Download PROFACE - LT3000 Series Catalog

Product Specifications
Hardware
LT-3300S/L
5.7"
QVGA
STN Color
Performance Specifications
Display Type
Display Colors/Shades
LT-3300S
Sink Output
Ethernet
Monochrome
Sink Output Model：LT3301-L1-D24-K
Monochrome
Source Output Model：LT3301-L1-D24-C
STN Color
Source Output
Ethernet
Model：LT3300-S1-D24-C
Sink Output
Ethernet
Model：LT3300-L1-D24-K
Monochrome
Source Output
Ethernet
Model：LT3300-L1-D24-C
General Specifications
LT-3301L
Monochrome LCD
Black and White (16 shades) (3-speed blink)
STN Color LCD
4,096 colors (3-speed blink)
Model：LT3300-S1-D24-K
Monochrome
LT-3300L
International Safety Standards
White LED (When replacement is required, contact your local distributor.)
Backlight
Conforming Standards
Display Resolution
Input Voltage
Rated Voltage
Effective Display Area
Brightness Control
Contrast Adjustment
8 levels of adjustment available via touch panel
Allowable Voltage
8 levels of adjustment available via touch panel
Power Consumption
Japanese: 6,962 (JIS Standards 1 & 2 including 607 non-kanji characters)
ANK:158 *1
Language Fonts
Stroke font: 6 to 127 dot fonts
dots
dots
dots
Touch Panel Type
Atmosphere
Air Pressure Resistance (Availment Altitude)
Noise Immunity
(via nose simulator)
Electrostatic Discharge Immunity
Grounding
IEEE802.3u 10BASE-T/100BASE-TX
Ratings
−
RS-232C / 422 / 485, Asynchronous Transmission, Data Length: 8 bit / 7 bit
Stop Bit: 2 bit / 1 bit, Parity: Even / Odd / None,
Data Transmission Speed: 2400bps-115.2kbps Connector: D-Sub 9pin plug
Serial
Interface
Vibration Resistance
FLASH EPROM 132KB *5
15,000 steps *6
Number of Step
Ethernet
USB 1.1 Connector: Type A x 1, Power Supply Voltage: DC5V 5%,
Output Current: 500mA (max.), Communication Distance: 5m (max.)
USB
DIO (Sink Type)
Sink / Source Input: 16 points, Sink Output: 16 points
Connector: 38 pins
Control
(DIO) DIO (Source Type)
Sink / Source Input: 16 points, Source Output: 16 points
Connector: 38 pins
To mount EX Module *7
EX Module (EXT1)
AUX / Expansion Unit (EXT2)
*8
Pollution Degree
SRAM 128KB *4
SRAM 64KB *4
Backup Memory
Variable Area
Control Memory
Program Area
Rated Voltage
Allowable Voltage
Sink Output
Output Method
Source Output
Maximum Load Voltage
Minimum Load Current
Output Voltage Drop
OFF to ON
Output Delay Time
ON to OFF
Voltage Leakage (When OFF)
Clamp Voltage
Type of Output
Common Lines
Common Design
External Connection
Output Protection Type
Internal Fuse
Surge Control Circuit
Output Points
Output Signal Display
Isolation Method
External Power Supply
Humidity
FLASH EPROM 6MB *3
Internal Memory
To mount CANopen Master Unit *7
DC24V
External
Power Supply
Internal Circuit
Dotted area indicates the cable diagram with sink output type devices.
[Output Circuit]
(Sink Type)
External Dimensions
Weight
*1 Korean, Simplified Chinese, Traditional Chinese, Cyrillic and Thai character support. For more
information, see the operation environment for GP-Pro EX.
*2 Using the software, you can resize characters.
*3 User area.
o
*4 Service life of a lithium battery is 10 years or more at a battery ambient temperature of 40 C or less,
o
o
4.1 years or more at 50 C or les, or 1.5 years at 60 C or less. The backup period is about 100 days after
the initial charge (fully charged), and about 6 days up to the end of battery life.
*5 Using Pro-face s Step counting method.
*6 Up to 60,000 steps can be made, but this reduces the capacity of the internal screen data memory by 1MB.
*7 EX Module and CANopen Master Unit cannot be used at the same time.
*8 Temperature in and around the panel. For STN color models, extended use in environments where the
o
surrounding air temperature is 40 C or higher may degrade the display quality and could result in
decreased contrast.
*9 Confirmed compatibility under conditions. This does not guarantee compatibility for all environments.
0.5ms or less (with output DC24V, 200mA)
0.5ms or less (with output DC24V, 200mA)
Internal circuit
*For faster response with light load use an external dummy resistance.
[Output Circuit]
Input Points
Internal circuit
77.6 [3.06]
5 [0.19]
+0.04
]
156.0 +1
- 0 [6.14 - 0
Allowable Panel Thickness:
1.6 [0.06] to 5.0 [0.20]
Internal circuit
Pulse Catch
DC24V
Open Collector
Internal circuit
IN0, IN2,
IN4, IN6
* For faster response with light load use an external dummy resistance.
User Defined
User Defined
Input signal ON width
Pin Connection
39
[1.54]
t
t
90 degree phase differential 2-phase signal /
1 Phase
1-phase +directional signal
50Kpps
100Kpps
Not Available
Available
32-bit UP / DOWN Counter
Set through software
Not Available
Available
IN3,IN7
None
Depending on type of connection cable used the dimensions shown above will change.
The dimensions given here are representative values and are intended for reference only.
Output Points
Load Voltage
Minimum Load Current
Maximum Output Frequency
Pulse Acceleration
ON Duty
B1
−
−
−
−
−
−
−
−
A10
A11
A19
4 points
PLS0 to PLS3 (OUT0 to OUT3) PWM0 to PWM3 (OUT0 to OUT3)
User Defined
User Defined
DC24V
1mA
Max.65kHz（set through software）Varies depending on the number of CH of High-speed counter, pulse output
Not Available
Available
19 to 81% (at 65kHz)*12
50% 10% (at 65kHz)*11
［System Structure］
B19
(Cable side)
A12
A13
A14
A15
A16
A17
A18
A19
Signal Name
IN1
IN3
IN5
IN7
IN9
IN11
IN13
IN15
NC
Sink output type: NC
Source output type: +24V
Sink output type: 0V
Source output type: NC
OUT1 (PLS1, PWM1)
OUT3 (PLS3, PWM3)
OUT5
OUT7
OUT9
OUT11
OUT13
OUT15
Pin No. Signal Name
B1
IN0 (CT0)
B2
IN2 (CT1)
B3
IN4 (CT2)
B4
IN6 (CT3)
B5
IN8
B6
IN10
B7
IN12
B8
IN14
B9
COM
Sink output type: +24V
B10
Source output type: +24V
Sink output type: 0V
B11
Source output type: 0V
B12
OUT0 (PLS0, PWM0)
B13
OUT2 (PLS2, PWM2)
B14
OUT4
B15
OUT6
B16
OUT8
B17
OUT10
B18
OUT12
B19
OUT14
*10 Digital filter can be set intervals of 0.5ms.
*11 The ON duty error (10%) reduces as the output frequency setting is lower.
*12 ON duty (effective range) increases as the output frequency setting is lower.
[Editor Environment]
USB Interface
Barcode Reader*1
(Commercial type)
Ethernet Interface
DIO Interface
USB Storage *1
Hub
(Commercial type)
PC
(Commerciall type)
USB-IEEE1284
Conversion cable
(Commercial type)
Serial Interface
DIO Cable
PC
(Commercial type)
Various I/O devices,
indication lights,
LED sensors,
switches, etc.
CA5-USBEXT-01
USB Hub
(Commercial type)
RS422 Cable (5m)
Temperature
Contoller
Various boards*1
Barcode Reader*1
(Commercial type)
COM Pot Conversion Connector Terminal Block
Adapter
Conversion Adapter
USB Interface
EX Module
(max. 3 units)
Modem *1
USB Transfer Cable
CA3-USBCB-01
AUX/Expansion Unit Interface (EXT2)
RS422 Cable
(Prepared by the user)
CA3-ADPCOM-01 CA3-ADPTRM-01
For Isolation Unit, see manuals for system diagrams.
CANopen Master Unit
Screen Creation Software
GP-Pro EX
*2
CA3-CBL232/5M-01
CA3-CBL422/5M-01
USB Front Cable
*Except for LT-3301L
(Prepared by the user)
RS-232C Cable (5m)
(Commercial type)
Ethernet Interface
CA7-DIOCN5-01
(Commercial
type)
FP-US00 or commercial type
CA6-USB232-01
DIO Connector
(included in the package)
EX Module Interface (EXT1)
Printer *1
USB Cable
USB-Serial (RS-232C) Conversion Cable
Various I/O devices,
indication lights,
LED sensors,
switches, etc.
*Except for LT-3301L
(Commercial type)
07
A1
A2
A3
A4
A5
A6
A7
A8
A9
−
PWM
Pulse
Output Method
LT-3301L does not support Ethernet Interface.
LT-3301L does not support Ethernet Interface.
The maximum thickness when three EX modules are
connected:123.0mm [4.84in.].
Pin No.
Minimum Pulse Width
(Pulse Input)
Pulse/PWM Output Specifications
63 [2.48]
64 [2.52]
AUX / Expansion Unit (EXT2)
Interface
USB(host)Interface
Serial Interface
31 [1.22]
98 [3.86]
144.6 [5.70]
DIO Interface
Ethernet Interface
4/R3 [0.12]
or less
123.5 +1
-0 [4.86]
EX Module (EXT1)
Interface
134.6 [5.30]
123 [4.84]
Display/ Touch Panel
135 [5.31]
167.4 [6.59]
OUT0 to 3 only
Dummy Resistance*
Fuse
3.5A
User Defined
Phase
High Speed Count Frequency
Count Edge Designation
Count Register
Counter Mode Change
Upper/Lower Limit Settings
Preload/Prestrobe
Marker Input (Clear Counter Value)
Unit: mm [in.]
DC24V
External
Power Supply
Internal circuit
(Rise, Fall Time)
[Cable Attached Dimensions]
Unit: mm [in.]
Fuse
3.5A
(Source Type)
High-speed Counter
DC24V Open Collector
Double phase (1 or 2 points)
Single phase (4 points)
Use CT0 (IN0),
CT0 (IN0),
CT1 (IN2) in pairs.
CT1 (IN2),
CT0:
Phase
A, CT1: Phase B
CT2 (IN4),
CT2 (IN4), CT3 (IN6) in pairs.
CT3 (IN6),
CT2: Phase A, CT3: Phase B
Input
OUT0 to 3 only
Dummy Resistance*
1mA (Pulse/PWM Output Unavailable)
High-speed Counter / Pulse Catch Input Specifications
Cooling Method
[Panel Cut-Out]
DC24V
External
Power Supply
Fuse
3.5A
Internal circuit
A1
Unit: mm [in.]
Fuse 3.5A
Internal circuit
Count Speed
[External Dimensions/Interfaces]
Internal Circuit
OUT4 to OUT15
Storage Temperature
Storage Humidity
Touch Panel Resolution
[Input Circuit]
Internal circuit
Surrounding Air Temperature
Standard font: Increase Width and Height up to 8 times. *2
40 char. x 30 rows
40 char. x 15 rows
20 char. x 15 rows
10 char. x 7 rows
Resistive Film (Analog)
Font Sizes
dots
Rated Voltage
DC24V
Maximum Allowable Voltage
DC28.8V
Input Method
Sink / Source Input
Rated Current
6.5mA (DC24V) (IN0, IN2, IN4, IN6) 4.1mA (DC24V) (Other inputs ）
Input Resistance
Approx.3.7k (IN0, IN2, IN4, IN6) Approx.5.9k (Other inputs)
Input Points
16
Common Lines
1
Common Design
16 points / 1 common line
ON Voltage
DC19V or more
Operation Range
OFF Voltage
DC5V or less
OFF to ON
0.5 to 20ms *10
Input Delay Time
ON to OFF
0.5 to 20ms *10
Input Signal Display
No LED indicators
Isolation Method
Photocoupler Isolation
External Connection
38-pin connector (used with Output section)
External Power Supply
For Signal: DC24V
Output Specifications
Voltage Endurance
Insulation Resistance
dot
Character Sizes
Text
Input Specifications
LT-3301L
*2
Transfer Cable
(CANopen standards)
Commercial type
Slave Unit
for CANopen *1
*1 For supported models, refer to Pro-face’s support site "Otasuke Pro!"(http://www.pro-face.com/otasuke/).
USB Storage
With the memory loader tool,the screens can be
transferred via USB storage.
(Commercial type)*1
*2 EX Module and Expansion unit cannot be used at the same time.
08