Download INSTALLATION INSTRUCTIONS

I N T E G R AT E D I N S T A L L AT I O N S P E C I F I C A T I O N S
OVERALL DIMENSIONS
Models 700BR, 700BF(I) and 700BC(I)
3/8"
27"
24"
(686)
(UNIT DIMENSION)
(610)
(UNIT DIMENSION)
(10)
BASE UNITS
Model 700BR
All Refrigerator
Model 700BF
All Freezer
Model 700BFI
All Freezer
with Ice Maker
131/4"
1/2" (337)
(13)
DRAWER
MOUNTING DETAIL
24"
(610)
341/2"*
101/4"
(876)
DRAWER CLOSED
(260)
203/8"
93/4"
(518)
(248)
(495)
FRONT VIEW
Model 700BC
Refrigerator | Freezer
191/2"*
4"
SIDE VIEW
(102)
*1/2" (13) +_ ADJUSTMENT IN LEVELING LEGS
257/8" (657)
Model 700BCI
Refrigerator | Freezer
with Ice Maker
TOP VIEW
*DRAWER PANEL THICKNESS NOT INCLUDED
S P E C I F I C AT I O N S
Overall Dimensions
Width
27" (686)
Height 34 1/2" (876)
Depth
24" (610)
TOP VIEW
I N S TA L L AT I O N
TOP VIEW
Models 700BR, 700BF(I) and 700BC(I)
Finished Opening
Width
27" (686)
Height 34 1/2" (876)
Depth
11/2"
(38)
Models without an ice maker
will not require the water line
connection.
6"
ANTI-TIP
BRACKET*
(152)
13 1/2"
25"
27"
(343)
(635)
25" (635)*
15 1/2"
9"
(394)
(229)
*PLACEMENT OF THE
ANTI-TIP BRACKET
SHOULD BE 24" (610)
FROM THE FRONT OF THE
UNIT WITHOUT PANELS
TO THE BACK OF THE
ANTI-TIP BRACKET.
27"
(343)
(686)
WATER LINE
SIDE ENTRY
LOCATIONS
WATER LINE
BOTTOM ENTRY
LOCATION
*The depth of the unit
is 24" (610) from the
front of the unit to its
back. Your design may
necessitate moving the
unit back or cabinets
forward to achieve a
flush fit. This will
require a minimum
rough opening depth
of 25" (635).
11/2"
11/2"
(38)
(38)
27"
25"
(686)
(635)
341/2"
(876)
NOTE: ANTI-TIP BRACKET MUST BE INSTALLED TO
PREVENT UNIT FROM TIPPING FORWARD
ANTI-TIP
BRACKET
FRONT VIEW
LOCATE ELECTRICAL WITHIN
SHADED AREA – ORIENT GROUND
PRONG TO RIGHT AS SHOWN
ANTI-TIP
BRACKET
LOCATE WATER LINE
(REAR ENTRY) WITHIN
SHADED AREA
4 1/2"
3"
(114)
(76)
1/4"
(6)
13" (330)
9"
(229)
2 1/2" (64)
15 1/2" (394)
6
(686)
ANTI-TIP
BRACKET
13 1/2"
3/4"
(19)
SIDE VIEW
WATER LINE
SIDE ENTRY
LOCATION