Download Ethernet Remote I/O

Distributed Monitoring & Control Network
Ethernet Remote I/O
The simplest and Most Compact
Solution for On-site Computers
Analog I/O
Micro Controller
Digital I/O
Serial
Communication
This ultra-compact [94mm(H)×64.7mm(D)] Micro Controller
delivers the functions of a full size PC and runs on familiar
operating systems including Windows®, Linux and
GPIB
Communication
DOS.
Motion Controller
Industrial PC Catalog
Counter
USB Remote I/O
Allows Central Monitoring
and Control of Remote Devices
F&eIT Ethernet IO
I/O Controller
Bus Expansion
Accessories
By incorporating Ethernet and USB into the system's infrastructure,
you can easily configure a lead-free Remote I/O system that can then
be monitored and controlled from a central computer.
Control
Cables
Ethernet
USB-based
Ethernet-based
H-04
G-01
Monitoring & Control
Server
Easily Configured
Remote Monitoring & Control
You can develop a multi-function remote monitoring system
PLC
Monitor & Control
Server
PLC A/D D/A Counter
HUB
that can monitor, update and log I/O information, perform
task control and send alarms via e-mail.
This system can be completely developed and
I/O Controller +
Device Module
implemented on a web browser.
H-05
I/O Assist
Server
I/O Unit
Reliable Distributed Monitoring and Control with built-in
"Fail Safe" function
The F&eIT “N” Series units can remotely monitor and
control equipment using existing Ethernet network.
Easily installation in limited space with its compact
size, and quick fixing by 35mm DIN rail,screws or
magnets.An original "Fail Safe" function notifies
communication error between PC and the unit to
prevent unexpected malfunction.
H-02
Error
Control
Ethernet
Alert
H-04
F&eIT series
Ethernet-based
Remote I/O
Wireless networks deliver
greater freedom
Micro Access Point
I/O Controller
Monitoring Server
I/O Assistant Server
Wireless networking is now possible using
IEEE802.11a/b/gcompliant micro access points.
I/O Module
I/O Controllers
Increased potential of F&eIT is realized with the
Media Converter
addition of mobile communications and the
elimination of unwieldy wiring.
I/O Assist
Server
H-05
Switching Hub
Media Converter
Ethernet integration of
existing resources
By converting existing communication interfaces
into ethernet (both wired and wireless) you can
easily integrate the communications from existing
RS-232C/422
Wire LAN
industrial equipment and resources with those of
the F&eIT device modules.
Device 1
Device 2
H-07
GPIB
Wire LAN
H-08