1
Download SMC SMC8150L2 UK network switch
Transcript
VLAN Commands 4 switchport gvrp This command enables GVRP for a port. Use the no form to disable it. Syntax [no] switchport gvrp Default Setting Disabled Command Mode Interface Configuration (Ethernet, Port Channel) Example Console(config)#interface ethernet 1/6 Console(config-if)#switchport gvrp Console(config-if)# show gvrp configuration This command shows if GVRP is enabled. Syntax show gvrp configuration [interface] interface • ethernet unit/port - unit - Stack unit. (Always unit 1) - port - Port number. (Range: 1-26/50) • port-channel channel-id (Range: 1-32) Default Setting Shows both global and interface-specific configuration. Command Mode Normal Exec, Privileged Exec Example Console#show gvrp configuration ethernet 1/6 Eth 1/ 6: GVRP configuration: Enabled Console# 4-165
