Download Supertooth Voice

search for devices then select ST VOICE and enter
pincode 0000.” This means the kit is now ready to pair.
Note: If you selected the wrong language, just turn off the
SUPERTOOTH VOICE and bring it back to pairing mode to
be able to select one more time from the available languages.
3. While the kit is in pairing mode, access the Bluetooth
menu of your phone. Turn on the Bluetooth function
then execute a Bluetooth search. (See your phone’s
manual.)
4. When the phone displays the list of Bluetooth devices,
select ST VOICE.
5. Enter password/pin code 0000 and press OK. “Pairing
successful to phone. Loading phonebook. Please
wait.” will be announced on the kit.
6. The contacts in your phone will be downloaded to the
kit. The Bluetooth Indicator (3) turns violet for 1-2
seconds.
Note: Some phones will display a question or request
on the phone screen before it allows the kit to download
the phonebook.
Just accept any request (e.g.
Connection...?, Allow Internet access…?, DUN…?).
7. The number of contacts will be announced while the
download is ongoing.
IMPORTANT NOTICE: Some Symbian phones do not
support automatic Phonebook downloading. In this
case, “Automatic transfer not supported by phone.
Please refer to manual or press red button to cancel
phonebook transfer.” will be announced then proceed
to Section F to transfer the phonebook manually from
the phone menu to the kit or press red button or End/
Reject Button (2) of SUPERTOOTH VOICE to connect
the kit to the phone without phonebook transfer.
8. When download is complete, “SUPERTOOTH VOICE
ready. Connected to phone” will be announced.
Accept connection request from the phone if a prompt
is displayed.
Important Note:
Most phones automatically connect to the kit after pairing.
With some phones you need to connect manually after
pairing. Go back to Bluetooth > Paired devices > highlight
ST VOICE > press Options > then press Connect.
The kit is now ready to use. When a call is received on