Download Argus 141
Transcript
9 VoIP test Adaptive Entry of the minimum (min) and maximum jitter (max) sizes of the jitter buffer and the initial buffer: value (init). Range: 20 to 600 ms min: 60ms init: 60ms max:120ms Codecs Preparation of a list of voice codecs to be used. If there are multiple codecs in the list, the priority is determined by the order in the list. Switch between softkey sets < > The marked codec will be moved down one place in the list. < > The marked codec will be moved up one place in the list. <Insert> A display of the still available voice codecs will open. If a voice codec is marked with a in this list (Codec Selection list), it will be added to the Codec Priority list (in the active list of voice codecs) <Del.> Delete the marked codec from the list Accept the codec priorities DTMF DTMF is a Dual-Tone Multi-Frequency dialing procedure. settings Mode: DTMF mode settings Choose one of the following settings automatic, SIP Info, RFC 2833 or inband. Default setting: automatic Duration: The VoIP DTMF Time setting Range: 40 to 1000 ms Up to 200 ms in increments of 10, 200 to 300 ms in increments of 20, 300 to 1000 ms in increments of 100. Default setting: 80 ms Increase or decrease VoIP DTMF time. 108 ARGUS 141