Download software installation procedures for xdcam e

SOFTWARE INSTALLATION PROCEDURES FOR XDCAM
Section
Models
PDW-U1
15.1
15.2
15.3
15.4
16.1
17.1
18.1
19.1
20.1
20.2
20.3
20.4
21.1
21.2
PDW-V1
PDZ-1
PDZK-P1
PDZ-VX10
PMW-EX1/EX3/EX30
XDZ-P1
Software
U1 Utility (Sony XDCAM Driver Software)
U1 Utility
Firmware Package
PDW Terminal Service Tool
Package
Proxy Browser + FAM Driver
XDCAM Transfer + FAM Driver
XDCAM Viewer
Binary Package Loader
Binary Package
SxS PRO™ Device Driver
XDCAM EX Clip Browser
E-PDW-001-5
Upgrade Method
PC software
Mac software
USB cable
PC software
Ethernet
PC software
Mac software
PC software
PC software
USB cable
PC software
Mac software
PC software
Mac software
2 PDBK-101 : NETWORK BOARD
2.1 Applicable Models
The PDBK-101 Network Board can be installed in the following models:
!
!
!
!
!
PDW-70MD
PDW-75MD
PDW-F30
PDW-F70
PDW-F75
2.2 NET Software
Caution:
Do NOT turn off the power or disconnect the network cable during the upgrade.
Do NOT upgrade the software with a disc inserted in the unit.
Disconnect the i.Link, audio and headphone cables before upgrading the software. Noise may be
audible during the upgrade; this is normal.
Note:
For full compatibility, it is recommended that the latest versions of the following software are installed:
!
!
1.
PDZ-1 Proxy Browser + FAM Driver (Windows)
PDZK-P1 XDCAM Transfer + FAM Driver (Apple Mac)
Upgrade the software as described in Section 3-3 'Maintenance Menu' of the respective Service
Manual:
!
!
2.
PDW-F30/F70/70MD Service Manual, Volume 1, Edition 1, Revision 2 (part number
9-968-227-03)
PDW-F75/75MD Service Manual, Volume 1, Edition 1, Revision 1 (part number
9-968-379-02)
Confirm the software version as described in Section 3-2-3 'Software Version' of the Service
Manual.
2 of 21