Two people are required for installation. = To install a wall-mount from another manufacturer. 1. Unplug and remove any cables and/or other component connectors from the rear of the TV. 2. " $ % 3. Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket. 4. Always use the screws supplied or recommended by the wall mount manufacturer. Removing the Pedestal Stand: 1. Carefully lay the front of the unit face down on " over the edge. 2. Remove the screws. 3. After the screws are removed, hold the pedestal stand in place, then remove it from the TV by sliding away from the bottom of the TV. NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. 6 32AV93*G | 32/40LV93*G x 4 26EL93*G x 3 32EL93*G x 4 | 32/40HL93*G x 4 Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) ^ ii) $%^ iii) ^ iv) ^ v) ^ vi) ! " ^ any damage or loss caused as a result of the owner’s failure and/or neglect to follow the invii) "< ^ any loss or damage caused directly as a result of misuse or malfunction of the product when viii) " $^ Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or " recorded data whether caused during normal operation or misuse of the product. = The digital reception function of this television is only effective in the countries listed in the Country section of the SETUP menu. Depending on country/area, some of this television’s functions may not be + " = _`{ ; displays, video games, on-screen menus, etc. are left on the television-screen for any length of time they could become conspicuous, it is always advisable to reduce both the brightness and contrast settings. = Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines, this is not a defect of the LCD TV and is not covered under the manufacturers warranty. Regular use of other size modes (e.g.: Super Live) will prevent permanent retention. NOTE: Interactive video games that involve shooting a “gun” type of joystick at an on-screen target may not work with this TV. SYMBOL SYMBOL DEFINITION DANGEROUS VOLTAGE: ? " " " equilateral triangle is intended to alert the user to the presence of un-insulated }&'+ *J?' " < magnitude to constitute a risk of electric shock to persons. INSTRUCTIONS: The exclamation point within on equilateral triangle to alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance. WARNING: ? % " from this product at all times. 7 English Please take note EXCLUSION CLAUSE English The Remote Control Simple at-a-glance reference of your remote control. 12 13 14 15 16 17 18 19 20 In TV mode: Display on-screen information In Text mode: Access the index page Mute the sound Display the QUICK access menu Exit the menu system Display EPG Go to the previous level of the menu Display the on-screen menu > ` ` In Text mode: Change the page Colour button: Text control buttons Reveal concealed text Hold a wanted page Enlarge text display size Select a page while viewing a normal picture Inserting batteries and effective range of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, 1.5V. 1 2 3 4 5 6 7 8 9 10 11 Do not combine a used, old battery with a new one or mix battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 66 of this manual. Warning: batteries must not be exposed to excessive heat such as sunlight The performance of the remote control will or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced the batteries may need replacing. Toggle between TV ON or Standby Toggle between external input sources Still Picture To display the teletext screen TEXT subtitle pages if available Stereo/Bilingual transmissions Number buttons Audio Description Switch between ATV and DTV Change the volume Change the channel 8 Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. *a decoder could USB SOCKET be Digital Satellite or any other compatible decoder. *Model will determine power code position. HDMI 2 INPUT SOCKET POWER CORD HDMI 1 INPUT SOCKET RGB/ PC For 32AV93*G | 32/40LV93*G *a decoder could USB SOCKET be Digital Satellite or any other compatible decoder. *Model will determine power code position. HDMI 2 INPUT SOCKET POWER CORD HDMI 1 INPUT SOCKET RGB/ PC For 26/32EL93*G | 32/40HL93*G 9 English Connecting External Equipment English Aerial cables: - - - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or media recorder, connect through the decoder and/or media recorder to the television. SCART cables: - - - -- - - - - - - - - - - - - - Connect the video recorder IN/OUT or decoder TV socket to the television. Connect the media player SAT socket to the decoder MEDIA REC. socket. Before running Auto Tuning put your decoder and media recorder to Standby. HDMI® > " * $ " " ]] video signals but will also accept and display 480i, 480p, 576i, 576p, 720p and 1080p. HDMI1 also support VGA, SVGA, XGA, WXGA and SXGA. NOTE: Although this television is able to connect to HDMI equipment it is possible that some equipment may not operate correctly. A wide variety of external equipment can be connected to the back of the television, therefore the relevant owners manuals for all additional equipment must be referred to. If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired channel button. To recall external equipment, press to select. 10 English REGZA-LINK Connections The basic functions of connected audio/video equipment can be controlled using the television’s remote control if a REGZA-LINK compatible device is connected. The back of your television AV amplifier HDMI in HDMI out Playback equipment Playback equipment HDMI out HDMI out For 32AV93*G | 32/40LV93*G The back of your television AV amplifier HDMI in HDMI out Playback equipment Playback equipment HDMI out HDMI out For 26/32EL93*G | 32/40HL93*G 11 English Connecting an HDMI or DVI device to the HDMI input The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 18. NOTE: = Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a new standard. = Supported Audio format: Linear PCM and Dolby Digital, sampling rate 32/44.1/48kHz. To connect an HDMI device Connect an HDMI cable (type A connector) from the device to the HDMI terminal. For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ® ). ( = If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this mode. = HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration). HDMI cable (not supplied) HDMI device HDMI out For 32AV93*G | 32/40LV93*G 12 English HDMI cable (not supplied) HDMI device HDMI out For 26/32EL93*G | 32/40HL93*G To view the HDMI device video, press the button to select HDMI 1 or HDMI 2 mode. 13 English To connect a DVI device Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to the HDMI 1. = The recommended HDMI-to-DVI adapter cable length is 6.6ft (2m). = An HDMI-to-DVI adapter cable transfers video only. = Separate analogue audio connection are not supported for audio receivers. HDMI-to-DVI adapter cable (not supplied) DVI device For 32AV93*G | 32/40LV93*G 14 English HDMI-to-DVI adapter cable (not supplied) DVI device For 26/32EL93*G | 32/40HL93*G To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: = > DVI device. = > * television. [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, !"!"# !" $$!"# ##% & ' 15 English Connecting a Computer With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television. To connect a PC to the HDMI terminal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable. If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary. the back of your television 2 Computer HDMI-to-DVI adapter cable (not supplied) For 32AV93*G | 32/40LV93*G 16 English the back of your television 2 Computer HDMI-to-DVI adapter cable (not supplied) For 26/32EL93*G | 32/40HL93*G For acceptable PC and video signal formats, see page 18. NOTE: = The edges of the images may be hidden. = If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly. 17 English Acceptable Video signals through HDMI terminals Resolution H. Frequency (KHz) V. Frequency (Hz) 480i 15.734 60.000 480p 31.500 60.000 576i 15.625 50.000 576p 31.250 50.000 720p 37.500 50.000 720p 45.000 60.000 1080i 28.125 50.000 1080i 33.750 60.000 1080p 27.000 24.000 1080p 28.125 25.000 1080p 33.750 30.000 1080p 56.250 50.000 1080p 67.500 60.000 Acceptable PC signals through HDMI terminals Resolution H (KHz) V(Hz) Pixel Clock (MHz) H-Polarity V-Polarity H-Total V-Total 640 x 480 31.369 59.940 25.175 Negative Negative 800 525 640 x 480 37.861 72.809 31.500 Negative Negative 832 520 640 x 480 37.500 75.000 31.500 Negative Negative 840 500 800 x 600 35.160 56.250 36.000 Positive Positive 1024 625 800 x 600 37.879 60.317 40.000 Positive Positive 1056 628 800 x 600 48.077 72.188 50.000 Positive Positive 1040 666 800 x 600 46.875 75.000 49.500 Positive Positive 1056 625 1024 x 768 48.363 60.004 65.000 Negative Negative 1344 806 1024 x 768 60.023 75.029 78.750 Positive Positive 1312 800 1280 x 768 47.776 59.870 79.500 Negative Positive 1664 798 1360 x 768 47.712 60.015 85.500 Positive Positive 1792 795 1280 x 1024 63.981 60.020 108.000 Positive Positive 1688 1066 1280 x 1024 79.976 75.025 135.000 Positive Positive 1688 1066 1920 x 1080 67.500 60.000 148.500 Positive Positive 2200 1125 18 English Using the Controls While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. Common Interface USB HDMI 2 INPUT SOCKET Power Up / down (Volume or channel) Programme / Volume / Source GREEN LED − On Timer RED LED − Standby GREEN LED − Power on Headphone IR SENSOR For 32AV93*G | 32/40LV93*G Common Interface USB HDMI 2 INPUT SOCKET Power Up / down (Volume or channel) IR SENSOR Programme / Volume / Source GREEN LED − On Timer RED LED − Standby GREEN LED − Power on Headphone For 26/32EL93*G | 32/40HL93*G 19 English Switching On If the RED Stand By LED is unlit, check that the plug is connected to the power supply. If the picture does not appear press on the remote control, it may take a few moments. To put the television into Standby press on the remote control. To view the television press again. The picture may take a few seconds to appear. For energy saving: We recommend that you use the television with the factory settings. The factory settings are for energy saving. Unplugging the mains plug will cut energy use to zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday. + " ' sumption and thus saves money by reducing electricity bills. NOTE: Putting the television into standby mode will reduce energy consumption, but will still draw some power. Using the Remote Control To set up the television you will now need to use the on screen menus. Press MENU on the remote control to see the menus. ? on the navigation ring on the remote control. To use the options, press ? move up and down through the menu and use to select the required choice. Follow the onscreen instructions. The functions of each menu are described in detail throughout this manual. Using the Side-Key Controls Press to adjust volume. to change programme selection, then press to adjust programme selection. Press until Source List is displayed, then press to scroll through the list until Press and hold desired input source is located. ( ) * NOTE: Inserting the headphone plug will mute the sound from all speakers. 20 English Tuning the Television Before switching on the television put your decoder and media recorder to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 8. Digital Subtitle Language select your preferred language. First Time Using and press the button. The Language menu will appear. Digital Subtitle Language 2nd to select your preferred language. Language English Español Nederlands Norsk slovenščina Český бългapcки Hrvatski Français Italiano Svenska Suomi Magyar Pyccкий Srpski Türkçe Audio Language your preferred language. Deutsch Português Dansk Polski Slovensky Română Eλληvıκά Українське Select OK Audio Language 2nd select your preferred language. Press Enter NOTE: ? the Quick Setup menu. NOTE: This function is accessed in the SETUP ¼ Quick Setup menu. language (English, Français, Deutsch, Español, Italiano, Português, Nederlands, Svenska, Dansk, Norsk, Suomi, % > % % + ¡¢£¤ % '¥¥¦§¨© % ?ª%« ¬¯±²³´µ Press Tuner Mode Antenna Select Country and try (Austria, Belgium, Bulgaria, Croatia, Czech, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Luxembourg, Netherlands, Norway, Others, Poland, Portugal, Romania, Russia, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, UK or Ukraine). Quick Setup Select OK Location RETURN Back Antenna or Cable. to enter Quick Setup menu. Country Digital Subtitle Language Digital Subtitle Language 2nd Audio Language Audio Language 2nd to select Tuner Mode. Germany German Turkish German Turkish OK Tuner Mode 21 English Press Tuning Mode ATV, DTV or ATV and DTV. Start Scan and press . to select Location. Location To use the TV for the display in a store showroom, please select [Store]. [Home] mode is recommended for normal use. Store Auto tuning ATV DTV Select OK Auto tuning RETURN Back Home or Store. For normal home use, select Home. NO RETURN Back YES or NO. Press menu. to enter the Auto tuning NOTE: Please make sure the aerial is connected to the TV before tuning. Auto tuning Previous settings will be lost ! Press EXIT for no change. Tuning Mode Start Scan ATV and DTV OK Edit C3 Station: The search will begin for all available stations. The slide bar will move along the line as the search progresses. You must allow the television to complete the search. When the search is complete the television will automatically select channel 1. This may not be a clear picture or the signal may be weak, so the station order can be changed using ATV/DTV Manual Tuning in the SETUP menu. Location You have selected [Store]. This mode consumes more energy. Are you sure you want to set to this mode? OK Auto tuning Found 0 0 EXIT Stop When Store tion window appears. Select Progress 1 % 0 % Channel: RETURN Back 22 English Setting the Channels NOTE: When Parental Block is activated, the 4-digit password is needed. Start Scan and press to start Auto Tuning. Auto Tuning The Auto tuning function will completely retune the television and can be used to update the channel list. Auto tuning ATV DTV NOTE: It is recommended that Auto tuning is run periodically to ensure that all new services are added. Progress 2 % 0 % Channel: NOTE: All the current channels and settings, for example, the locked channels, will be lost. APPLICATIONS SETUP Switching between tuner modes will change the features available on your television. All the current channels and settings, for example, the locked channels, will be lost. In the SETUP Tuner Mode and press . YES or NO. PREFERENCES Auto tuning, to enter the submenu. and press SETUP Language Country Tuner Mode Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup OK Enter Tuner Mode This may change the features available on your TV. Continue? 1/2 English Germany Antenna NO OK OK OK OK OK Edit RETURN Back SETUP Language Country Tuner Mode Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup Auto tuning ATV and DTV OK Edit RETURN Back Auto tuning, and press to enter the submenu. Previous settings will be lost ! Press EXIT for no change. Start Scan OK Enter Press MENU SETUP and press to enter the submenu. Tuning Mode ATV, DTV or ATV and DTV. Tuning Mode Station: Tuner Mode - Cable Press MENU SETUP and press to enter the submenu. SOUND C4 EXIT Stop Tuner Mode - Antenna PICTURE Found 0 0 1/2 English Germany Cable OK OK OK OK RETURN Back OK Enter 23 RETURN Back English Tuning Mode ATV, DTV or ATV and DTV. Auto tuning Previous settings will be lost! Press EXIT for no change. Tuning Mode Start Scan Operator Selection Scan Type Start Frequency (MHz) End Frequency Modulation Symbol Rate Network ID Edit Manual Tuning There are two TV modes: ATV and DTV that can be tuned-in manually using Manual Tuning. ATV mode - Antenna/Cable ATV and DTV Press MENU to enter the SETUP and press submenu. OK Quick Scan Auto Auto Auto Auto Auto ATV Manual Tuning and press to enter the submenu. SETUP RETURN Back Language Country Tuner Mode Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup Operator Selection Others, Ziggo or UPC. NOTE: Operator Selection can only be adjusted when Country is Netherlands. Scan Type, and Full Scan or Quick Scan. OK Enter NOTE: Channels with a weak signal may be missed by Quick Scan. 1/2 English Germany Antenna OK OK OK OK OK RETURN Back position you want to arrange and then Operator Selection, Scan Type, Start Frequency (MHz), End Frequency, Modulation, Symbol Rate or Network ID, and use % the information or select Auto for tuning. ATV Manual Tuning Position 1 2 3 4 5 6 Start Scan and press to start tuning. Channel C1 C2 C3 C4 C5 C6 Station −−−−− −−−−− −−−−− −−−−− −−−−− −−−−− NOTE: = The information should be given by your cable provider. = Network ID is only available for Quick Scan. Sort OK Enter RETURN Back your preferred position. As you do so the other stations will move to make room. ATV Manual Tuning Position 1 2 3 4 5 6 Store 24 Channel C2 C1 C3 C4 C5 C6 Station −−−−− −−−−− −−−−− −−−−− −−−−− −−−−− RETURN Back Press MENU SETUP and press to enter the submenu. DTV Manual to enter the subTuning and press menu. ATV Manual Tuning Manual fine tuning 1 BG P C 69 0 − − − − − SETUP Select A A B B Change C OK Save D E F G RETURN Back H I Position: The number to be pressed on the remote control. System: C Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source. D Skip: means nothing has been stored or the facility to skip the channel is On. E Channel: The channel number on which a station is being broadcast. G Searching: Search up and down for a signal. H ? ; ? ; function. I OK OK OK OK RETURN Back RF Channel and key pad on the remote to enter a channel. DTV Manual Tuning Weak Signal Strength Quality Average RF Channel 0−9 Input Strong Poor 5 Start Scan OK Edit RETURN Back Start Scan and press to start tuning. Station: characters. Press English Germany Antenna OK Enter Signal Class: ? F 1/2 Language Country Tuner Mode Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup to save. 25 English DTV mode - Antenna Press to display the breakdown shown below. English DTV mode - Cable Automatic Power Down Press MENU SETUP and press to enter the submenu. The TV will automatically turn itself off (standby) within 4 hours, if you do not touch the control buttons on the remote control or on the TV control panel. It will also automatically turn off if no input signal is detected after approximately 15 minutes. DTV Manual to enter the subTuning and press menu. SETUP In the SETUP select Automatic Power Down. 1/2 Language Country Tuner Mode Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup English Germany Cable Press to select Off, 4h, 6h or 8h. OK SETUP OK Automatic Power Down Location Software Upgrade System Information Reset TV OK OK OK Enter Edit DTV Manual Tuning Weak Average OK OK RETURN Back Reset TV Strong Selecting Reset TV will reset all TV settings to their original factory values. Poor Frequency Modulation Symbol Rate Start Scan 0−9 Input OK RETURN Back Frequency, Modulation or Symbol Rate, and use % the information or select Auto for tuning. Signal Strength Quality 2/2 Off Home 113.000 MHz QAM 16 4000 KS/s In the SETUP select Reset TV and press . OK YES or select NO to exit and press . Edit RETURN Back Reset TV Previous settings will be lost ! Press EXIT for no change. Start Scan and press to start tuning. NO Select 26 OK Enter RETURN Back English DTV Settings Re-number Channels The channel order may be changed to suit your personal preference. Press the button on the remote to renumber the highlighted channel. NOTE: This function is only available in DTV mode. Edit the channel number using the number keys on the remote and press . Press MENU SETUP and press to enter the submenu. PICTURE SOUND APPLICATIONS SETUP Channels Position 8 − − − 804 805 806 807 273 PREFERENCES DTV Settings and press to enter the submenu. 0−9 Input TV Name Rossia 1 Rossia 24 NTV TRK 5 kamal Bibigon Service Information Radio Three OK Enter RETURN Back Channels and press . Skip DTV Settings Channels Channel Options Subtitle and Audio Password Parental Local Time Setting Standby Channel Update Favorite Control Favorite Program Favorite Network Channel Grouping Common Interface Press the button on the remote. A icon appears. OK OK OK OK OK Channels Position 803 804 805 806 807 273 22:17 Off On OK On RETURN Back Channels. Channels Position 803 804 805 806 807 273 OK Sort TV Name Rossia 1 Rossia 24 NTV TRK 5 kamal Bibigon Service Information Radio Three Re−number Rossia 1 Rossia 24 NTV TRK 5 kamal Bibigon Service Information Radio Three OK OK Sort OK Enter TV Name Skip RETURN Back 27 Re−number Skip RETURN Back English Sort % ( ) box. channel and then press . A tick icon appears. Channels Position 803 804 805 806 807 273 Channel Options CH 800 TV TV Name DEEJAY TV Name Rossia 1 Rossia 24 NTV TRK 5 kamal Bibigon Service Information Radio Three Select Press box. OK Store OK Enter RETURN Back to select. A tick appears in the NOTE: Skipped channels cannot be selected by P or P but still be accessed by direct entry (when tuned a icon will be displayed in the banner to indicate as a skipped channel). RETURN Back wish to swap with the one selected in Step 8 and then press . The positions of the two channels are swapped. Parental Control Channels Position 804 803 805 806 807 273 TV Locking channels stops the viewing of digital channels, and they can only be accessed by entering the password. Name Rossia 24 Rossia 1 NTV TRK 5 kamal Bibigon Service Information Radio Three OK Store In the DTV Settings Channel Options, and press to enter the submenu. % ) box. ( RETURN Back Press to select. A tick appears in the box. If the password has already been set, password entry will be required to set the locked channels. Channel Options This function is to setup the Skip or Lock for currently watched channel. Skip Channels The feature allows you to set channel that will be skipped when P or P are used to tune. In the DTV Settings Channel Options, and press to enter the submenu. Channel Options CH 800 OK Enter DEEJAY TV Select DTV Settings Channels Channel Options Subtitle and Audio Password Parental Local Time Setting Standby Channel Update Favorite Control Favorite Program Favorite Network Channel Grouping Common Interface OK OK OK OK OK TV Name OK Enter RETURN Back From this point on, when any of the channels in the Channel Options list are selected, the password must be entered before they can be accessed. 22:17 Off On OK On OK RETURN Back 28 You can choose the Subtitle Type or Audio Type from Normal or Hearing Impaired. If the Hearing Impaired is selected, it provides subtitle services to deaf and hard of hearing viewers with additional descriptions. Subtitle Language or Audio Language allow " " of soundtrack language, provided they are currently being broadcast. Password New Password Confirm Password NOTE: ”0000” cannot be used. In the DTV Settings Subtitle And Audio, and press to enter the submenu. Parental This function blocks channels or programmes that you do not want to or that you do not want your children to watch. A password is required to access this function. The factory default password is “0000”. Subtitle Display On or Off. Subtitle Type or Audio Type Normal or Hearing Impaired. NOTE: When Parental Control is activated, you will need to enter the 4-digit password before you enter the DTV Settings submenu under the SETUP menu. After auto tuning, all the channel blocks will be cleared. Digital Subtitle Language, Digital Subtitle Language 2nd, Audio Language or Audio Language 2nd your preferred language. In the DTV Settings Parental, and press to enter the submenu. Password Change the 4-digit parental control password. The factory default password is “0000”. Enter the 4-digit password. age 4~18 or select None to turn this function off or Block All. In the DTV Settings Password, and press to enter the submenu. NOTE: This function is available for programmes with Age Rating information. DTV Settings Channels Channel Options Subtitle and Audio Password Parental Local Time Setting Standby Channel Update Favorite Control Favorite Program Favorite Network Channel Grouping Common Interface OK OK OK OK OK Standby Channel Update If the Standby Channel Update is set to On, when the TV is in standby mode, Digital Tuning is automatically executed and any new channels are saved. 22:17 Off On OK On In the DTV Settings Standby Channel. OK On or Off. OK Enter RETURN Back 29 English Enter a new 4-digit password, and re-enter the new password again to Subtitle and Audio English When Favorite Control is On, the favorite channel list appears when pressing . Common Interface The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. Favorite List 800 Maori Television Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM. A box will CAM has been inserted. In the DTV Settings menu, Common Interface, and press to enter the submenu. Favorite Program Details of the CAM should now be available. The favorite channel list supports maximum 9 favorite channels. NOTE: The software updating of CI Plus CAM may be automatically executed. At this time, any Recording/Reminder programme timer will be cancelled. In the DTV Settings Favorite Program, and press to enter the submenu. Favorite Control DTV Settings Channels Channel Options Subtitle and Audio Password Parental Local Time Setting Standby Channel Update Favorite Control Favorite Program Favorite Network Channel Grouping Common Interface This function is used to disable or enable the favorite channel list. In the DTV Settings Favorite Control. On or Off. OK OK OK OK OK 22:17 Off On OK On OK DTV Settings Channels Channel Options Subtitle and Audio Password Parental Local Time Setting Standby Channel Update Favorite Control Favorite Program Favorite Network Channel Grouping Common Interface Edit OK OK OK OK OK OK Enter 22:17 Off On RETURN Back NOTE: Favorite Network function is only available for Norwegian models. OK On OK RETURN Back 30 Channel Grouping There are Video, Radio and Text services combined in a channel list for DTV services, The function provides the selection of channel change with one service group or among all services by pressing P and P . button on the reNOTE: Press the mote to delete the channel. Favorite List 800 English channel and press to edit. Maori Television In the DTV Settings Channel Grouping. On or Off. DTV Settings OK Edit Delete RETURN Back Channels Channel Options Subtitle and Audio Password Parental Local Time Setting Standby Channel Update Favorite Control Favorite Program Favorite Network Channel Grouping Common Interface Service Type, (TV), (Radio) or (TEXT). Favorite List Favorite Program 800 Maori Television Service Type Channel Change OK Save RETURN Back OK On OK RETURN Back When Channel Grouping is On, the and P will channel change by P be within a single service group, press ATV/DTV on the remote control can be still used for change services among ATV, DTV Video, DTV Radio and DTV Text. Channel, and channel. Press 22:17 Off On 800 Edit Select OK OK OK OK OK to save the settings. NOTE: ? delete the desired channel. 31 English Digital On-Screen Information and Programme Guide When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. Information Guide Select the on-screen guide by pressing GUIDE. The guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear. Press , and the information screen will appear giving details of the channel and programme currently being viewed. 10:18 Sun, 30 Nov 1 BBC Parliament Westminster Hall Prime Minister's Questions programmes scheduled for the channel selected. 07:00 − 11:30 11:30 − 12:00 News/Current.. 72 Minutes Left Recorded coverage of questions in the House of Commons to Prime Minister Gordon Brown from Wednesday 26 November. Change For details of other programmes cur up and down the channel list. EXIT Exit NOTE: In order for the recording operation to work properly, the media recorder must be set to the same time as the TV. Regarding the process for recording, please refer to the owner’s manual of the recording equipment. Now or Next information guide. On-Screen Information Icons Icons will appear on the Information screen giving details about the programmes being broadcast. Details of these icons are listed below: Icon Description Service type (TV, Radio, TEXT) Service info Skip Mono Stereo Dual mono Audio info Multichannel Dolby Digital Dolby Digital+ Audio/ Subtitle info Hearing Impaired HD, SD 16:9, 4:3 Video format (HD, SD) Video Aspect Teletext Subtitle (Single, Multi) Event info Multi-audio track AD 4 - 18 Audio Description Parental rating Encrypted 32 English General Controls The General Controls will allow you to select channels and information, use the sound controls, personalise the picture style, and select external equipment. Selecting Channels Subtitles To select a channel use the numbered buttons on the remote control. and Channels can also be selected using P P . If Subtitles are available for your current programme, pressing the SUBTITLE button will toggle Subtitles on or off. Picture Still Stereo and Bilingual Transmissions This feature is used to hold a still image on the screen. Press to hold an image on the screen, press again to cancel. If stereo or dual language broadcasts are transmitted the word Stereo or Dual will appear on the screen each time channels are changed, disappearing after a few seconds. If the broadcast is not in stereo the word Mono will appear. Stereo: Press to select Stereo or Mono. Bilingual: If a bilingual programme is offered, the word Dual will display on screen. To change between languages, press to switch between Dual 1 and Dual 2. Input Selection Use the Input Selection feature if the television does not switch over automatically when using an external device. Pressing , a list will appear on-screen showing all external equipment. to select. Inputs TV 1 2 3C HDMI1 HDMI2 MEDIA PC Quick Access Menu Quick access helps you access some options quickly such as Picture Size, Picture Mode, Media Player, Sleep timer, System Information and REGZA-LINK. Press the QUICK button to display the Quick access menu and " % to change. Quick access Picture Size Picture Mode Media Player Sleep Timer System Information REGZA−LINK HDMI® displays equipment connected to Input HDMI on the back of the television. It is designed for best performance with 1080i/1080p Wide Standard OK 00:00 OK NOTE: Quick access items are different depending on the current mode. 33 English Sound Controls Volume Controls and Mute Sound Volume Press or Stable Sound The Stable Sound feature limits high volume levels in order to prevent the extreme changes in volume that can occur when channels are changed or a programme switches to a commercial. to adjust the volume. Sound Mute Press on the remote once to turn the sound off and again to cancel. Press MENU SOUND and press to enter the submenu. Stable Sound, On or Off. Dual " a soundtrack in more than one language, the DUAL feature allows selection between them. Surround Sound Press MENU SOUND and press to enter the submenu. PICTURE SETUP SOUND APPLICATIONS Surround Sound enhances depth of the sound. Press MENU SOUND and press to enter the submenu. PREFERENCES Surround Sound On or Off. Dual, and press " Dual1 or Dual2. Bass Boost SOUND Dual Bass Treble Balance Bass Boost Surround Sound Stable Sound Dynamic Range Control Digital Audio Output Audio Description OK Enter Dual1 0 0 0 4 Off Off On Bass Boost enhances depth of the sound. Press MENU SOUND and press to enter the submenu. Bass Boost, OK OK Dynamic Range Control RETURN Back This feature allows control of audio compression for some digital TV programmes (MPEG-1 and MPEG-2 audio programmes are not supported). Bass, Treble and Balance The sound controls are accessible in digital and analogue modes. Press MENU to enter the SOUND and press submenu. Press MENU SOUND and press to enter the submenu. Dynamic Range Control On or Off. Bass, Treble or Balance the setting. 34 Audio Description Press MENU to enter the SOUND and press submenu. Audio Description is an additional narration describing on-screen action, body language, expressions and movements for people with visual disabilities while watching the TV. This function enables you to choose the type of narrations. Digital Audio to enter the subOutput and press menu. Press MENU SOUND and press to enter the submenu. Audio Format, PCM or Auto. Audio Description and press to enter the submenu. Digital Audio Output Audio Format Audio Delay Audio Delay Time (ms) Edit English Digital Audio Output PCM Auto 0 Audio Description On or Off. Audio Description RETURN Back Audio Description Mixing Level On 80 Audio Delay, Auto or Manual. Edit RETURN Back Audio Delay Time (ms) the setting. Mixing Level, NOTE: Audio Delay Time (ms) is only available when Audio Delay is Manual. NOTE: Mixing Level can only be adjusted when Audio Description is On. NOTE: Press the AD button on the remote control to switch the Audio Description On or Off. 35 English Widescreen Viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Wide (Expect PC) Wide (PC only) 4:3 Super Live Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. This setting will show the picture without over scan and side panel when watching a PC signal source via HDMI or PC terminal. Use this setting to view a true 4:3 broadcast. This setting will enlarge a 4:3 image to horizontally and vertically, holding better proportions at the centre of the image. Some distortion may occur. Cinema " ; ! video tapes, this setting will eliminate or reduce the black bars at the top and bottom of the screen by zooming in and selecting the image without distortion. Subtitle When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed. 14:9 Native Use this setting when watching a 14:9 broadcast. When using a PC connected via HDMI this setting will show the picture without over scan, i.e. WYSIWYG. This option is only available when watching video signal source via HDMI. 36 Subtitle English This setting will show the picture without over scan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. Normal “Dot by Dot” is a non-scaling display. Depending on the input signal format, the setting will display the picture with side panels and/or bars at the top and bottom (i.e VGA input source). Dot by Dot Press QUICK to display the Quick access Picture Size, Quick access Picture Size Picture Mode Media Player Sleep Timer System Information REGZA−LINK Wide Standard OK 00:00 OK You can choose the picture size from Wide, 4:3, Super Live, Cinema, Subtitle, 14:9, Native, Normal or Dot by Dot. Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. Available Picture Size and Position Control Wide 4:3 Super Live Cinema Subtitle 14:9 Native Normal Dot by Dot o o o o o o x x x SD o o o o o o x x x HD o o o o x o o x x Scart o o o o o o x x x CVBS o o o o o o x x x SD o o o o o o x x x HD o o o o x x x x x SD o o o o o o o x x HD o o o o x x o x x D-SUB o x x x x x x o o DVI o x x x x x x o o ATV DTV YPbPr HDMI 37 English Picture Controls Most of the picture controls and functions are available in both digital and analogue modes. NOTE: Features not available will be greyed out. Picture Position Picture Mode The Picture Position may now be adjusted to suit personal preference. You can adjust the picture appearance by selecting the preset value in picture mode based on the programme category. Press MENU SETUP and press to enter the submenu. PICTURE SOUND SETUP APPLICATIONS Press MENU PICTURE and press to enter the submenu. PREFERENCES PICTURE Picture Position to enter the submenu. and press SETUP OK Enter 1/2 APPLICATIONS PREFERENCES Picture Settings Picture Mode Active Backlight Control Back Light Contrast Brightness Colour Tint Sharpness Black/White Level Cinema Mode Colour Temperature Static Gamma Reset OK OK OK OK OK RETURN Back " # adjust the settings as required. Edit Standard High 70 95 50 50 0 50 Middle On Medium 0 OK RETURN Back Picture Mode Dynamic, Standard, Mild, Movie, Game or User. Picture Position Horizontal position Vertical position Reset SETUP Picture Settings and press to enter the submenu. English Germany Antenna Language Country Tuner Mode Auto tuning ATV Manual Tuning DTV Manual Tuning DTV Settings AV connection Picture Position Quick Setup SOUND 0 0 OK NOTE: Game is not available for the TV input mode. Edit RETURN Back Picture Preferences You can customise current picture mode settings while selecting User. In the Picture Settings Back Light, Contrast, Brightness, Colour, Tint, Sharpness. 38 The static gamma feature allows you to adjust the levels of black in the picture. This function increases the strength of dark areas of the picture, which improves picture In the Picture Settings Static Gamma. In the Picture Settings Black/White Level. Static Gamma (-5~+5). # Off, Low, Middle or High. The effect depends on the broadcast and is most noticeable on dark colours. Reset This feature resets all picture settings to the factory settings. In the Picture Settings to reset settings. to select Reset and press Cinema Mode < \_ ond, whereas movie software such as DVD, etc., that you enjoy watching on television at home runs at 30 (NTSC) or 25 (PAL) frames a second. To convert this signal to reproduce a smooth motion and picture quality, select the Cinema Mode. NOTE: If any picture settings have not been changed, Reset is not available. Active Backlight Control When the Active Backlight Control feature is activated, High mode will control the backlighting levels depending on various scenes such as picture motion, bright scene or dark scene. Low mode will control the backlighting level on dark scene. In the Picture Settings Cinema Mode. On or Off. Colour Temperature In the Picture Settings menu, press Active Backlight Control. Colour Temperature increases the ‘warmth’ or “coolness” of a picture by increasing the red or blue tint. Off, Low or High. In the Picture Settings Colour Temperature and 3D Colour Management Colour Temperature Medium, Warm or Cool to suit your preference. When 3D Colour Management is set to On, it allows the Base Colour Adjustment feature to become available. You can adjust the picture colour quality by selecting from 6 base colour adjustments : Red, Green, Blue, Yellow, Magenta or Cyan. Colour Temperature Colour Temperature Red Level Blue Level Green Level Medium 0 0 0 In the PICTURE select 3D Colour Management. On or Off. Red Level, Blue Level or Green Level to adjust the settings as required. NOTE: When a DVD movie with subtitle is playing back, this mode may not work correctly. 39 English Static Gamma Black/White Level English Base Colour Adjustment MPEG NR – Noise Reduction When watching a DVD, the compression may cause some words or picture elements to become distorted or pixelated. Using the MPEG NR feature reduces this effect by smoothing out the edges. The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. It only can be adjusted when 3D Colour Management is set to On. In the PICTURE to select Base Colour Adjustment and press to enter the submenu. In the PICTURE select MPEG NR. Off, Low, Middle or High. " to adjust and press . Base Colour Adjustment Hue Saturation Brightness 0 0 0 Red 0 0 0 Green 0 0 0 Blue 0 0 0 Yellow 0 0 0 Magenta 0 0 0 Cyan OK Reset OK Edit RETURN Back Hue, Saturation or Brightness. Base Colour Adjustment Hue Saturation Brightness Red 0 # required. NOTE: In the PC Input mode, this function is not available. Digital Noise Reduction DNR (Digital Noise Reduction) enables you to “soften” the screen representation of a weak signal to reduce the noise effect. In the PICTURE select DNR. Off, Low, Middle or High. NOTE: This function is not available for HDMI input. 40 English Enjoy Photos through USB Port ? *" " % · Image Photo Resolution (Mstat suggest) Required DRAM size (Mbytes) Remark Base-line 15360x8704 (1920x8x1088x8) 3.96 Depends on RAM size Progressive 1024x768 6.00 non-interface 9600x6400 3.66 interface 1200x800 3.66 9600x6400 3.66 JPEG PNG BMP NOTE: = Resolution is a reference design, limited only by DRAM (Dynamic Random Access Memory) size and performance = The larger the resolution, the more memory required = The smaller the resolution, the less performance required (decrease the time required to display a picture) = A JPEG decoder is a hardware decoder, with a max resolution of 15360 x 8704 = A PNG/BMP decoder is a software decoder (running on a co-processor), with a max resolution that depends on DRAM size Photo and press to enter the submenu. View Photo Files Insert a USB storage device and press on the remote. MEDIA and press . USB 2.0 Inputs TV 1 2 3C HDMI1 HDMI2 MEDIA PC Photo Music Movie Move OK Select you wish to view and press to enter. or P to page up or down. Press P 1\1 USB:\ Return P 41 Page Move OK Select RETURN Back English to view. sired photo and press Set Interval Time Press MENU to change the settings when viewing a photo. Press MENU to change the settings when viewing a photo. and press to select the desired interval time (3/5/10/15/30/60/90 Sec). NOTE: If Repeat is On, slide show starts " Off On 15 sec 788 X 1157 00001 / 00004 0 −−−−/−−/−− −−:−− 0000−1.jpg Using the Play List Previous Move OK Select RETURN Press MENU to change the settings when viewing a photo. Back ` = : Go to the previous photo : Go to the next photo = : Select slide show mode = = : Select repeat mode : Select the desired interval time = : Clockwise rotation 90° = : Counterclockwise rotation 90° = : Show play list = : Set the background music = : Photo information = and press . to show the photo. press Press RETURN on the remote to collapse the list. 0000−1.jpg j g 0000−2.jpg 0000−3.jpg 0000−4.jpg Off On and press 1/1 15 sec 788 X 1157 00001 / 00004 0000−1.jpg Using Slide Show Play List P This view allows you to watch a slide show of the photos. In this view mode, the only content that locates on the same directory shall be played. 0 −−−−/−−/−− −−:−− Page Move OK Select RETURN Back Background Music Set the background music when viewing photo. Press MENU to change the settings when viewing a photo. Press MENU to change the settings when viewing a photo. to turn On or Off. and press and press . NOTE: Slide show stops at the last photo in the directory. Repeat Settings for Slideshow Off Press MENU to change the settings when viewing a photo. On 15 sec 788 X 1157 to turn On or Off. 0 −−−−/−−/−− −−:−− 00001 / 00004 0000−1.jpg and press Background Music Move 42 OK Select RETURN Back and press English . Background Music 0 Play List Move OK Select RETURN Back to play music. Press RETURN on the remote to collapse the list. 1\1 USB:\ Return Music Photo Video P Page Move OK to select One or Folder. Select RETURN Back and press Photo Info Info tent number, photo title, shooting date and time, resolution etc.). Press MENU to change the settings when viewing a photo. and press . 0000−1.jpg Resolution: Size: Date: Time: Off On 15 sec 00001 / 00004 0000−1.jpg −−−−/−−/−− −−:−− 788 X 1157 788 X1157 323 KBytes −−−− / −− / −− −− : −− : −− Info. EXIT EXIT The information will be removed by timeout (about 15 sec) or press to exit. 43 English Enjoy Music through USB Port ? >{ " % · Audio Codec File Extension Bit Rate MPEG1 Layer2 MP3 32Kbps~ 448Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) MPEG1 Layer3 MP3 32Kbps ~ 320Kbps(Bit rate) 32KHz ~ 48KHz(Sampling rate) to play. music and press Play Music Files Insert a USB storage device and press on the remote. MEDIA and press . Play Inputs TV 1 2 3C HDMI1 HDMI2 MEDIA PC Folder 00:00:02 / 00:02:42 00001 / 00003 001.MP3 Movie Move OK Select to enter. wish to play and press or P to page up or down. Press P and press 1\1 USB:\ Return Music Photo Video P Page Move OK Select RETURN OK Select RETURN Back ` = / : Play or pause the selected music : Rewind the selected music = : Fast forward the selected music = : Go to the previous music = : Go to the next music = = : Stop play : Select the desired repeat = interval: - Repeat Off - Repeat One: Repeat the selected music once - Repeat Folder: Repeat all music : Show play list = : Music information = USB 2.0 Music 16 Pause Move Music and press to enter the submenu. Photo Remark Back 44 English Repeat Settings Press . to select Off, One or Folder. Using the Play List and press . to play music. Press EXIT on the remote to collapse the list. Pause 001.MP3 002.MP3 003.MP3 1/1 Folder 00:00:02 / 00:02:42 00001 / 00003 001.MP3 16 Play List P Page Move OK Select RETURN Back Music Info Info number, music title, Bit Rate, Artist, Sampling, Year, and size). and press . 001.MP3 Album: Title: Bit Rate: Artist: Sampling: Year: Size: Music 01 320K Singer 44K 2010 6366 KBytes Folder 00:00:02 / 00:02:42 00001 / 00003 001.MP3 16 Info Move OK Select RETURN Back The information will be removed by timeout (about 15 sec) or press to exit. 45 English Enjoy Videos through USB Port ? * *" " % · File Container Extension dat, mpg, mpeg ts, trp, tp vob mp4, m4v MPEG Video Codec MPEG1 MPEG2 MPEG2-TS H.264 H.264-TS MPEG2 MPEG2-PS MPEG2 MP4 H.264 MPEG4 SPEC Bit Rate (Mbit/sec) 1080P@ 30fps 20 1080P@ 30fps 20 1080P@ 30fps 20 MKV MPEG1 MPEG2 1080P@ 30fps 20 >'\` > º High Level \¼_` > ºJ _] >'\` > º High Level >'\` > º High Level >'_` and Advanced Simple ºJ ½ \¼_` > ºJ _] 1080P@ 30fps 20 >'\` > º High Level >'_` and Advanced Simple ºJ ½ MPEG4 DivX 3.11 divx, div AVI(1.0, 2.0) DivX 4.12 DMF0,1,2 DivX 5.x 1080P@ 30fps 20 >'_` and Advanced Simple DivX 6 H.264 MPEG1 \¼_` > ºJ _] MPEG2 AVI(1.0, 2.0) MPEG4 avi DMF0,1,2 DivX 3.11 1080P@ 30fps 20 >'\` > º >'_` and Advanced Simple ºJ ½ DivX 4.12 DivX 5.x DivX 6 AVI(1.0, 2.0) MJPG (Motion JPEG) H.264 Sorenson H.263 Remark \¼_` > ºJ _] H.264 mkv 640x480@ 30fps 10 1080P@ 30fps 20 46 \¼_` > ºJ _] MP4: GMC is not supported » may not be played. Insert a USB storage device and press on the remote. MEDIA and press . Play Inputs TV 1 2 3C HDMI1 HDMI2 MEDIA PC Standard 16:9 Folder 00:00:08 / 00:02:28 00001 / 00001 001.avi = Music Select RETURN Back OK : Fast back the selected video = : Fast forward the selected video = : Go to the previous video = : Go to the next video = : Stop play = : Select the desired repeat interval: - Repeat Off - Repeat One: Repeat the selected video once - Repeat Folder: Repeat all video = : Repeat from A to B - Set A: A-Set Repeat and Start - Set B: B-Set Repeat and repeat from A to B Select wish to view and press to enter. or P to page up or down. Press P 1\1 USB:\ Return Music Photo Video Move OK Select RETURN Back and press to play. / : Play or pause the selected video = Movie Move Page OK ` USB 2.0 P 16 Pause Move Movie and press to enter the submenu. Photo English Press MENU to change the settings when viewing a video. Play Video Files = : Show play list = : Video information = : Slow forward the selected video = : Step forward the selected video = : Aspect Ratio = : Picture Mode = : Allows you to input a search time and press 47 English Repeat Settings Step Forward Press MENU to change the settings when viewing a video. The feature allows you to view a video one frame at a time. Press MENU to change the settings when viewing a video. and press to select Off, One or Folder. to play step by step. Set Press MENU to change the settings when viewing a video. Video Info Info number, video title, audio track, subtitle, program, size, etc.). and press to select Set A, Set B or None. Press MENU to change the settings when viewing a video. Using the Play List Press MENU to change the settings when viewing a video. and press and press . and press . Play 001.avi press to play the video. Press RETURN on the remote to collapse the list. Resolution: AudioTrack: Subtitle: Program: Size: 320 x 214 1/1 −− / 0 −− / 0 1862 KBytes Standard Close 16:9 Folder 00:00:08 / 00:02:28 16 Play 00001 / 00001 001.avi 001.avi Info Move Select RETURN Back The information will be removed by timeout (about 15 sec) or press to exit. Standard 16:9 Folder 1/1 00:00:08 / 00:02:28 00001 / 00001 001.avi 16 Aspect Ratio Play List P Page Move OK Select RETURN Back Press MENU to change the settings when viewing a video. Slow Forward and press to select Native, 4:3 or 16:9. The feature changes forward speeds. Press MENU to change the settings when viewing a video. Picture Mode Press MENU to change the settings when viewing a video. and press to select SF2X, SF4X, SF8X, SF16X or Play. and press to select Standard, Mild, Movie or Dynamic. 48 English Goto Time The feature allows you to view a selected time during the video. Press MENU to change the settings when viewing a video. and press . Use the number key pad on the remote to enter time. Press to go to the input time. Play Input search time: Standard 0 0 : 0 0 : 0 0 16:9 OK Folder 00:00:08 / 00:02:28 00001 / 00001 001.avi 16 Goto Time Move OK Select RETURN Back 49 English REGZA-LINK Controls This feature uses CEC (Consumer Electronics Control) technology, and allows the control of Toshiba REGZA-LINK compatible equipment from the television’s remote control. NOTE: Not all Toshiba products currently support REGZA-LINK. Equipment Control Select REGZA-LINK Device The REGZA-LINK mode on the television’s remote control allows the control of connected REGZA-LINK equipment being watched. To control the REGZA-LINK select the equipment with REGZA-LINK input source selection, then switch the mode on the remote control to REGZA-LINK and press any buttons. The available functions are dependent on the equipment connected. Not all the remote control keys may be available. Please refer to the operation manual for each piece of equipment connected. Press . A list appears on screen showing modes and all stored external equipment. The REGZA-LINK icon appears automatically after detected with REGZA-LINK compatible equipment. shown with the REGZA-LINK icon. Inputs TV 1 2 3C HDMI1 HDMI2 MEDIA PC NOTE: The television features that can be controlled by the connected equipment are: Standby, Volume and Sound Mute. REGZA−LINK appears showing all connected REGZA-LINK equipment. REGZA-LINK equipment, and then press to select. Inputs TV 1 2 3C HDMI1 HDMI2 MEDIA PC 50 HDMI1 Quick Setup Disc Player REGZA−LINK English REGZA-LINK Menus By activating the Enable REGZA-LINK feature in the REGZA-LINK Setup menu, individual REGZA-LINK features can then be activated. One Touch Play Enable REGZA-LINK The function of REGZA-LINK will automatically power on the television that was in standby mode and switch the television’s input source to the port connected with the audio/video equipment by powering-on or playing from the audio/video equipment. When the Enable REGZA-LINK is set to On, it allows the other functions to be enabled. Press MENU PREFERENCES and press to enter the submenu. NOTE: This feature is dependent on the connected equipment and television setting. PICTURE SOUND SETUP APPLICATIONS PREFERENCES REGZA-LINK Setup, and press to enter the submenu. System Standby This feature automatically switches the connected equipment into standby when the television goes into standby and conversely for the television to switch into standby when connected equipment goes into standby. It is selected in the REGZA-LINK Setup menu. PREFERENCES REGZA−LINK Setup Teletext Panel Lock Auto Format 4:3 Stretch Blue Screen Side Panel DivX Registration DivX Deregistration NOTE: This feature is dependent on the connected equipment and television setting. System Audio Control OK Enter Using the Speaker Preference feature allows the television’s remote control to adjust the volume or mute the sound of the speakers con * ' * REGZA-LINK equipment are selected in the input source selection and that the Speaker Preference is set to Audio Receiver in the REGZA-LINK Setup menu. OK Auto Off On Off On 1 OK RETURN Back Enable REGZA-LINK select On or Off. REGZA-LINK Setup Enable REGZA−LINK Auto Power On Auto Standby Amplifier Control Speaker Preference NOTE: * " its input source changed or the volume adjusted, the sound will be output from * < % ?* speakers has been selected. Turn the television off then on again to output the sound from the TV’s speakers. The full function may not work and is depend Edit 51 On On On On TV Speakers RETURN Back English Auto Power On The Auto Power On setting allows the television to be automatically switched On or Off if a REGZA-LINK device is turned on or off. In the REGZA-LINK Setup menu, press Auto Power On. On or Off. Auto Standby When the Auto Standby is enabled, switching off the television will automatically switch off all connected REGZA-LINK equipment. In the REGZA-LINK Setup menu, press Auto Standby. On or Off. When is set to On, it allows the Speaker Preference feature to become available. In the REGZA-LINK Setup menu, press . On or Off. Speaker Preference This feature allows the audio output preference to be set to the TV speakers or Ampli % ? television’s remote control adjust or mute the volume of the audio. In the REGZA-LINK Setup menu, press Speaker Preference when is On. TV Speakers or . NOTE: This function is only available when the TV is connected to audio receivers that support CEC function. 52 This is a new feature that uses CEC technology and allows you to control REGZA-LINK compatible devices from the TV remote control via HDMI connection. When there are two or more REGZA-LINK devices connected to the television, the device selection menu appears. Highlight the desired device, and then press to select. Remote Control 1 Pass-Through Control Panel 1 2 3 GUIDE EXIT MENU RETURN 2 3 4 5 4 6 8 7 9 6 8 5 MENU ROOT CONTENTS TOP DVD 7 9 NOTE: = REGZA-LINK in the Quick access menu, and then press . The Pass-Through Control Panel appears. = Some functions are only available when the Pass-Through Control Panel is displayed on the screen. Please refer to the following procedure. = Please refer to the Remote Control " % the Pass-Through Control Panel. = MENU and RETURN buttons on the remote control are unavailable when the Pass-Through Control Panel is on. No Item Description 1 GUIDE Turn off the desired REGZA-LINK device. 2 EXIT Close the Pass-Through Control Panel. 3 In contents menu: Navigate contents menu. Enter contents menu, ect. When viewing the video: Pause. Stop. Rewind. Forward. Play. 4 5 6 7 8 9 MENU RETURN ROOT DVD CONTENTS TOP Skip Reverse. Skip Forward. Root key. DVD key. Contents key. Top key. NOTE: These functions depend on the devices connected. 53 English REGZA-LINK Playback Device Control English Preference Controls Power On Time key pad on the remote to enter the time. On Timer This feature allows you to set the television to turn on automatically to a preset channel at a certain time of day or after a certain length of time. When On timer is set to On, the green On Timer indicator on the front of the television is lit. Repeat and ONCE, DAILY, Mon.~Fri., Mon.~Sat. or Sat.~Sun. Input and press ATV, EXT 1, EXT 2, EXT 3, HDMI 1, HDMI 2, PC or DTV. Press MENU to enter APPLICATIONS and press the submenu. PICTURE SOUND SETUP Channel and number or use the number key pad on the remote to enter the channel number. PREFERENCES APPLICATIONS On timer and to enter the submenu. press NOTE: = Channel is only available when the Input is ATV or DTV. = Blank screen will appear if not tuned. APPLICATIONS EPG On timer Sleep Timer Demo OK Enter OK 00:00 OK Volume and use the number key pad on the remote to enter the volume. Time Until Power On number key pad on the remote to enter the time for the TV to turn on automatically. RETURN Back Enable On Timer On or Off. NOTE: Time Until Power On is only available when Enable DTV Clock is Off. On timer On On 00:00 ONCE ATV 0 30 00:00 Enable On Timer Enable DTV Clock Power On Time Repeat Input Channel Volume Time Until Power On Sleep Timer The television can be set to turn itself Off after a certain length of time. Press MENU APPLICATIONS. Sleep Timer (Turn off the TV). Edit RETURN Back ?* should turn off, or use the number key pad on the remote to enter the time. NOTE: The settings are only available when Enable On Timer is On. Enable DTV Clock On or Off. NOTE: Power On Time and Repeat are only available when Enable DTV Clock is On. 54 EPG (Electronic Programme Guide) supports 9 sets of timers. You can set or cancel a timer for a selected programme within the guide. When the TV is on and the timer activates, a dialogue box is shown informing you that the programme is about to start. When the TV is in standby mode and the timer activates, the TV will wake up with backlight off, speaker mute on, and change to the channel selected. You must set the time correctly before using this function. All set timers are cleared when performing a new channel scan. Programme Timers 4 6 11 Date Time Fri, 27 Aug 07:52−07:58 Fri, 27 Aug 08:05−08:35 Fri, 27 Aug 09:45−11:55 Rossia K Rossia 2 SIT 5 Delete OK Edit RETURN 4 Rossia K 08:54:17 Fri, 27 Aug Rossia K Radio Rossia NTV Rossia 2 TRK 5 Kanal Bibigon Service Information.. Service Information.. SIT 5 Move More Info 09:04−10:58 10:59−11:02 11:02−11:07 11:07−12:29 12:33−12:57 13:00−13:03 13:03−13:07 13:07−13:17 13:18−13:44 Timer List Channel 4 6 11 Deejay Hits The Club Deejay Tg TIMER RETURN Back Press 4 Rossia K 08:54:17 Fri, 27 Aug Save RETURN RETURN Back to save the settings. = When the timer is set, the Timer LED on the front panel lights on. = After adjustment, the TV clock may not match the time in the EPG Programme Guide. The EPG Programme Guide time follows the broadcast stream time which can not be adjusted. Back Repeat or # settings as required. Press Save NOTE: Rossia K Deejay Programme Timers 09:04−10:58 07:42:12 Fri,Chiama 27 AugItalia 10:59−11:02 Radio Rossia 4 Rossia K 11:02−11:07 NTV "Deejay Chiama Italia". 11:07−12:29 Deejay Hits Rossia 2 09:04−10:58 27 Aug 2010 12:33−12:57 The Club TRK 5 Kanal 13:00−13:03 Deejay Bibigon Repeat ONCETg 13:03−13:07 Service Information.. Subtitle Off 13:07−13:17 Deejay News Beat Service Information.. 13:18−13:44 Deejay News Beat SIT 5 OK OK Channel, Date, Start Time, End Time, Repeat or Subtitle # settings as required. to enter the programme and press TIMER menu. Programme Guide 27 Aug Repeat ONCE ONCE ONCE 2010/08/27 08:05 08:35 ONCE Off Date Start Time End Time Repeat Subtitle Deejay News Beat Deejay News Beat OK Date Time Fri, 27 Aug 07:52−07:58 Fri, 27 Aug 08:05−08:35 Fri,801 27 Rossia Aug 09:45−11:55 K Programme Timers Rossia K 8012 Rossia K Rossia SIT 5 Channel Edit Edit 07:35:39 Fri, 27 Aug Deejay Chiama Italia channel and press to enter the programme schedule. 4 4 5 6 7 8 9 10 11 Back NOTE: Press the button on the remote to delete the timer. Programme Timers 4 4 5 6 7 8 9 10 11 Repeat ONCE ONCE ONCE programme and press to edit. Press GUIDE on the remote to display the Programme Guide. Programme Guide 27 Aug 07:42:58 Fri, 27 Aug Channel to save the settings. 55 English Press the button on the remote to enter the Timer List menu. EPG English Panel Lock 4:3 Stretch Panel Lock disables the buttons on the television. All buttons on the remote control can still be used. When 4:3 Stretch is activated, this function will switch 4:3 format programmes into a full screen picture. Press MENU to enter PREFERENCES and press the submenu. In the PREFERENCES 4:3 Stretch. On or Off. PICTURE SOUND SETUP APPLICATIONS NOTE: In HDMI signal format, this function is available. PREFERENCES Panel Lock and On or Off. Blue Screen When Blue Screen is selected, the screen will turn blue when no signal is received. PREFERENCES REGZA−LINK Setup Teletext Panel Lock Auto Format 4:3 Stretch Blue Screen Side Panel DivX Registration DivX Deregistration Edit OK Auto Off On Off On 1 In the PREFERENCES Blue Screen. On or Off. OK NOTE: This function is not available in DTV mode. Side Panel RETURN Back The Side Panel feature lightens or darkens the band each side of the screen when in 4:3 or 14:9 format. This helps prevent image retention of the band and can also make viewing in bright or dark conditions more comfortable. When Panel Lock is On, a reminder will appear when the buttons on the television are pressed. If the standby button is pressed the television will switch off and can only be brought out of standby by using the remote control. In the PREFERENCES Side Panel. # required. Auto Format (Widescreen) When this television receives a true Widescreen picture and Auto format is On, it will automatically be displayed in Widescreen format, irrespective of the television’s previous setting. In the PREFERENCES Auto Format. On or Off. 56 English DivX Registration System Upgrade View the registration code that is required to " DivX® VOD (Video On Demand) service on the TV. DivX® VOD is a video delivery service that lets you rent or purchase video content recorded in DivX® ? are compatible with the DivX® VOD service, the TV needs to be registered as a DivX® player. In the PREFERENCES select DivX Registration and press . Press MENU to enter the SETUP and press submenu. PICTURE SOUND SETUP APPLICATIONS PREFERENCES System to enter the Upgrade and press submenu. Auto Upgrade On or Off. You must register your device to play DivX® protected videos. Software Upgrade Registration code: XXXXXXXXXX Auto Upgrade Auto Install Manual OAD USB Upgrade Register at http://vod.divx.com On Off OK OK OK Edit RETURN Back Insert a USB storage device. USB Upgrade to start upgrading the and press " DivX Deregistration In the PREFERENCES to to select DivX Deregistration and press delete the registration. OK Cancel to exit and press . USB Upgrade 0% Deregistration code: XXXXXXXX Deregister at http://vod.divx.com OK Enter Continue with registration? OK NOTE: Firmware upgrading is suggested to be done by the professional service personnel. Cancel System Information In the SETUP System Information and press to display " System Information TOSHIBA 2012 Dec 13 2011, 19:52:05, FW: v0.14 (PR) Weak 530 MHz Average Strong Good OK Enter RETURN Back RETURN Back 57 English Text Services and Text Information This television has a multi-page text memory, which takes a few moments to load. Setting the Modes Control Buttons In the PREFERENCES Teletext. Below is a guide to the functions of the remote control text buttons. Displays the index/initial page: to access the index/initial page. The Press page displayed is dependant on the broadcaster. Reveals concealed text: To discover the solutions on quiz and joke button. pages press the PREFERENCES REGZA−LINK Setup Teletext Panel Lock Auto Format 4:3 Stretch Blue Screen Side Panel DivX Registration DivX Deregistration OK Enter OK Auto Off On Off On 1 OK Holds a wanted page: At times it is convenient to hold a page of text. Press and will appear in the top left of the screen. The page will be held on-screen until the button is pressed again. RETURN Back Auto or LIST. Enlarges the text display size: Press once to enlarge the top half of the page, press again to enlarge the bottom half of the page. Press again to revert to normal size. Navigating Pages using Auto If Fastext is available, four coloured titles will appear at the base of the screen. To access one of the four given subjects, press the relevant coloured button on the remote control. For further information on your particular text system(s), see the broadcast text index page or, consult your local Toshiba dealer. Selects a page while viewing a normal picture: , a norEnter the page number then press mal picture will be displayed. The television will indicate when the page is present by displaying the page number at the top of the screen. To display " text service (see the index page of your text service). By pressing " " played as and when they are broadcast. Press again to cancel the display. How to change the page: " sub page is available. ? " changing channels. Navigating Pages using LIST If Fastext is available, four coloured titles with numbers 100, 200, 300 and 400 have been programmed into the television’s memory. To view these pages press the relevant coloured buttons. To change these stored pages press the relevant coloured button and enter a new 3 digit number. This number will change in the top left of the screen and in the coloured highlight. to store. The bars at the bottom of Press " " is pressed all four page numbers showing at the bottom will be stored and the previous ones will be lost. is not pressed the selection will be forgotIf ten when text is cancelled. Other pages may be viewed by entering the 3 or digit page number – but DO NOT press these pages will be stored. 58 English PC Settings = Most of the picture controls and functions are available. However features not available will be greyed out. = In the PC input mode, the Manual Setting is not displayed. = First press in order to select the PC input mode. = This function may not be available for some signal or if no signal is received. = The optimum points of the clock phase and sampling clock adjustments may be incomprehensible according to the input signals. Horizontal and Vertical Position Horizontal Width Connect the PC (as shown in the “Connecting a Computer” section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference. In the PC Setting to select Horizontal width. # required. Press MENU to enter the SETUP and press submenu. PICTURE SOUND SETUP APPLICATIONS Clock Phase The Clock phase matches the PC signal with the LCD display. Adjusting this can clear horizontal stripes and picture blur. PREFERENCES PC Setting, and to enter the submenu. press In the PC Setting to select Clock phase. SETUP Language Country AV connection PC Setting Auto Adjust Automatic Power Down Location Software Upgrade English Germany OK OK OK Reset Off Home This feature resets all PC settings to the factory settings. OK NOTE: If any PC settings have not been changed, Reset is not available. OK Enter In the PC Setting to select Reset. RETURN Back Press Horizontal Position or Vertical Position # $ NOTE: = When a PC is connected using HDMI none of these functions will be available. = The screen is disrupted momentarily when adjusting PC setting. This is not a sign of malfunction. = The default settings and adjustment ranges may vary depending on the input signal format. PC Setting Horizontal position Vertical position Horizontal width Clock phase Reset Edit . 0 0 0 0 OK RETURN Back 59 English Input Selection and AV Connections Use the Input Selection feature if the television does not switch over automatically when using an external device. Lip Sync Mode Input Signal Selection This option activates an auto audio/video display timing adjustment function that allows HDMI source devices to accurately perform synchronization automatically. All of the above HDMI settings require a proper HDMI source device. If HDMI source products do not support these functions, the TV may not work properly when activating these functions. You can select source of AV or S-VIDEO from this function. Press MENU SETUP and press to enter the submenu. PICTURE SOUND SETUP APPLICATIONS PREFERENCES AV connection, to enter the submenu. and press NOTE: = In a non-HDMI signal mode, this function is not available. = In your HDMI connection is capable of 1080p and/or your TV is capable of refresh rates greater than 60Hz or supports Deep Colour, you will need a Category2 cable. Conventional HDMI/DVI cables may not work properly with this mode. EXT1 input and AV or S-VIDEO. AV connection Lip Sync EXT1 input Edit 60 On AV RETURN Back English Frequently Asked Questions Q A Q A + . Check that the television is on and that all connections are made properly. 0 . Q + . A Interference or a weak signal. Try a > tuning may help: Select the ATV Manual Tuning in the SETUP menu. Highlight the station and press , then tuning. The colour is factory set to Auto to automatically display the best colour system. When using an external source, if there is little or no colour, improvements may sometimes be achieved. ATV Manual Tuning 0 2 Manual fine tuning With the external source playing, select Manual setting in the SETUP menu. 1 Auto, NTSC 4.43, NTSC 3.58, SECAM or PAL. Select Select Q A Q A Change OK Save P C 69 Change 0 OK Save − − − − − RETURN Back # picture and sound. Press and then RETURN. Manual setting Colour system: Auto EXT 1 BG RETURN Back Q + )34 . A Make sure the VCR or DVD player is connected to the television, then select the correct input by pressing . Q + . A Check all cable connections and that the volume has not been turned down or that the sound has not been muted. 61 + ) $. Check that the batteries aren’t dead or inserted incorrectly. +5. A Good performance of text depends on a strong broadcast signal. If the text is unreadable or garbled, check the aerial, satellite or cable connection. Go to the main index page of the text service and look for the User Guide. This will explain the basic operation of text in some detail. Q +5 5. A Text has been selected while viewing an external source. No text will appear on-screen or a box may appear stating no information is available. Select a broadcasting channel and press to access. English Q + 70'%. A Connect the source via a SCART cable and play. Select Manual setting from the SETUP menu and set the Colour System to Auto. Manual setting Colour system: Auto EXT 1 Select Q A Q A A Change OK Save RETURN Back + . Use the universal password 1276, then change to a new number of your choice. + ) !". Make sure to use cables with the HDMI ® logo ( ). Some early HDMI equipment may not work properly with the latest HDMI TV products, due to adoption of new standards. Q A Q +4%934 $ . A After roughly 15 minutes without any input video signal at TV mode, the TV will turn off to save power. Check the correct input has been chosen: S-VIDEO or AV. +04 . 62 English = ? " " DVB-T Broadcast systems/ Broadcast systems/channels channels UK UHF 21-68 PAL-I UHF UK21-UK69 France VHF 05-10 PAL-B/G UHF E21-E69 (VHF 01-05) VHF E2-E12, S1-S41 UHF 21-69 Germany VHF 05-12 SECAM-L UHF F21-F69 UHF 21-69 VHF F1-F10, B-Q Austria VHF 05-12 SECAM-D/K UHF R21-R69 UHF 21-69 VHF R1-R12 Switzerland VHF 05-12 UHF 21-69 Italian VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Spain Nederlands Sweden Finland Greece Video Input VHF 05-12 UHF 21-69 VHF 05-12 UHF 21-69 VHF 05-12 UHF 21-69 VHF 05-12 UHF 21-69 Annual power consumption*** (approx.) PAL, SECAM, NTSC 3.58/4.43 EXT1 Input/Output 21-pin SCART EXT2/EXT3 Input RCA jacks RCA jacks USB Port On mode power consumption** (approx.) UHF 21-69 External connections RGB/PC HDMI 1/2 Audio EXT2/EXT3 Digital Audio Visible Screen Size (approx.) Input Input D-sub HDMI® Auto, Mixed, RGB, Composite, S-Vídeo / TV Out (EXIT2) Video (EXIT3) Y, PB/CB/PR/CR RGB RCA jacks Audio L + R (shared) Output Coaxial (S/PDIF) Interface version: USB 2.0 USB Flash Driver USB Class: FAT32 File system: Stereo B Class 32LV93*G B Class 80cm 32LV93*G 80cm 40LV93*G 102cm 26EL93*G 66cm 32EL93*G 80cm 32HL93*G 80cm 40HL93*G 102cm 32AV93*G 55.9W 32LV93*G 54.5W 40LV93*G 87.2W 26EL93*G 27.0W 32EL93*G 29.6W 32HL93*G 31.5W 40HL93*G 46.8W 32AV93*G 81.6KWh/y 32LV93*G 79.6KWh/y 40LV93*G 127.3KWh/y 26EL93*G 39.4KWh/y 32EL93*G 43.3KWh/y 32HL93*G 46.0KWh/y 40HL93*G 68.3KWh/y ** Tested in accordance with IEC 62087-BD Ed. 2.0:2008 in default settings. *** Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used. Standby power consumption (approx.) Screen Resolution (pixels) Nicam 2 Carrier System 32AV93*G 32AV93*G 32AV93*G <0.3W 32LV93*G <0.3W 40LV93*G <0.3W 26EL93*G <0.3W 32EL93*G <0.3W 32HL93*G <0.3W 40HL93*G <0.3W 32AV93*G 1366 x 768 32LV93*G 1920 x 1080 40LV93*G 1920 x 1080 26EL93*G 1366 x 768 32EL93*G 1366 x 768 32HL93*G 1920 x 1080 40HL93*G 1920 x 1080 40LV93*G B Class Display 16:9 26EL93*G A Class 32AV93*G 5W + 5W 32EL93*G A+ Class Sound Output (At 10% Distortion) 32LV93*G 5W + 5W 32HL93*G A+ Class 40LV93*G 7W + 7W 40HL93*G A+ Class 26EL93*G 5W + 5W 32EL93*G 5W + 5W 32HL93*G 5W + 5W 40HL93*G 7W + 7W 63 English Power consumption (approx.) Weight (approx.) TV with stand Gross weight TV without stand Dimensions (H x W x D mm) (approx.) 32AV93*G 130W 32LV93*G 126W 40LV93*G 218W 26EL93*G 60W 32EL93*G 68W 32HL93*G 76W 40HL93*G 101W 32AV93*G 9.5kg 32LV93*G 9.0kg 40LV93*G 14.0kg 26EL93*G 6.0kg 32EL93*G 9.0kg 32HL93*G 9.5kg 40HL93*G 14.5kg 32AV93*G 12.5kg 32LV93*G 12.5kg 40LV93*G 18.5kg 26EL93*G 8.5kg 32EL93*G 12.5kg 32HL93*G 12.5kg 40HL93*G 18.5kg 32AV93*G 8.7kg 32LV93*G 8.2kg 40LV93*G 13.0kg 26EL93*G 5.5kg 32EL93*G 8.5kg 32HL93*G 8.9kg 40HL93*G 13.7kg 32AV93*G 785 x 528 x 205 32LV93*G 785 x 528 x 205 40LV93*G 980 x 641 x 240 26EL93*G 620 x 426 x 175 32EL93*G 746 x 507 x 205 32HL93*G 736 x 497 x 205 40HL93*G 924 x 604 x 225 Headphone Socket R3.5mm stereo Operating Conditions Temperature: 5oC - 35oC (41oF - 94oF) Humidity: 20% - 80% (non-condensing) Accessories Remote control 2 batteries (AAA, IEC R03 1.5V) User Manual # " 64 = ! # $# = DivX®:%® and associated logos $9% % &' 2;<=>?;@B;F?G??HB ;>J>;JGB;>J=<;F = !"!" !" $$!"# ##% & ' KL&0"4:4"ML2:® is a digital :##% 9% 0 :%® :45 : = !(MP#@ Q ""' 0 KL&0"4:4"MLL7M!K720 :%® device must be registered in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nglish License Information English Cleaning the screen and cabinet… 0 + Disposal… 0 M&2 Disposal of products 0 " 0 0$ $ KJ@<GG> assure the proper disposal of products and batteries and thus help to prevent potential negative * Q Disposal of batteries and/or accumulators EU 0 3 " N(O NO 3N%O N<GG?3??3M%O N(ONO 3N%O * Q In conformity with the EEE Regulation. EU Conformity Statement “This product is marked with “CE” and complies therefore with the applicable harmonized European standards listed under the Low Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC.” Responsible for CE-marking is TOSHIBA EUROPE GMBH Hammfelddamm 8 D41460 Neuss. Germany DVB is a registered trademark of the DVB Project © TOSHIBA Television Central Europe Sp. z o.o. 2012 All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland # " 66 © TOSHIBA Television Central Europe Sp. z o.o. 2012 All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul. Pokoju 1, Biskupice Podgórne, 55-040 Kobierzyce, Poland Specification is subject to change without notice.