Download Operations Guide - CyberData Corporation

Transcript
Installing the VoIP V2 Loudspeaker Amplifier 18
Loudspeaker Amplifier Setup
2.2.10 Confirm Operation
After connecting the Loudspeaker Amplifier to the ethernet hub, use the LEDs on the Loudspeaker
Amplifier face to confirm that the Loudspeaker Amplifier is operational and linked to the network.
Table 2-8. Loudspeaker Amplifier LEDs
LED
Color
Function
Power
Blue/Green
The power LED is illuminated a steady green when the power is on and in
low power mode. The power LED is illuminated a steady blue when the
amplifier is in high power mode. The power LED will blink during a boot up or
a phone call.
Status
Green
After supplying power to the Loudspeaker Amplifier, a steady LED confirms
that the Loudspeaker Amplifier is operational. The status LED will blink
during a page when it is online.
Link
Green/Yellow
The Link LED is illuminated green for a 10Mb link or yellow/green for a
100Mb link when the network link to the Loudspeaker Amplifier is
established.
Activity
Green
The Activity LED blinks to indicate network traffic.
Figure 2-17. Loudspeaker Amplifier LEDs—Power and Link
Power LED (blue/green)
Link LED (green/yellow)
Figure 2-18. Loudspeaker Amplifier LEDs—Status and Activity
Status LED (green)
Activity LED
(green)(yellow)
Operations Guide
930362L
CyberData Corporation