Download Chapter 4 Explanation of function
Transcript
N300-P INSTRUCTION MANUAL Chapter 4 Explanation of function Relation code Acceleration and deceleration pattern A097 : Acceleration pattern selection A098 : Deceleration pattern selection A131 : Acceleration curve constant A132 : Deceleration curve constant (1) Selection of pattern Pattern of acceleration and deceleration speed is possible to set up corresponding to each system. Select the pattern of acceleration and deceleration with A097 and A098. set value 00 curve Line 02 Sigmoid U-shape Output frequency Output frequency Contents time time Output frequency Output frequency time Accelerate and decelerate in line frequency set value Reverse U-shape Output frequency time time A098 (Deceleration) 03 Output frequency Output frequency Output frequency A097 (Acceleration) 01 time time time Collapsing the cargo such as the going up and down machine, conveyor it uses it for prevention Cutting the tension control, rolled book such as the volume collector machine it uses it for prevention It is possible to set the pattern of both acceleration, deceleration (2) The curve constant (the swelling degree) It makes the rough sketch reference and please decide the swelling degree. (100%) (100%) 96.9 82.4 99.6 93.8 87.5 68.4 64.6 10 Output frequency(Hz) Goal frequency Output frequency(Hz) Goal frequency Output frequency(Hz) Goal frequency 02 (100%) 10 65 02 35 17.6 3.1 50 02 10 12.5 6.25 02 10 25 35.4 31.6 75 Acceleration time to output frequency set value(100%) 0.39 10 time 25 50 75 Acceleration time to output frequency set value(100%) 25 50 75 Acceleration time to output frequency set value(100%) There is the range which the midway adjustable-speed time becomse fast in the S character parrtern. When An intelligent input terminal is allocated to LAD cancel (LAC) and the terminal is ON, output frequency is immediately controlled by Setup frequency.