Download NEC SpectraView Reference 241
Transcript
Profiler User Manual LCD flat panels Some LCD monitors offer near to none of these control options (e.g. notebook monitors). Some of them have a brightness control only, which dims the backlight (not to be confused with CRT’s brightness control which sets the luminance of the black point). Due to the necessary correction, these monitors are not suited for color critical work or for soft proofing. LCD monitors with an analog connector only will yield inferior calibration quality altogether. Higher quality LCD monitors (like the NEC MultiSync family of monitors) offer 10 or more bit data processing. Only this type of monitors satisfies higher quality demands. These monitors offer settings for black and white luminance and white point. CRT - monitors In CRTs the intensity of the 3 phosphors is controlled by an analog signal that can be modulated nearly infinitely variable. Since the intensity of each channel can be controlled individually (gain), the color temperature can be set very exactly. Gradation curves in a CRT can not be influenced, each monitor has it’s more or less fixed gamma. That’s why a CRT can not be fully hardware calibrateable. 44