Download HD Leeza - Key Digital
Transcript
HD LEEZATM, MODEL KD-HD1080P
KEY DIGITAL
TM
HD LEEZA
VIDEO PROCESSING FUNCTIONS
Brightness, contrast, and KD-PE (Key Digital Picture Enhancement) settings for R, G,
and B channels can be individually controlled. This is in addition to the preexisting
overall brightness, contrast, and KD-PE controls. Individual brightness settings are
remembered in EEPROM separately for each input channel. Individual contrast and
KD-PE also remembered in EEPROM, but as global settings only.
An RS232 command is provided to switch between daytime and nighttime viewing
conditions. This command changes overall brightness and overall contrast. Nighttime
settings are default.
An RS232 command is provided to turn film mode on or off. The film-mode should
normally be kept “on”.
Brightness and Contrast:
Use these controls to set the black level (brightness) and white level (contrast) of any video
input. It's helpful to have a calibration DVD on hand to supply the appropriate test patterns.
You can also find grayscale patterns under Menu selection #7.
Saturation:
Set color saturation with this menu. It's best to have a color bar test pattern and a standard
blue filter to make this adjustment. You can find this pattern under Menu selection #7.
Red and Blue Saturation:
RS232 commands are available to set blue and red saturation, to allow you to fine-tune red and
blue levels (adjustments are not available through the IR Remote Control OSD Menus). Use a
color bar test pattern and a blue filter to set correctly. To set blue_saturation, use
u<space>{0,1}<space>#. If the number following u is 0, blue_saturation will be set to a positive
number; if the number following u is 1, blue_saturation will be set to a negative number. The
legal range is -10 through 10. To set red_saturation, use e<space>{0,1}<space>#. Other
properties are as in the blue_sat case.
Edge Enhancement:
This function controls edge sharpness (peaking). Use it for lower-resolution sources such
as VHS tapes and cable TV programs. Higher-resolution sources typically do not need
edge enhancement.
Picture Aspect Ratio:
Your video source may send standard (4:3) aspect ratio or widescreen (16:9) aspect ratio
pictures to HD LeezaTM. Standard-size images are typical from VHS tapes and regular TV
programs, while widescreen images are more common with DVD players.
HD LeezaTM Operating Instruction Manual
Page 28