Download AT-610 user manual

AT810 Series User Manual
5.3.4 NAT Support Parameters
A. Enable Stun: Whether to use stun to discover NAT mapping or not.
B. Stun Server: Stun server to contact for NAT mapping discovery.
5.4 Account
5.4.1 SIP
 Enable: Whether to enable this sip register or not.
 Display Name: The phone’s display name, it will be shown on the far end when dialing.
It will prefer to show the name set by the server if the server has set a name for
account. It will show the account instead if set the display name as blank.
 User ID: Set user ID for sip account.
 Authenticate ID: Normally is the same with User ID, can also leave it as blank.
 Password: Set password for sip account.
26
ATCOM TECHNOLOGY CO., LIMITED
www.atcom.cn