Download NEW - Rute66

9GBC6?GJ(P?KC
overstock fork depending on the wheel
and tire size used. The rear section of
the frame is widened to accept extra
wide tires, including our new “Big Foot”
Avon 200 tire, in combination with final
chain drive. All mounts for side stand and
forward controls are welded in place.
Frames and swingarms are fully TigWelded for superior strength. Frame kits
come complete with frame, swingarm,
stainless swingarm pivot bolt with chrome
spacer and bearing kit, chrome rear
wheel axle and Stainless Steel protection
plates for swingarm, engine and shocks.
All parts are separately available. Fender
struts must be ordered separately.
ZODIAC’S “WIDE-TAIL” SOFTAIL
STYLE FRAME
A custom built frame should not only
look right but also handle well and
must withstand the most severe stress,
vibration and fatigue tests. It is also
normal practice that the engine and
transmission combination must fit in the
frame without grinding, drilling or any
other modification. You can be assured
that this frame is the best and nothing
but the best. For the Custom Builder that
likes a Softail with “Stretched Lowrider”
looks, this sleek design Softail frame has
it all. The Wide-Tail frame uses thick wall
tubing in some sections of the frame,
which drastically improves the strength
and roadholding without disturbing
the lines. To give that sleek, stretched
lowrider look, steering head is raked
to 38 degrees. This requires a 4” to 8”
may be used in combination with our TÜV
approved rear Swingarms and our TÜV
approved Ceriani front forks.
Note: Wide Tail frames with a different
rake are available on special order.
These special ordered frames have
the same quality features as the stock
frames but the design change will void
the TÜV approval. Special ordered
frames require a 50% deposit. There
is 6 to 8 weeks delivery time on those
frames from the time your down
payment is received. Ask your Zodiac
dealer for more details
Complete Wide-Tail frame kit
238760 Wide-Tail frame kit, TÜV
approved
Replacement kit parts
238761 Wide-Tail frame only
238762 Wide-Tail swingarm only
237653 Stainless pivot bolt with
chrome spacer
782023 Swingarm bearing (each)
237652 Rear axle with washers and
nut, chrome (395 mm)
238763 Stainless swingarm plate
238764 Engine protection plate
238765 Shocks protection plate
Optional parts
237999 Fender struts (raw steel)
Note: Zodiac Wide Tail frames are
approved by the Dutch R.D.W. and the
German TÜV as a replacement frame
for Harley-Davidson motorcycles, engine
capacity may not exceed 1740 cc, power
may not exceed 110 Horsepower. They
17-003