Download INSTALLATION INSTRUCTIONS

I N T E G R AT E D I N S T A L L AT I O N S P E C I F I C A T I O N S
OVERALL DIMENSIONS
Models 700TR, 700TF(I) and 700TC(I)
27"
24"
(686)
(UNIT DIMENSION)
(610)
(UNIT DIMENSION)
TOP OF
ROUGH
OPENING
14"(356)
TALL UNITS
13/16"
27" (686) Wide Units
(21)
24"
Model 700TR
All Refrigerator
(610)
DOOR
MOUNTING
DETAIL
DOOR / DRAWER
CLOSED
Model 700TF
All Freezer
Model 700TFI
All Freezer
with Ice Maker
Model 700TC
Refrigerator | Freezer
Model 700TCI
Refrigerator | Freezer
with Ice Maker
DOOR / DRAWER
CLOSED
80"*
(2032)
19 1/2"*
25 1/2"* (495)
90˚
3/8"
789/16"*
(10)
(1995)
105˚
(648)
25 7/8" (657)
131/4"
1/2" (337)
(13)
DRAWER
MOUNTING DETAIL
4 5/8"* (117)
90˚ DOOR OPENING
341/2"*
101/4"
MAXIMUM DOOR OPENING
TOP VIEW
(876)
*DOOR/DRAWER PANEL THICKNESS NOT INCLUDED – DIMENSION WILL VARY WITH INSTALLATION
(260)
203/8"
93/4"
(518)
(248)
S P E C I F I C AT I O N S
4"
FRONT VIEW
Overall Dimensions
Width
SIDE VIEW
(102)
*1/2" (13) +_ ADJUSTMENT IN LEVELING LEGS
27" (686)
Height 80" (2032)
I N S TA L L AT I O N
Depth
Models 700TR, 700TF(I) and 700TC(I)
24" (610)
TOP VIEW
11/2"
Finished Opening
Width
27" (686)
Models without an ice maker will not
require the water line connection.
(38)
6"
ANTI-TIP
BRACKET*
(152)
13 1/2"
25"
27"
(343)
(635)
Height 80" (2032)
Depth
TOP VIEW
15 1/2"
9"
(394)
(229)
(686)
*The depth of the unit
is 24" (610) from the
front of the unit to its
back. Your design may
necessitate moving the
unit back or cabinets
forward to achieve a
flush fit. This will
require a minimum
rough opening depth
of 25" (635).
*PLACEMENT OF THE
ANTI-TIP BRACKET
SHOULD BE 24" (610)
FROM THE FRONT OF THE
UNIT WITHOUT PANELS
TO THE BACK OF THE
ANTI-TIP BRACKET.
27"
(343)
(686)
WATER LINE
SIDE ENTRY
LOCATIONS
WATER LINE
BOTTOM ENTRY
LOCATION
25" (635)*
ANTI-TIP
BRACKET
13 1/2"
11/2"
11/2"
(38)
(38)
27"
25"
(686)
(635)
LOCATE ELECTRICAL WITHIN
SHADED AREA – ORIENT GROUND
PRONG TO RIGHT AS SHOWN
ANTI-TIP
BRACKET
LOCATE WATER LINE
(REAR ENTRY) WITHIN
SHADED AREA
4 1/2"
(114)
80"
(2032)
3"
(76)
1/4"
(6)
13" (330)
9"
(229)
2 1/2" (64)
3/4"
(19)
15 1/2" (394)
NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO
PREVENT UNIT FROM TIPPING FORWARD
4
ANTI-TIP
BRACKET
FRONT VIEW
SIDE VIEW
WATER LINE
SIDE ENTRY
LOCATION