Download APC NetBotz Rack Sensor Pod 150

Installation
Manual
NetBotz®
Rack Sensor Pod 150
NBPD0150
This manual is available in English on the enclosed CD.
Dieses Handbuch ist in Deutsch auf der beiliegenden CD-ROM verfügbar.
Este manual está disponible en español en el CD-ROM adjunto.
Ce manuel est disponible en français sur le CD-ROM ci-inclus.
Questo manuale è disponibile in italiano nel CD-ROM allegato.
本マニュアルの日本語版は同梱の CD-ROM からご覧になれます。
Instrukcja Obsługi w jezyku polskim jest dostepna na CD.
O manual em Português está disponível no CD-ROM em anexo.
Данное руководство на русском языке имеется на прилагаемом компакт-диске.
您可以从包含的 CD 上获得本手册的中文版本。
동봉된 CD 안에 한국어 매뉴얼이 있습니다 .
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Document overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Additional documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
InfraStruXure-certified . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Physical Description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Install the NetBotz 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Toolless peg-mount installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Rack-mount installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Connect Sensors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Configure and Monitor Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Upgrade the NetBotz 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Clean the NetBotz 150 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Two-Year Factory Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Terms of warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Non-transferable warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Exclusions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Warranty claims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Obtaining service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
NetBotz Rack Sensor Pod 150 Installation Manual
i
Introduction
Product description
The American Power Conversion (APC®) NetBotz Rack Sensor Pod 150 connects to a NetBotz
appliance and allows you to increase the space monitored by your NetBotz security and environmental
monitoring system. You can connect the NetBotz 150 to one of the following appliances: NetBotz Rack
Monitor 200 (NBRK0200), NetBotz Rack Monitor 450 (NBRK0450), NetBotz Room Monitor 455
(NBWL0455), or NetBotz Rack Monitor 550 (NBRK0550). The Rack Sensor Pod 150 cannot be used
with a NetBotz Room Monitor 355.
The NetBotz 150 includes six sensor ports for monitoring input from APC environmental sensors and
other third-party sensors. The total number of NetBotz 150s that you can use and the types of sensors
that can be used with the NetBotz 150 depends upon the specific appliance to which the NetBotz 150 is
connected. For details, see the installation and quick configuration manual included with your appliance.
Document overview
The NetBotz Rack Sensor Pod 150 Installation Manual describes how to install the NetBotz 150. For
details on connecting the NetBotz 150 to your appliance, see the installation and quick configuration
manual included with your appliance.
Additional documentation
Unless otherwise noted, the following documentation is available on the CD provided with the device or
on the applicable product page on the APC Web site, www.apc.com. To quickly find a product page,
enter the product name or part number in the Search field.
NetBotz Appliance User’s Guide – Includes all details for using, managing, and configuring a NetBotz
system with one of the following appliances: NetBotz Room Monitor 355 (NBWL0355, NBWL0356),
NetBotz Rack Monitor 450 (NBRK0450), NetBotz Room Monitor 455 (NBWL0455, NBWL0456), or
NetBotz Rack Monitor 550 (NBRK0550).
NetBotz Rack Monitor 200 User’s Guide – Includes all details for using, managing, and configuring the
system when using a NetBotz Rack Monitor 200 (NBRK0200).
NetBotz Rack Sensor Pod 150 Installation Manual
1
Additional options
The following options are available for the NetBotz 150. Some options may not be supported by each
rack or room monitor to which the NetBotz 150 can be connected. See the options listed in the
installation instructions included with your rack or room monitor. For more information about any of the
options, contact your APC representative or the distributor from whom you purchased your APC
product.
• Temperature Sensor (AP9335T)
• Temperature/Humidity Sensor (AP9335TH)
• NetBotz Spot Fluid Sensor (NBES0301)
• NetBotz Smoke Sensor (NBES0307)
• NetBotz Vibration Sensor (NBES0306)
• NetBotz Door Switch Sensor for APC Racks (NBES0303)
• NetBotz Door Switch Sensor for Rooms or Third Party Racks (NBES0302)
• NetBotz Dry Contact Cable (NBES0304)
• NetBotz 0-5 V Sensor Cable (NBES0305)
• Power Supply 100-230 VAC/24 VDC (AP9505i)
InfraStruXure-certified
This product is certified for use in APC InfraStruXure® systems.
2
NetBotz Rack Sensor Pod 150 Installation Manual
Physical Description
Rear
Toolless mounting pegs allow for installation in APC NetShelter® VX and SX racks and enclosures
without using any U-spaces. (For more details, see “Toolless peg-mount installation” on page 5.)
Front
Item
Description

24 VDC Input

A-Link ports
• Top port in
• Bottom port out

Identifier # LED display
Provides supplemental power for high-current load configurations.
Supplemental power is not required for most system configurations.
See the installation instructions for your appliance to determine
whether supplemental power is required.
Used for connecting the NetBotz 150 to a NetBotz Rack Monitor 200
(NBRK0200), NetBotz Rack Monitor 450 (NBRK0450), NetBotz
Room Monitor 455 (NBWL0455), or NetBotz Rack Monitor 550
(NBRK0550). Standard CAT-5 cabling with straight-through wiring is
required. Depending on the rack or room monitor to which the
NetBotz 150 is connected, multiple devices may be cascaded along an
A-Link bus.
Displays a unique identifier number. The first time a Rack Sensor
Pod 150 receives power, it obtains a unique Identifier #.
When the NetBotz 150 is connected to a NetBotz Rack Monitor 450
(NBRK0450), NetBotz Room Monitor 455 (NBWL0455), or NetBotz
Rack Monitor 550 (NBRK0550), the Identifier # LED will blink when
an alert occurs for the NetBotz 150.

Sensor ports
During a firmware upgrade, the Identifier # LED displays 88. (See
“Upgrade the NetBotz 150” on page 7 for more information on
firmware upgrades.)
Used for connecting APC sensors, third-party dry contact sensors, and
standard third-party 0-5 V sensors. (See “Additional options” on
page 2 for details on APC sensor options.)
Third-party dry contact sensors require the NetBotz Dry Contact
Cable (NBES0304). Standard third-party 0-5 V sensors require the
NetBotz 0-5 V Sensor Cable (NBES0305).
NetBotz Rack Sensor Pod 150 Installation Manual
3
Inventory
Inspect the contents of the package to ensure that the parts included match those shown below. Report
missing or damaged contents to APC or your APC reseller. However, if damage was due to shipping,
immediately report the damage to the shipping agent.
The shipping and packaging materials are recyclable. Please save them for later use or dispose
of them appropriately.
Item




4
Description
NetBotz Rack Sensor Pod 150
Brackets for a standard 19-in rack
8-32 x 1/4-in Phillips head screws
A-Link terminator
Temperature/Humidity Sensor (AP9335TH)—not shown
NetBotz Rack Sensor Pod 150 Installation Manual
Install the NetBotz 150
Choose the option below that meets your needs. Then connect the NetBotz 150 to your appliance by
following the instructions in the installation and quick configuration manual included with the appliance.
Note: Install the NetBotz 150 in an environment compatible with the environmental
specifications on page 8.
Note: When you install the NetBotz 150 in the rack, do not create a hazardous condition due
to uneven mechanical loading. For example, do not use the NetBotz 150 as a shelf.
Toolless peg-mount installation
Note: The toolless peg-mount installation is only available
with a NetShelter VX or SX rack.
In the left or right cable channel in the rear panel of the enclosure,
install the NetBotz 150 in a set of mounting holes. Be sure to push
down until it locks.
NetBotz Rack Sensor Pod 150 Installation Manual
5
Rack-mount installation
1. Choose a location for the NetBotz 150 in the front or rear of the rack. The
NetBotz 150 occupies one U-space. A notched hole or a number on the
vertical rail of the rack denotes the middle of a U-space.
Note: To avoid equipment damage, use only the hardware
provided when installing the brackets.
2. Install the brackets on each end of the
NetBotz 150.
3. Secure the NetBotz 150 to the rack, using
cage nuts and screws (provided with the
rack).
6
NetBotz Rack Sensor Pod 150 Installation Manual
Connect Sensors
Only connect sensors supported by the appliance to which the NetBotz 150 is connected. See the
installation and quick configuration manual included with your appliance.
Caution: Only connect approved devices to ports on the NetBotz 150 as directed in this
manual. Plugging in other devices may result in equipment damage.
Connect APC and third-party sensors to the six ports labeled Sensors on the NetBotz 150.
• Third-party dry contact sensors require the NetBotz Dry Contact Cable (NBES0304). To connect
a sensor to the cable, follow the instructions provided with the sensor and the instructions
provided with the cable.
• Standard third-party 0-5 V sensors require the NetBotz 0-5 V Sensor Cable (NBES0305). To
connect a sensor to the cable, follow the instructions provided with the sensor and the instructions
provided with the cable.
• If a sensor cable is not long enough, use an RJ-45 coupling (provided with some sensors) and
standard CAT-5 cabling to extend the cable up to 15 m (50 ft) for a Temperature/Humidity Sensor
(AP9335TH) or a Temperature Sensor (AP9335T) and up to 30.5 m (100 ft) for all other
supported sensors.
Configure and Monitor Sensors
Once your system is installed and receiving power, configure sensors and begin monitoring your system
using the software interface for the appliance.
See your appliance installation and quick configuration manual for system installation details
and for instructions on accessing the software interface of the appliance.
Upgrade the NetBotz 150
Firmware upgrades for NetBotz 150s are included with firmware upgrades for NetBotz appliances.
When you upgrade firmware for the appliance to which the NetBotz 150 is connected, the NetBotz 150
firmware will be updated automatically, if required.
Note: The NetBotz 150 Identifier # LED shows 88 during a firmware upgrade. During the
upgrade, data from sensors connected to the NetBotz 150 will be invalid.
For more information on firmware upgrades, see your appliance user’s guide. For details on
how to access your appliance user’s guide, see “Additional documentation” on page 1.
Clean the NetBotz 150
To clean the device, gently wipe surfaces with a clean, dry cloth.
NetBotz Rack Sensor Pod 150 Installation Manual
7
Specifications
Electrical
Input voltage, nominal
24 VDC; 50–175 mA
Maximum total current draw
175 mA
Physical
Dimensions (H x W x D)
44.2 x 337.0 x 44.2 mm (1.74 x 13.25 x 1.74 in)
Shipping dimensions (H x W x D)
67 x 450 x 225 mm (2.6 x 17.8 x 8.9 in)
Weight
0.70 kg (1.50 lb)
Shipping weight
1.80 kg (4.00 lb)
Environmental
Elevation (above MSL)
Operating
Storage
0 to 3000 m (0 to 10,000 ft)
0 to 15 000 m (0 to 50,000 ft)
Temperature
Operating
Storage
0 to 45ºC (32 to 113°F)
–15 to 65°C (5 to 149°F)
Humidity
Operating
Storage
0 to 95%, non-condensing
0 to 95%, non-condensing
Compliance
Immunity/Emissions
8
CE, FCC Part 15 Class A, ICES-003 Class A,
VCCI Class A, EN 55022 Class A, EN 55024,
AS/NZS CISPR 22
NetBotz Rack Sensor Pod 150 Installation Manual
Two-Year Factory Warranty
This warranty applies only to the products you purchase for your use in accordance with this manual.
Terms of warranty
APC warrants its products to be free from defects in materials and workmanship for a period of two
years from the date of purchase. APC will repair or replace defective products covered by this warranty.
This warranty does not apply to equipment that has been damaged by accident, negligence or
misapplication or has been altered or modified in any way. Repair or replacement of a defective product
or part thereof does not extend the original warranty period. Any parts furnished under this warranty may
be new or factory-remanufactured.
Non-transferable warranty
This warranty extends only to the original purchaser who must have properly registered the product. The
product may be registered at the APC Web site, www.apc.com.
Exclusions
APC shall not be liable under the warranty if its testing and examination disclose that the alleged defect
in the product does not exist or was caused by end user’s or any third person’s misuse, negligence,
improper installation or testing. Further, APC shall not be liable under the warranty for unauthorized
attempts to repair or modify wrong or inadequate electrical voltage or connection, inappropriate on-site
operation conditions, corrosive atmosphere, repair, installation, exposure to the elements, Acts of God,
fire, theft, or installation contrary to APC recommendations or specifications or in any event if the APC
serial number has been altered, defaced, or removed, or any other cause beyond the range of the intended
use.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, BY OPERATION OF LAW OR
OTHERWISE, OF PRODUCTS SOLD, SERVICED OR FURNISHED UNDER THIS
AGREEMENT OR IN CONNECTION HEREWITH. APC DISCLAIMS ALL IMPLIED
WARRANTIES OF MERCHANTABILITY, SATISFACTION AND FITNESS FOR A
PARTICULAR PURPOSE. APC EXPRESS WARRANTIES WILL NOT BE ENLARGED,
DIMINISHED, OR AFFECTED BY AND NO OBLIGATION OR LIABILITY WILL ARISE
OUT OF, APC RENDERING OF TECHNICAL OR OTHER ADVICE OR SERVICE IN
CONNECTION WITH THE PRODUCTS. THE FOREGOING WARRANTIES AND
REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES AND
REMEDIES. THE WARRANTIES SET FORTH ABOVE CONSTITUTE APC’S SOLE
LIABILITY AND PURCHASER’S EXCLUSIVE REMEDY FOR ANY BREACH OF SUCH
WARRANTIES. APC WARRANTIES EXTEND ONLY TO PURCHASER AND ARE NOT
EXTENDED TO ANY THIRD PARTIES.
NetBotz Rack Sensor Pod 150 Installation Manual
9
IN NO EVENT SHALL APC, ITS OFFICERS, DIRECTORS, AFFILIATES OR EMPLOYEES
BE LIABLE FOR ANY FORM OF INDIRECT, SPECIAL, CONSEQUENTIAL OR PUNITIVE
DAMAGES, ARISING OUT OF THE USE, SERVICE OR INSTALLATION, OF THE
PRODUCTS, WHETHER SUCH DAMAGES ARISE IN CONTRACT OR TORT,
IRRESPECTIVE OF FAULT, NEGLIGENCE OR STRICT LIABILITY OR WHETHER APC
HAS BEEN ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES.
SPECIFICALLY, APC IS NOT LIABLE FOR ANY COSTS, SUCH AS LOST PROFITS OR
REVENUE, LOSS OF EQUIPMENT, LOSS OF USE OF EQUIPMENT, LOSS OF SOFTWARE,
LOSS OF DATA, COSTS OF SUBSTITUENTS, CLAIMS BY THIRD PARTIES, OR
OTHERWISE.
NO SALESMAN, EMPLOYEE OR AGENT OF APC IS AUTHORIZED TO ADD TO OR VARY
THE TERMS OF THIS WARRANTY. WARRANTY TERMS MAY BE MODIFIED, IF AT ALL,
ONLY IN WRITING SIGNED BY AN APC OFFICER AND LEGAL DEPARTMENT.
Warranty claims
Customers with warranty claims issues may access the APC customer support network through the
Support page of the APC Web site, www.apc.com/support. Select your country from the country
selection pull-down menu at the top of the Web page. Select the Support tab to obtain contact
information for customer support in your region.
Obtaining service
To obtain support for problems with your NetBotz Rack Sensor Pod 150:
1. Note the serial number. The serial number is printed on a label located on the bottom of the unit.
2. Contact Customer Support using the information on the back cover of this manual. A technician
will try to help you solve the problem by phone.
3. If you must return the product, the technician will give you a return material authorization
(RMA) number. If the warranty expired, you will be charged for repair or replacement.
4. Pack the unit carefully. The warranty does not cover damage sustained in transit. Enclose a letter
with your name, address, RMA number and daytime phone number; a copy of the sales receipt;
and a check as payment, if applicable.
5. Mark the RMA number clearly on the outside of the shipping carton.
6. Ship by insured, prepaid carrier to the address provided by the Customer Support technician.
10
NetBotz Rack Sensor Pod 150 Installation Manual
Radio Frequency Interference
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
USA — FCC
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with this user manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference. The user will bear sole
responsibility for correcting such interference.
Canada — ICES
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Japan— VCCI
This is a Class A product based on the standard of the Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). If this equipment is used in a domestic environment,
radio disturbance may occur, in which case, the user may be required to take corrective actions.
この装置は、情報処理装置等電波障害自主規制協議会（VCCI）の基準
に基づくクラス A 情報技術装置です。この装置を家庭環境で使用すると、電波
妨害を引き起こすことがあります。この場合には、使用者が適切な対策を講ず
るように要求されることがあります。
Taiwan—BSMI
警告使用者 :
這是甲類的資訊產品 , 在居住的
環境中使用時 , 可能會造成射頻
干擾 , 在這種情況下 , 使用者會
被要求採取某些適當的對策。
Australia and New Zealand
Attention: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
European Union
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC
on the approximation of the laws of the Member States relating to electromagnetic compatibility. APC
cannot accept responsibility for any failure to satisfy the protection requirements resulting from an
unapproved modification of the product.
This product has been tested and found to comply with the limits for Class A Information Technology
Equipment according to CISPR 22/European Standard EN 55022. The limits for Class A equipment
were derived for commercial and industrial environments to provide a reasonable protection against
interference with licensed communication equipment.
Attention: This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
APC Worldwide Customer Support
Customer support for this or any other APC product is available at no charge in any of the following ways:
• Visit the APC Web site to access documents in the APC Knowledge Base and to submit customer
support requests.
– www.apc.com (Corporate Headquarters)
Connect to localized APC Web sites for specific countries, each of which provides customer support
information.
– www.apc.com/support/
Global support searching APC Knowledge Base and using e-support.
• Contact the APC Customer Support Center by telephone or e-mail.
– Local, country-specific centers: go to www.apc.com/support/contact for contact information.
For information on how to obtain local customer support, contact the APC representative or other distributors
from whom you purchased your APC product.
Entire contents copyright 2008 American Power Conversion Corporation. All rights reserved. Reproduction
in whole or in part without permission is prohibited. APC, the APC logo, InfraStruXure, NetBotz, and
NetShelter are trademarks of American Power Conversion Corporation. All other trademarks, product
names, and corporate names are the property of their respective owners and are used for informational
purposes only.
990-3285A-001
*990-3285A-001*
8/2008