Download Supermicro SSE-X24S network switch

Chapter 5: Web Based Management Utility
Local Preference
Figure 5-127. BGP Local Preference Configuration Page
Clicking the LOCAL PREF tab brings up the BGP LOCAL PREFERENCE CONFIGURATION
page (Figure 5-127), which allows you to configure the Local Preference value for
routes. The parameters for this page are shown in Table 5-103.
Table 5-103. BGP Local Preference Configuration Page Parameters
Parameter
Description
Local Preference ID
This parameter specifies the Local Preference ID, which is the index for this
table.
Remote AS
This parameter specifies the AS number from which the route update is
received.
IP Address Prefix
This parameter specifies the IP Address prefix for which the update is received.
IP Address Prefix
Length
This parameter is used to calculate the subnet.
Intermediate AS
This parameter represents the intermediate AS between the BGP peers.
Direction
This parameter can be set for the incoming or the outgoing packets using In and
Out values.
Value
This parameter specifies the Local preference value to be associated with this
learnt path.
Preference
This parameter is used to enable/disable filtering.
Status
This parameter specifies the status of the entry.
5-147