Download Reference Guide - DOC. 6286A

Crestron UPX-2
Universal Presentation Processor
directly or may be edited with the Sound Recorder. For example, the individual files
can be combined to create custom messages.
NOTE: WAV files (for the UPX-2) can be obtained from the Sound Files section of
the Crestron FTP site (ftp://ftp.crestron.com/sound_files/).
NOTE: WAV files reside in the UPX-2’s Flash memory and will affect the amount
of available space for project screens.
For information on using WAV files in a UPX-2 project, refer to the VT Pro-e help
file.
Status Reports
A VT Pro-e project can be configured to report certain aspects of the UPX-2’s
operation to a SIMPL Windows program during runtime.
Open the “Project Properties” window and select the Status Report tab to specify
analog joins that will receive status reports from the UPX-2.
“Project Properties” Window, Status Report Tab
Select an analog join(s) as the destination(s) for information about the Ethernet
connection’s status, annotation process, screen capture progress, and other system
errors and/or warnings.
Analog values are defined in the following table.
Analog Output Definitions
SECTION
ANALOG VALUE DEFINITION
Connection
1: Ethernet network traffic slowdown
2: Ethernet connection re-established
Annotation
100: Session folder is valid
101: Session folder invalid
102: Session folder disk space sufficient
103: Session folder disk space full
Continued on following page
Reference Guide - DOC. 6286A
Universal Presentation Processor: UPX-2 • 27