Download CS-1820 - HPI Technologies

2GM
(9) Adjusting the DP magnification
Adjust magnification in the auxiliary scanning direction if magnification is incorrect when the DP is used.
U065
(P. 1-6-44)
U070
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Start
Enter maintenance mode.
Enter 070 using
up/down cursor keys.
Original
Copy
example 1
Copy
example 2
Figure 1-6-60
Press the enter key.
Press the system menu/counter key.
Press the enter key.
The new setting is stored.
Place an original on the DP
and make a test copy.
(Printing cannot be stopped until the
preset number of sheets is printed.)
Is the image correct?
No
Press the system menu/counter key.
For copy example 1, increase the
value using the right cursor key.
For copy example 2, decrease the
value using the left cursor key.
Yes
Press the back key
to exit maintenance mode.
End
Setting range: -25 to +25
Initial setting: -2
Changing the value by 1 changes
the magnification by 0.1%.
Increase the value makes
the image longer, and decreasing it
make the image shorter.
1-6-49