Download Panasonic DMC-FP7
Transcript
Advanced (Playback) Operations performed during slide show Display control panel by touching screen. •If there is no operation for approx. 2 seconds, the operation icon will disappear. [q/h]: Play/Pause [g]: Exit [i]: Forward to next picture (While paused) [u]: Back to previous picture (While paused) [:]: The setting screen returns. [4] [3]:Adjust volume •You can also adjust the volume level by using the zoom lever. Changing the Slide Show settings You can change the settings for Slide Show Playback by selecting [Effect] or [Setup] on the Slide Show menu screen. [Effect] This allows you to select the screen effects or music effects when switching from one picture to the next. [Natural], [Slow], [Swing], [Urban], [Off], [Auto] •When [Urban] has been selected, the picture may appear in black and white as a screen effect. •[Auto] can be used only when [Category Selection] has been selected. The pictures are played back with the recommended effects in each category. •Some [Effect] will not operate when playing back pictures displayed vertically. [Setup] [Duration] or [Repeat] can be set. Item [Duration] Settings 1 SEC. / 2 SEC. / 3 SEC. / 5 SEC. [Repeat] ON / OFF [Music] ON / OFF •[Duration] can be set only when [OFF] has been selected as the [Effect] setting. Note •It is not possible to add new music. •Motion pictures cannot be played back as a slide show. When [Motion Picture] in the category is selected, the first image of each motion picture is shown in the slide show. - 89 -