Download Operations Guide - CyberData Corporation
Transcript
Installing the VoIP V2 Loudspeaker Amplifier 18 Loudspeaker Amplifier Setup 2.2.10 Confirm Operation After connecting the Loudspeaker Amplifier to the ethernet hub, use the LEDs on the Loudspeaker Amplifier face to confirm that the Loudspeaker Amplifier is operational and linked to the network. Table 2-8. Loudspeaker Amplifier LEDs LED Color Function Power Blue/Green The power LED is illuminated a steady green when the power is on and in low power mode. The power LED is illuminated a steady blue when the amplifier is in high power mode. The power LED will blink during a boot up or a phone call. Status Green After supplying power to the Loudspeaker Amplifier, a steady LED confirms that the Loudspeaker Amplifier is operational. The status LED will blink during a page when it is online. Link Green/Yellow The Link LED is illuminated green for a 10Mb link or yellow/green for a 100Mb link when the network link to the Loudspeaker Amplifier is established. Activity Green The Activity LED blinks to indicate network traffic. Figure 2-17. Loudspeaker Amplifier LEDs—Power and Link Power LED (blue/green) Link LED (green/yellow) Figure 2-18. Loudspeaker Amplifier LEDs—Status and Activity Status LED (green) Activity LED (green)(yellow) Operations Guide 930362L CyberData Corporation