Download Peerless DS-ACC760 mounting kit

Installation and Assembly:
Cable Release Kit
Model: DS-ACC760
NOTE: Read entire instruction sheet before you start installation and assembly.
Parts List
Description
A fastener piece
B cable Qty.
4
4
A
Part #
145‐1144
600‐0153
Before you start make sure all parts listed are included with your product.
B
1
Remove top release mechanism from right and left side of video wall mount assembly wall plate.
REMOVE
TOP RELEASE
MECHANISM
1 of 2
ISSUED: 05-04-10 SHEET #:145-9077-1
2. Run cable (B) through hole in video wall mount assembly and fastener piece (A) as shown.
3. Run cable (B) through hole in release mechanism and up through second row of holes in fastener piece (A) as shown.
4. For easy accessibility: Tape or secure loop end of cable onto top of display or wall.
REPEAT STEPS WITH OPPOSITE SIDE OF VIDEO WALL MOUNT.
2
HOLE
B
4
3
LOOP
B
B
A
A
RELEASE
MECHANISM
HOLE
DISPLAY
2
Position DS-ACC760 cables in locations as shown.
Additional Cable Release Kits may be required if more than three displays are mounted horizontally.
2 of 2
ISSUED: 05-04-10 SHEET #:145-9077-1
© 2010, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.