Download EMCO WinNC SINUMERIK 810/820 M Software Description

EMCO WINNC SINUMERIK 810/820 M
PROGRAMMING
G80 Delete G81 bis G89
G81 Call Cycle L81
G82 Call Cycle L82
G83 Call Cycle L83
G84 Call Cycle L84
G85 Call Cycle L85
G86 Call Cycle L86
G87 Call Cycle L87
G88 Call Cycle L88
G89 Call Cycle L89
With G81 - G89 the cycles L81 - L89 will be called up.
With the call up by a G command the cycles are
modal, that means the cycles will be proceeded after
every traverse movement, until they will be cancelled
with G80.
Explanations see L81 - L89.
G90 Absolute Programming
Format
N... G90
Notes
• Direct switchover within a block between G90 and
G91 is not permitted.
• G90 and G91 may also be programmed with some
other G functions
(N... G90 G00 X... Z...).
G91 Incremental Programming
Format
N... G91
Notes see G90.
D 13