Download Catalog - veerasiamhardware
Transcript
Helpful accessories for model builders, jewelers, watchmakers... MICROFLAM Burner MFB/E – MICRO Screwdrivers with piezo lighter. Miniature screwdrivers for electronics, cameras, jewelry, mechanics and model builders. For soldering, removing alu solder, brazing, heating of work pieces, baking and tinning. Ideal for modelbuilding, electronics, jewelry design and repairs, dental laboratories, stained glass. The removable foot Each driver has a fixed place in the practical holder. May be used as desktop stand or attached to wall. Shafts of high alloy Nickel-Chrome-Molybdenum (SAE 8660) for maximum hardness and toughness. Chromed with brinelled tip. The ergonomically formed plastic handles are oil and impact resistant. The revolving top and finger mold improve ease of use. ensures stability on the worktop. Individually controllable gas and air supply. For finest flames and temperatures up to 2,192 °F/ 1,200 °C. The tank contents of 50cc is sufficient for approximately 60 minutes operation with normal flame. For safety reasons the torch is delivered without gas. NO 28 148 15 pieces in a stand Designated spot for each item in the practical holder. May be used as desktop stand or fixed to a wall. Slot: .04" x 1.6", .08" x 1.6", .12" x 1.6", (1.0 x 40, 2.0 x 40, 3.0 x 40,) Phillips: PH 0-3 x 1.6", PH 0 x 1.6", PH 1-2 x 1.6" (PH 0-3 x 40, PH 0 x 40, PH 1-2 x 40) Torx: T 5 x 1.6", T 6 x 1.6", T 8 x 1.6", T 10 x 1.6", T 15 x 1.6" (T 5 x 40, T 6 x 40, T 8 x 40, T 10 x 40, T 15 x 40) Allen key: 1.5 x 40, 2.0 x 40, 2.5 x 40, 3.0 x 40 (metric) NO 28 146 Universal Holder UHZ. Rotates in all directions. Made of die-cast zinc. Easily clamps to workbenches and tables of up to 2 3/8" (60mm). Alternatively, use 2 standard screws to secure to the work surface. Otherwise exactly as universal holder UHV. NO 28 610 UHZ Universal Holder UHV. With suction cap for rapid attachment on flat and smooth surfaces. UHV The ball joint may be swivelled in all directions. The 4/5" (20mm) bore accepts all MICROMOT drills and grinders, e.g. FBS 115/E, IB/E, MICROMOT 50, 50/E and 50/EF, FBS 12/EF. NO 28 603 21