Download Operating Instructions

Changing/
disabling
programme
positions (SLVEZ44AZ/EZ22AZ
only)
After setting the channels and G-CODE
guide channels, you can change the
programme positions as you like. If any
programme positions are unused or
contain unwanted channels, you can
disable them.
MENU
OK
M/m/</,
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
Changing programme positions
e.g. Moving the programme position from 2 to 0.
1
MENU
Press MENU, then press M/m to move the
cursor (B) to SET UP CH AND
G-CODE and press OK.
PLAY
OK
2
PLAY
OK
Press M/m to move the cursor (B) to the
row on which you want to change the
programme position, then press ,.
To display other pages for programme
positions 5 to 49 (for Australia) or 6 to 50
(for New Zealand), press M/m repeatedly.
26
Getting Started
e.g. COUNTRY is set to
AUS
SET UP CH AND G-CODE
GUIDE
PROG
CH
0
2
2
–
1
7
7
–
9
2
9
–
10
10
3
–
4
28
28
–
]
:[
SELECT
:[ ]
MOVE PROG
ERASE PROG : [ CLEAR ]
SET UP CH AND G-CODE
GUIDE
PROG
CH
0
2
2
–
1
7
7
–
[ 9
9 ]
2
–
3
10
10
–
4
28
28
–
]
:[
SELECT
SET GUIDE CH : [ ]
:[ ]
CONFIRM
CH
CH