Download Mt3 Series

OPERATION
Media Loading
The printer can print text, bar codes and some limited graphics on thermal
receipt paper. See “Media Specifications” for the width, thickness requirements
and approved vendors.
Follow these steps to load printer paper:
1.
Open the paper supply cover by placing your fingers under the “T”
pull lever and pulling up firmly on the supply cover until the lever
stops moving.
Note:
Do not pull too hard. Use enough force to allow the cover
to unlock and lift freely
2.
Place the paper supply roll into the paper supply well. Make sure the
paper supply unwinds from the bottom as shown.
3.
Position the paper supply between the print head guides.
7