Download CompleteView™ Camera Supplement
Transcript
Recommended Bit Rates Compression Frame Rate 25 - 30 15 - 20 H.264 8 - 10 2- 5 25 - 30 15 - 20 MPEG4 8 - 10 2- 5 Low Activity Resolution VGA/D1 720P/1.3MP 1080P/3MP 768k 2M 3M 512k 1.5M 2M 386k 1M 1.5M 256k 768k 1M 1M 3M 5M 768k 2M 4M 512k 1.5M 3M 386k 1M 2M Activity Level Normal Activity Resolution VGA/D1 720P/1.3MP 1080P/3MP 1M 3M 5M 768k 2M 4M 512k 1.5M 3M 386k 1M 2M 1.5M 4M 6M 1M 3M 5M 768k 2M 4M 512k 1.5M 3M Very High Activity or PTZ Tours Resolution VGA/D1 720P/1.3MP 1080P/3MP 2M 4M 6M 1.5M 3M 5M 1M 2M 4M 768k 1.5M 3M 3M 6M 8M 2M 4M 6M 1.5M 3M 4M 1M 2M 3M Configuring CompleteView Once the cameras are configured with the appropriate IP address and the camera settings are correct, launch the CompleteView System Configuration. 1. 2. 3. 4. 5. 6. 7. 8. Select Configure Servers Go to the Server Configuration menu On the drop down menu select Camera Then select Add Camera Enter the camera name Select from the camera model drop down menu the appropriate driver. Enter the IP address of the camera Select the Stream Type a. This is the codec mentioned in the Verifying Settings through the Web Interface 9. Enter the HTTP and RTSP port numbers 10. Enter the Username and Password a. These are the Administrator Name and Password for the Sony camera 11. Verify the image path Connecting with Camera Specific Driver Select the appropriate Sony model listed in the drop down menu under Camera Model. Enter the IP address of the camera and the username and password. Select the stream type being sent from the camera to CompleteView. If CompleteView Camera Supplement: Sony IP Cameras Page 6