Download Pineview CPU Part-D

Preface
Notebook Computer
M1110Q/M1110Q-C
Service Manual
Preface
I
Preface
Notice
The company reserves the right to revise this publication or to change its contents without notice. Information contained
herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor. They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are
they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication.
This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or
reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes.
Preface
Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of
their respective companies. They are mentioned for identification purposes only and are not intended as an endorsement
of that product or its manufacturer.
Version 1.0
July 2010
Trademarks
Intel and Intel Atom are trademarks of Intel Corporation.
Windows® is a registered trademark of Microsoft Corporation.
Other brand and product names are trademarks and /or registered trademarks of their respective companies.
II
Preface
About this Manual
This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and
inspection of personal computers.
It is organized to allow you to look up basic information for servicing and/or upgrading components of the M1110Q/
M1110Q-C series notebook PC.
The following information is included:
Chapter 1, Introduction, provides general information about the location of system elements and their specifications.
Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade
elements of the system.
Preface
Appendix A, Part Lists
Appendix B, Schematic Diagrams
Appendix C, Updating the FLASH ROM BIOS
III
Preface
IMPORTANT SAFETY INSTRUCTIONS
Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to persons when using any electrical equipment:
Preface
1. Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electrical shock from lightning.
3. Do not use the telephone to report a gas leak in the vicinity of the leak.
4. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may
explode. Check with local codes for possible special disposal instructions.
5. This product is intended to be supplied by a Listed Power Unit with an AC Input of 100 - 240V, 50 - 60Hz, DC Output
of 19V, 1.58A (30W) minimum AC/DC Adapter.
IV
Preface
Instructions for Care and Operation
The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:
1.
Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.
Do not expose the computer
to any shock or vibration.
2.
Do not place anything heavy
on the computer.
Keep it dry, and don’t overheat it. Keep the computer and power supply away from any kind of heating element. This
is an electrical appliance. If water or any other liquid gets into it, the computer could be badly damaged.
Do not leave it in a place
where foreign matter or moisture may affect the system.
Don’t use or store the computer in a humid environment.
Do not place the computer on
any surface which will block
the vents.
Preface
Do not expose it to excessive
heat or direct sunlight.
3.
Do not place it on an unstable
surface.
Follow the proper working procedures for the computer. Shut the computer down properly and don’t forget to save
your work. Remember to periodically save your data as data may be lost if the battery is depleted.
Do not turn off the power
until you properly shut down
all programs.
Do not turn off any peripheral
devices when the computer is
on.
Do not disassemble the computer by yourself.
Perform routine maintenance
on your computer.
V
Preface
4.
5.
Avoid interference. Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage your data.
Take care when using peripheral devices.
Use only approved brands of
peripherals.
Unplug the power cord before
attaching peripheral devices.
Preface
Power Safety
The computer has specific power requirements:

VI
•
•
Power Safety
Warning
•
Before you undertake
any upgrade procedures, make sure that
you have turned off the
power, and disconnected all peripherals
and cables (including
telephone lines). It is
advisable to also remove your battery in
order to prevent accidentally turning the
machine on.
•
•
•
Only use a power adapter approved for use with this computer.
Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply. If you are
unsure of your local power specifications, consult your service representative or local power company.
The power adapter may have either a 2-prong or a 3-prong grounded plug. The third prong is an important safety feature; do
not defeat its purpose. If you do not have access to a compatible outlet, have a qualified electrician install one.
When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire.
Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices.
Before cleaning the computer, make sure it is disconnected from any external power supplies.
Do not plug in the power
cord if you are wet.
Do not use the power cord if
it is broken.
Do not place heavy objects
on the power cord.
Preface
Battery Precautions
• Only use batteries designed for this computer. The wrong battery type may explode, leak or damage the computer.
• Do not continue to use a battery that has been dropped, or that appears damaged (e.g. bent or twisted) in any way. Even if the
computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire.
• Recharge the batteries using the notebook’s system. Incorrect recharging may make the battery explode.
• Do not try to repair a battery pack. Refer any battery pack repair or replacement to your service representative or qualified service
personnel.
• Keep children away from, and promptly dispose of a damaged battery. Always dispose of batteries carefully. Batteries may explode
or leak if exposed to fire, or improperly handled or discarded.
• Keep the battery away from metal appliances.
• Affix tape to the battery contacts before disposing of the battery.
• Do not touch the battery contacts with your hands or metal objects.
Battery Guidelines
Preface
The following can also apply to any backup batteries you may have.
• If you do not use the battery for an extended period, then remove the battery from the computer for storage.
• Before removing the battery for storage charge it to 60% - 70%.
• Check stored batteries at least every 3 months and charge them to 60% - 70%.

Battery Disposal
The product that you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste
officials for details in your area for recycling options or proper disposal.
Caution
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
Discard used battery according to the manufacturer’s instructions.
Battery Level
Click the battery icon
in the taskbar to see the current battery level and charge status. A battery that drops below a level of 10%
will not allow the computer to boot up. Make sure that any battery that drops below 10% is recharged within one week.
VII
Preface
Related Documents
You may also need to consult the following manual for additional information:
User’s Manual on DVD
This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup program. It also describes the installation and operation of the utility programs provided with the notebook PC.
System Startup
Preface
1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Securely attach any peripherals you want to use with the computer (e.g.
keyboard and mouse) to their ports.
4. Attach the AC/DC adapter to the DC-In jack on the left of the computer, then
plug the AC power cord into an outlet, and connect the AC power cord to
the AC/DC adapter.
5. Use one hand to raise the lid/LCD to a comfortable viewing angle (do not
exceed 120 degrees); use the other hand (as illustrated in <Hyperlink B n
I>Figure 1) to support the base of the computer (Note: Never lift the
computer by the lid/LCD).
6. Press the power button to turn the computer “on”.
VIII
Figure 1 - Opening
the Lid/LCD/Computer
with AC/DC Adapter
Plugged-In
Preface
Contents
Schematic Diagrams................................. B-1
Overview .........................................................................................1-1
Specifications ..................................................................................1-2
External Locator - Top View with LCD Panel Open ......................1-4
External Locator - Front & Right Side Views .................................1-5
External Locator - Left Side & Rear View .....................................1-6
External Locator - Bottom View .....................................................1-7
Mainboard Overview - Top (Key Parts) .........................................1-8
Mainboard Overview - Bottom (Key Parts) ....................................1-9
Mainboard Overview - Top (Connectors) .....................................1-10
Mainboard Overview - Bottom (Connectors) ...............................1-11
System Block Diagram ...................................................................B-2
Pineview CPU Part-D .....................................................................B-3
Pineview CPU Part A-C-F ..............................................................B-4
Pineview CPU Part B ......................................................................B-5
Pineview CPU Part E ......................................................................B-6
DDRIII SO-DIMM_0 .....................................................................B-7
Clock Generator ..............................................................................B-8
Tigerpoint Part A-B ........................................................................B-9
Tigerpoint Part C .........................................................................B-10
Tigerpoint Part D ..........................................................................B-11
Tigerpoint Part E-F .......................................................................B-12
USB, Panel, HDD, LED ...............................................................B-13
BTB, 3G, WLAN, BT ...................................................................B-14
Audio Codec VT1812 ...................................................................B-15
KBC-ITE IT8502E-J, TP, LID .....................................................B-16
PWR AC_IN, Charge ...................................................................B-17
PWR SW, 1.8VS, 3VS, 5VS, 1.5VS ............................................B-18
PWR VDD3, 3.3V, 5V, SYS 15V ................................................B-19
PWR 1.5V, 0.75V .........................................................................B-20
PWR 0.89V, 1.05VS, 1.5VS .........................................................B-21
PWR VCORE ...............................................................................B-22
CRT ...............................................................................................B-23
Card Reader (with LAN) JMB261 ................................................B-24
BTB, USB, CCD, PWR SW .........................................................B-25
Click Board ...................................................................................B-26
Power Button Board .....................................................................B-27
Disassembly ...............................................2-1
Overview .........................................................................................2-1
Maintenance Tools ..........................................................................2-2
Connections .....................................................................................2-2
Maintenance Precautions .................................................................2-3
Disassembly Steps ...........................................................................2-4
Removing the Battery ......................................................................2-5
Removing the System Memory (RAM) ..........................................2-6
Removing the Wireless LAN Module .............................................2-8
Removing the Keyboard ..................................................................2-9
Removing the Hard Disk Drive .....................................................2-10
Removing the Bluetooth Module ..................................................2-12
Part Lists ..................................................A-1
Parts List Illustration Location ....................................................... A-2
Top ................................................................................................. A-3
Bottom ............................................................................................ A-4
LCD ................................................................................................ A-5
Updating the FLASH ROM BIOS......... C-1
To update the FLASH ROM BIOS you must: C-1
IX
Preface
Introduction ..............................................1-1
Preface
Preface
Download the BIOS ....................................................................... C-1
Unzip the downloaded files to a bootable CD/DVD/ or USB Flash
drive ................................................................................................ C-1
Set the computer to boot from the external drive ........................... C-1
Use the flash tools to update the BIOS .......................................... C-2
Restart the computer (booting from the HDD) .............................. C-2
X
Introduction
Chapter 1: Introduction
Overview
This manual covers the information you need to service or upgrade the M1110Q/M1110Q-C series notebook computer.
Information about operating the computer (e.g. getting started, and the Setup utility) is in the User’s Manual. Information
about dri-vers (e.g. VGA & audio) is also found in the User’s Manual. The manual is shipped with the computer.
Operating system Window 7 has its own manuals as do application softwares (e.g. word processing and database programs). If you have questions about those programs, you should consult those manuals.
1.Introduction
The M1110Q/M1110Q-C series notebook is designed to be upgradeable. See Disassembly on page 2 - 1 for a detailed
description of the upgrade procedures for each specific component. Please take note of the warning and safety information indicated by the “” symbol.
The balance of this chapter reviews the computer’s technical specifications and features.
Overview 1 - 1
Introduction
Specifications

Latest Specification Information
1.Introduction
The specifications listed here are correct at the
time of sending them to the press. Certain items
(particularly processor types/speeds) may be
changed, delayed or updated due to the manufacturer's release schedule. Check with your
service center for more details.
Processor
Security
Intel® Atom™ Processor N455
1.66GHz, 512KB L2 Cache, 667MHz FSB, TDP:6.5W
Kensington Lock Slot
BIOS Password
Intel® Atom™ Processor N475
1.83GHz, 512KB L2 Cache, 667MHz FSB, TDP:6.5W
Interface
Intel® NM10 Express Chipset
Three USB 2.0 Ports
One Headphone-Out Jack
One Microphone-In Jack
One External Monitor Port
One RJ-45 LAN Jack
One DC-in Jack
Memory
Keyboard
One 204 Pin SO-DIMM Socket Supporting DDR3 667MHz
Memory
“WinKey” keyboard (with embedded numeric keypad)
Display
10.1” (25,6cm) WSVGA TFT LCD
Core Logic

Memory Expandable up to 2GB
CPU
Video Adapter
The CPU is not a user serviceable part. Accessing the CPU in any way may violate your
warranty.
Intel GMA 3150
Shared Memory Architecture (DVMT) up to 384MB
MS DirectX® 9.0 compatible
Storage
One Changeable 2.5" 9.5mm (h) SATA Hard Disk Drive
(Factory Option) External USB DVD Super Multi Drive
Module
BIOS
One 8Mb SPI Flash ROM
Phoenix™ BIOS
Audio
High Definition Audio Compliant Interface
2 * Built-In Speakers
Built-In Microphone
1 - 2 Specifications
Pointing Device
Built-in Touchpad
Communication
10Mb/100Mb Ethernet LAN
300K Pixel USB PC Camera Module
(Factory Option) Bluetooth 2.1 + EDR Module
(Factory Option) 3.75G/HSPA Half Mini-Card Module
(Factory Option) 802.11b/g/n Wireless LAN Half Mini-Card
Module
Card Reader
Embedded 8-in-1 Card Reader
MMC (MultiMedia Card) / RS MMC
SD (Secure Digital) / Mini SD / SDHC
MS (Memory Stick) / MS Pro / MS Duo
Introduction
Power
Full Range AC/DC Adapter
AC Input: 100 - 240V, 50 - 60Hz
DC Output: 19V, 1.58A (30W)
Removable 3 Cell Smart Lithium-Ion Battery Pack, 24.42WH
(Factory Option) Removable 6 Cell Smart Lithium-Ion
Battery Pack, 48.84WH
Energy Star 5.0 Compliant
Environmental Spec
1.Introduction
Temperature
Operating: 5°C - 35°C
Non-Operating: -20°C - 60°C
Relative Humidity
Operating: 20% - 80%
Non-Operating: 10% - 90%
Dimensions & Weight
Model A:
266mm (w) x 185mm (d) x 18.5 - 25.4mm (h)
0.94kg (with 24.42WH Battery)
Model B:
266mm (w) x 185mm (d) x 18.5 - 26.6mm (h)
0.97kg (with 24.42WH Battery)
Model C:
266mm (w) x 185mm (d) x 19.7 - 27.1mm (h)
0.93kg (with 24.42WH Battery)
Specifications 1 - 3
Introduction
Figure 1
External Locator - Top View with LCD Panel Open
1.Introduction
Top View
1
1. Built-In PC Camera
2. LCD
3. Keyboard
4. Built-In
Microphone
5. Touchpad &
Buttons
6. LED Indicators
2
3
4
6
1 - 4 External Locator - Top View with LCD Panel Open
5
Introduction
External Locator - Front & Right Side Views
Figure 2
Front View
1. LED Indicators
FRONT VIEW
1
Right Side View
RIGHT SIDE VIEW
5
1
2
2
3
1. 8-in-1 Card
Reader
2. 2 * USB 2.0 Ports
3. RJ-45 LAN Port
4. External Monitor
Port
5. Power Button
4
External Locator - Front & Right Side Views 1 - 5
1.Introduction
Figure 3
Introduction
External Locator - Left Side & Rear View
Figure 4
Left Side View
Security Lock Slot
DC-In Jack
Vent
USB 2.0 Port
Microphone-In
Jack
6. Headphone-Out
Jack
/
LEFT SIDE VIEW
1
2
3
4
1.Introduction
1.
2.
3.
4.
5.
Figure 5
Rear View
1. Battery
REAR VIEW
1
1 - 6 External Locator - Left Side & Rear View
5
6
Introduction
External Locator - Bottom View
Figure 6
Bottom View
1. Battery
2. Component Bay
Cover
3. Vent
4. Speakers
1
1.Introduction
3
2

Overheating
4
4
To prevent your computer from overheating, make sure nothing blocks any vent
while the computer is
in use.
External Locator - Bottom View 1 - 7
Introduction
Figure 7
Mainboard Overview - Top (Key Parts)
Mainboard Top
Key Parts
Clock Generator
Azalia Codec
KBC-ITE IT8502E
JMC261
8-in-1 Card
Reader Socket
1.Introduction
1.
2.
3.
4.
5.
1
2
3
4
1 - 8 Mainboard Overview - Top (Key Parts)
5
Introduction
Mainboard Overview - Bottom (Key Parts)
Figure 8
Mainboard Bottom
Key Parts
5
4
3
1
2
Mainboard Overview - Bottom (Key Parts) 1 - 9
1.Introduction
1. Mini-Card
Connector (WLAN
Module)
2. Optional Mini-Card
Connector (3.5G
Module)
3. Memory Slot
DDR3 SO-DIMM
4. South Bridge
5. Embedded CPU
Introduction
Figure 9
Mainboard Overview - Top (Connectors)
1.Introduction
Mainboard Top
Connectors
1. Keyboard Cable
Connector
2. TouchPad Cable
Connector
3. Speaker Cable
Connector
4. Microphone
Cable Connector
5. Switch Board
Cable Connector
6. CCD Cable
Connector
6
5
1
2
4
3
1 - 10 Mainboard Overview - Top (Connectors)
Introduction
Mainboard Overview - Bottom (Connectors)
Figure 10
Mainboard Bottom
Connectors
10
1
5
3
6
9
3
4
8
7
Mainboard Overview - Bottom (Connectors) 1 - 11
1.Introduction
2
1. External Monitor
Port
2. RJ-45 Lan Port
3. USB Ports
4. CMOS Battery
Connector
5. LCD Cable
Connector
6. CPU Fan Cable
Connector
7. Headphone-Out
Jack
8. Microphone-In
Jack
9. USB Port
10. DC-In Jack
1.Introduction
Introduction
1 - 12
Disassembly
Chapter 2: Disassembly
Overview
This chapter provides step-by-step instructions for disassembling the M1110Q/M1110Q-C series notebook’s parts and
subsystems. When it comes to reassembly, reverse the procedures (unless otherwise indicated).
We suggest you completely review any procedure before you take the computer apart.
To make the disassembly process easier each section may have a box in the page margin. Information contained under
the figure # will give a synopsis of the sequence of procedures involved in the disassembly procedure. A box with a 
lists the relevant parts you will have after the disassembly process is complete. Note: The parts listed will be for the disassembly procedure listed ONLY, and not any previous disassembly step(s) required. Refer to the part list for the previous disassembly procedure. The amount of screws you should be left with will be listed here also.

Information
A box with a  will also provide any possible helpful information. A box with a  contains warnings.
An example of these types of boxes are shown in the sidebar.

Warning
Overview 2 - 1
2.Disassembly
Procedures such as upgrading/replacing the RAM, optical device and hard disk are included in the User’s Manual but are
repeated here for your convenience.
Disassembly
NOTE: All disassembly procedures assume that the system is turned OFF, and disconnected from any power supply (the
battery is removed too).
Maintenance Tools
The following tools are recommended when working on the notebook PC:
2.Disassembly
•
•
•
•
•
•
M3 Philips-head screwdriver
M2.5 Philips-head screwdriver (magnetized)
M2 Philips-head screwdriver
Small flat-head screwdriver
Pair of needle-nose pliers
Anti-static wrist-strap
Connections
Connections within the computer are one of four types:
2 - 2 Overview
Locking collar sockets for ribbon connectors
To release these connectors, use a small flat-head screwdriver to
gently pry the locking collar away from its base. When replacing the connection, make sure the connector is oriented in the
same way. The pin1 side is usually not indicated.
Pressure sockets for multi-wire connectors
To release this connector type, grasp it at its head and gently
rock it from side to side as you pull it out. Do not pull on the
wires themselves. When replacing the connection, do not try to
force it. The socket only fits one way.
Pressure sockets for ribbon connectors
To release these connectors, use a small pair of needle-nose pliers to gently lift the connector away from its socket. When replacing the connection, make sure the connector is oriented in
the same way. The pin1 side is usually not indicated.
Board-to-board or multi-pin sockets
To separate the boards, gently rock them from side to side as
you pull them apart. If the connection is very tight, use a small
flat-head screwdriver - use just enough force to start.
Disassembly
Maintenance Precautions
The following precautions are a reminder. To avoid personal injury or damage to the computer while performing a removal and/or replacement job, take the following precautions:
•Before removing or servicing any part from the computer, turn the computer off and detach any power supplies.
•When you want to unplug the power cord or any cable/wire, be sure to disconnect it by the plug head. Do not pull on the wire.
6. Peripherals – Turn off and detach any peripherals.
7. Beware of static discharge. ICs, such as the CPU and main support chips, are vulnerable to static electricity.
Before handling any part in the computer, discharge any static electricity inside the computer. When handling a
printed circuit board, do not use gloves or other materials which allow static electricity buildup. We suggest that
you use an anti-static wrist strap instead.
8. Beware of corrosion. As you perform your job, avoid touching any connector leads. Even the cleanest hands produce oils which can attract corrosive elements.
9. Keep your work environment clean. Tobacco smoke, dust or other air-born particulate matter is often attracted
to charged surfaces, reducing performance.
10. Keep track of the components. When removing or replacing any part, be careful not to leave small parts, such as
screws, loose inside the computer.
Power Safety
Warning
Before you undertake
any upgrade procedures, make sure that
you have turned off the
power, and disconnected all peripherals
and cables (including
telephone lines). It is
advisable to also remove your battery in
order to prevent accidentally turning the
machine on.
Cleaning
Do not apply cleaner directly to the computer, use a soft clean cloth.
Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.
Overview 2 - 3
2.Disassembly
1. Don't drop it. Perform your repairs and/or upgrades on a stable surface. If the computer falls, the case and other
components could be damaged.
2. Don't overheat it. Note the proximity of any heating elements. Keep the computer out of direct sunlight.
3. Avoid interference. Note the proximity of any high capacity transformers, electric motors, and other strong magnetic fields. These can hinder proper performance and damage components and/or data. You should also monitor
the position of magnetized tools (i.e. screwdrivers).
4. Keep it dry. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly
damaged.
5. Be careful with power. Avoid accidental shocks, discharges or explosions.

Disassembly
Disassembly Steps
The following table lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM
THE DISASSEMBLY STEPS IN THE ORDER INDICATED.
To remove the Battery:
2.Disassembly
1. Remove the battery
To remove the Bluetooth Module:
page 2 - 5
To remove the System Memory:
1. Remove the battery
2. Remove the system memory
page 2 - 5
page 2 - 6
To remove the Wireless LAN Module:
1. Remove the battery
2. Remove the wireless LAN
page 2 - 5
page 2 - 8
To remove the Keyboard:
1. Remove the battery
2. Remove the keyboard
page 2 - 5
page 2 - 9
To remove the HDD:
1. Remove the battery
2. Remove the keyboard
3. Remove the HDD
2 - 4 Disassembly Steps
page 2 - 5
page 2 - 9
page 2 - 10
1.
2.
3.
4.
Remove the battery
Remove the keyboard
Remove the HDD
Remove the Bluetooth
page 2 - 5
page 2 - 9
page 2 - 10
page 2 - 12
Disassembly
Removing the Battery
1.
2.
3.
4.
Turn the computer off, and turn it over.
Slide the latch 1 in the direction of the arrow (Figure 1a).
Slide the latch 2 in the direction of the arrow, and hold it in place (Figure 1a).
Slide the battery 63 in the direction of the arrow 4 (Figure 1b).
a.
2
Figure 1
Battery Removal
a. Slide the latch and hold in
place.
b. Slide the battery in the direction of the arrow.
1
2.Disassembly

3. Battery
b.
3
4
Removing the Battery 2 - 5
Disassembly
Figure 2
RAM Module
Removal
a. Remove the screw.
b. Lift the bay cover
up.
Removing the System Memory (RAM)
The computer has one memory socket for 200 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
DDR3 667MHz. The main memory can be expanded up to 2GB. The SO-DIMM modules supported are 1024MB, and
2048MB and DDRIII Modules. The total memory size is automatically detected by the POST routine once you turn on
your computer.
Memory Upgrade Process
2.Disassembly

Contact Warning
Be careful not to touch
the metal pins on the
module’s connecting
edge. Even the cleanest hands have oils
which can attract particles, and degrade the
module’s
performance.
1. Turn off the computer, remove the battery (page 2 - 5).
2. Locate the component bay cover 1 , and remove screw 2 (Figure 2a).
3. Carefully lift the component bay cover 1 up (Figure 2b).
a.
b.
2

1. Component Bay Cover
1
1
•
1 Screw
2 - 6 Removing the System Memory (RAM)
Disassembly
4. Gently pull the two release latches ( 3 - 4 ) on the sides of the memory socket in the direction indicated by the
arrows (Figure 3c).
d.
c.
Figure 3
RAM Module
Removal (cont’d.)
c. Pull the release latches.
d. Remove the module.
5
3
4
2.Disassembly
5. The RAM module 5 will pop-up (Figure 3d), and you can then remove it.
6. Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
7. The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the slot as it
will go. DO NOT FORCE the module; it should fit without much pressure.
8. Press the module in and down towards the mainboard until the slot levers click into place to secure the module.
9. Replace the bay cover and screw.

5. RAM Module
10. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
Removing the System Memory (RAM) 2 - 7
Disassembly
Figure 4
Wireless LAN
Module Removal
2.Disassembly
a. Remove the cover and
disconnect the cables
and remove the screw.
b. The WLAN module will
pop up.
c. Lift the WLAN module
out.
Removing the Wireless LAN Module
1.
2.
3.
4.
5.
Turn off the computer, remove the battery (page 2 - 5) and the component bay cover (page 2 - 6).
The Wireless LAN module will be visible at point 1 (Figure 4a) on the mainboard.
Carefully disconnect cables 2 - 3 , then remove screw 4 from the module socket (Figure 4a).
The Wireless LAN module 5 (Figure 4b) will pop-up.
Lift the Wireless LAN module (Figure 4c) up and off the computer.
a.
c.
2
Note: Make sure you
reconnect the antenna
cable to ‘’1’’ +
‘’2’’socket (Figure
b).
3 4
1
b.

5
5. WLAN Module.
5
•
1 Screw
2 - 8 Removing the Wireless LAN Module
Disassembly
Removing the Keyboard
Figure 5
Keyboard Removal
1. Turn off the computer and remove the battery (page 2 - 5).
2. Use only the small tool A provided (see picture below) to carefully press the four keyboard latches 1 - 4 at the
top of the keyboard to elevate the keyboard from its normal position (Figure 5a).
3. Carefully lift the keyboard 5 up, being careful not to bend the keyboard ribbon cable 6 (Figure 5b).
4. Disconnect the keyboard ribbon cable 6 from the locking collar socket 7 (Figure 5b)
5. Carefully lift up the keyboard 5 (Figure 5c) off the computer.
a. Press the four latches to
release the keyboard.
b. Lift the keyboard up and
disconnect the cable from
the locking collar.
c. Remove the keyboard.
c.
a.
1
2
3
4

Re-Inserting the Keyboard
5
When re-inserting the
keyboard, align first
the three keyboard
tabs (Figure 5d) that
are located at the bottom, to the slots in the
case.
A
d.
b.
7
6

5
5.
1. Keyboard
Battery
6. Keyboard
Keyboard Tabs
Removing the Keyboard 2 - 9
2.Disassembly
Tool for pressing
the keyboard
latches.
Disassembly
Figure 6
HDD Assembly
Removal
a. Locate the hard disk and
remove the screw.
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 9.5mm
(h) and a speed of 5400 RPM or lower. Follow your operating system’s installation instructions, and install all necessary
drivers and utilities (as outlined in Chapter 4 of the User’s Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
1. Turn off the computer, remove the battery (page 2 - 5) and remove the keyboard (page 2 - 9).
2. Locate the hard disk at point 1 and remove screw 2 (Figure 6a).
2.Disassembly
a.
1
2


•
1 Screw
HDD System Warning
New HDD’s are blank. Before you begin make sure:
You have backed up any data you want to keep from your old HDD.
You have all the CD-ROMs and FDDs required to install your operating system and programs.
If you have access to the internet, download the latest application and hardware driver updates for
the operating system you plan to install. Copy these to a removable medium.
2 - 10 Removing the Hard Disk Drive
Disassembly
3.
4.
5.
6.
7.
Remove the HDD support module 63 (Figure 7b).
Grip the mylar cover and slide the hard disk in the direction of arrow 4 (Figure 7b).
Lift the hard disk 65 out of the bay 6 (Figure 7c).
Remove the screws 7 - 8 and adhesive mylar cover 69 from the hard disk 65 (Figure 7d).
Reverse the process to install a new hard disk (do not forget to replace all the screws and cover).
b.
Figure 7
HDD Assembly
Removal (cont’d.)
d.
8
9
2.Disassembly
4
b. Remove the HDD support module. Grip the
mylar cover and slide the
HDD in the direction of
the arrow.
c. Lift the HDD assembly
out of the bay.
d. Remove the screws and
adhesive cover.
3
5
7
c.

6
5
3. HDD Support Module
5. HDD
9. Adhesive Mylar Cover
•
2 Screws
2 - 11
Disassembly
Figure 8
Removing the Bluetooth Module
Bluetooth Module
Removal
1. Turn off the computer, remove the battery (page 2 - 5), remove the keyboard (page 2 - 9), remove the HDD (page
2 - 10).
2. Remove hinge covers 61 and 62 in the direction of the arrows 3 - 4 (Figure 8a).
a. Remove the hinge covers.
3. Remove the top case’s screws 5 - 7 and disconnect cables 8 - 10 (Figure 8b).
b. Remove the top case’s
screws and disconnect cables.
a.
3
2
4
2.Disassembly
1
b.
5
8

1. & 2. Hinge Covers
10
•
3 Screws
2 - 12 Removing the Bluetooth Module
6
9
7
Disassembly
4.
5.
6.
7.
Turn over the computer and remove the bottom case’s screws 11 - 16 (Figure 9c).
Turn over the computer again and carefully lift the top case 17 up and off the computer (Figure 9d).
Remove screw 18 from the Bluetooth module and disconnect connector 19 and cable 20 (Figure 9d).
Carefully lift the Bluetooth module 21 up and off the computer (Figure 9e).
c.
Bluetooth Module
Removal
12
21
16
15
14
13
d.

17. Top Case
21. Bluetooth Module
18 19
17
•
7 Screws
20
Removing the Bluetooth Module 2 - 13
2.Disassembly
c. Turn over the computer
and remove the bottom
case’s screws.
d. Turn over the computer
again and carefully lift the
top case up and off the
computer. Remove screw
from the module and disconnect the cable and the
connector.
e. Lift the Bluetooth module
up and off the computer.
e.
11
Figure 9
2.Disassembly
Disassembly
2 - 14
Part Lists
Appendix A:Part Lists
This appendix breaks down the M1110Q/M1110Q-C series notebook’s construction into a series of illustrations. The
component part numbers are indicated in the tables opposite the drawings.
Note: This section indicates the manufacturer’s part numbers. Your organization may use a different system, so be sure
to cross-check any relevant documentation.
Note: Some assemblies may have parts in common (especially screws). However, the part lists DO NOT indicate the
total number of duplicated parts used.
A.Part Lists
Note: Be sure to check any update notices. The parts shown in these illustrations are appropriate for the system at the
time of publication. Over the product life, some parts may be improved or re-configured, resulting in new part numbers.
A - 1
Part Lists
Parts List Illustration Location
The following table indicates where to find the appropriate parts list illustration.
Table A - 1
A.Part Lists
Parts List Illustration
Location
A - 2 Parts List Illustration Location
Parts
M1110Q/M1110Q-C
Top
page A - 3
Bottom
page A - 4
LCD
page A - 5
Part Lists
Top
Top
Top A - 3
A.Part Lists
Figure A - 1
Part Lists
A.Part Lists
Bottom
Figure A - 2
Bottom
A - 4 Bottom
Part Lists
LCD
LCD
非耐落
LCD A - 5
A.Part Lists
Figure A - 3
A.Part Lists
Part Lists
A-6
Schematic Diagrams
Appendix B: Schematic Diagrams
Table B - 1
This appendix has circuit diagrams of the M1110Q/M1110Q-C notebook’s PCB’s. The following table indicates where
to find the appropriate schematic diagram.
Diagram - Page
Diagram - Page
System Block Diagram - Page B - 2
Tigerpoint Part D - Page B - 11
PWR 1.5V, 0.75V - Page B - 20
Pineview CPU Part-D - Page B - 3
Tigerpoint Part E-F - Page B - 12
PWR 0.89V, 1.05VS, 1.5VS - Page B - 21
Pineview CPU Part A-C-F - Page B - 4
USB, Panel, HDD, LED - Page B - 13
PWR VCORE - Page B - 22
Pineview CPU Part B - Page B - 5
BTB, 3G, WLAN, BT - Page B - 14
CRT - Page B - 23
Pineview CPU Part E - Page B - 6
Audio Codec VT1812 - Page B - 15
Card Reader (with LAN) JMB261 - Page B - 24
DDRIII SO-DIMM_0 - Page B - 7
KBC-ITE IT8502E-J, TP, LID - Page B - 16
BTB, USB, CCD, PWR SW - Page B - 25
Clock Generator - Page B - 8
PWR AC_IN, Charge - Page B - 17
Click Board - Page B - 26
Tigerpoint Part A-B - Page B - 9
PWR SW, 1.8VS, 3VS, 5VS, 1.5VS - Page B - 18 Power Button Board - Page B - 27
Tigerpoint Part C - Page B - 10
PWR VDD3, 3.3V, 5V, SYS 15V - Page B - 19

Version Note
The schematic diagrams
in this chapter are based
upon
version
6-7PM1114-001. If your mainboard (or other boards)
are a later version, please
check with the Service
Center for updated diagrams (if required).
B - 1
B.Schematic Diagrams
Diagram - Page
SCHEMATIC
DIAGRAMS
Schematic Diagrams
System Block Diagram
VDD3,VDD5
CLEVO Tigerhill- Pineview System Block Diagram
AC-IN,CHARGER
14.318 MHz
Colck Generator
SLG8SP510T
17.1mm*8.1mm*1.2mm
TSSOP 64PIN
DDR3 One Channel
1GB & 2GB
Memory Termination
3.3V,5V,3VS,5VS,1.8VS
SO-DIMM0
1.05VS,1.5VS,0.89_GFX
DDR3
B.Schematic Diagrams
1.5V,0.75VS(VTT_MEM)
Intel
Pineview 45nm
VCORE
C0/C1/C2/C3/C4
Sheet 1 of 26
System Block
Diagram
LCD CONNECTOR
1280x800
667MT/s
PROCESSOR
<8"
CLICK BOARD
FCBGA 559 pin
TOUCH PAD
MIC
IN
22mm*22mm*2.35mm
1400x1050
Direct X9
CRT OUT
HP
OUT
INT SPK R
X2-GEN1
10 Gbits/s
32.768 KHz
Azalia Codec
VT1812
DMI
EC
ITE 8502E
<=8"
INT. K/B
LPC 33 MHz
0.5"~11"
SMART
FAN
17mm*17mm*1.06mm
B - 2 System Block Diagram
24 MHz
PCIE 100 MHz
<12"
32.768KHz
Mini Card
WLAN
Bluetooth(USB5)
<12"
USB2.0 480 Mbps
(USB2)
Port_2
INT MIC
AZALIA LINK
360 MMAP
SMART
BATTERY
SATA I/II 3.0Gb/s
SATA HDD
0.1"~13
SOUTH BRIDGE
Tiger Point
EC SMBUS
THERMAL
SENSOR
EMC1402
9*9*1.6mm
SYSTEM SMBUS
14*14*1.6mm
LPC ROM
INT SPK L
48pins QFN
128pins LQFP
Mini PCIE
3G CARD (USB4)
(USB7)
CCD
JMC251/ JMC261
LAN
CARD READER
25
MHz
1"~16"
(USB0)
Port_0
(USB1)
Port_1
RJ-45
Card Reader
Socket
Schematic Diagrams
Pineview CPU Part-D
CPU_RSVD_01
H_TDI
H_TDO
H_TMS
R106
R5
R15
R105
R13
R8
R117
R118
R108
R119
51_04
*51_04
*51_04
*51_04
*51_04
*51_04
*51_04
*51_04
*51_04
*51_04
H_BPM5_PREQ#
H_BPM4_PRDY#
H_BPM_1_N0
H_BPM_1_N1
H_BPM_1_N2
H_BPM_1_N3
H_BPM_2_N0
H_BPM_2_N1
H_BPM_2_N2
H_BPM_2_N3
(1)
[12]
[12]
[12]
[12]
[12]
[12]
[12]
[12]
T7
EM I
[12] MCH_BLON
[15] MCH_BLCTL
C167
H_TCK
H_TRST#
LVD_IBG
LVD_VREFH_OUT_R
LVD_VREFL_OUT_R
LAYOUT NOTE:
Place te rm ination near CPU
3.3VS
RN1
2.2K_4P2R_04
1
4
2
3
[12] L_DDC_CLK
[12] L_DDC_DATA
[12] LVDD_EN
REV = 1.1
LVD_A_CLKM
LVD_A_CLKP
LVD_A_DATAM_0
LVD_A_DATAP_0
LVD_A_DATAM_1
LVD_A_DATAP_1
LVD_A_DATAM_2
LVD_A_DATAP_2
THERMTRIP_B
PROCHOT_B
CPUPWRGOOD
GTLREF
PINE_VIEW_M
H_BPM_1_N0
H_BPM_1_N1
H_BPM_1_N2
H_BPM_1_N3
G11
E15
G13
F13
H_BPM_2_N0
H_BPM_2_N1
H_BPM_2_N2
H_BPM_2_N3
B18
B20
C20
B21
CPU_RSVD_01
H_TDI
H_TDO
H_TCK
H_TMS
H_TRST#
G5
D14
D13
B14
C14
C16
H_THERMDA
H_THERMDC
D30
E30
VSS
RSVD
RSVD
BPM_1B_0
BPM_1B_1
BPM_1B_2
BPM_1B_3
BPM_2B_0#/RSVD
BPM_2B_1#/RSVD
BPM_2B_2#/RSVD
BPM_2B_3#/RSVD
E7
H7
H6
F10
F11
E5
F8
H_SMI# [9]
H_A20M# [9]
H_FERR# [9]
H_INTR [9]
H_NMI
[9]
H_IGNNE# [9]
H_STPCLK# [9]
Place ne ar GTLREF'S pin
Zo = 50 Ohm ? 5%
Signal : 5 m ils
length < 500 m ils
BCLKN
BCLKP
CPU
BSEL_0
BSEL_1
BSEL_2
VID_0
VID_1
VID_2
VID_3
VID_4
VID_5
VID_6
RSVD
TDI
TDO
TCK
TMS
TRST_B
RSVD
RSVD
RSVD
RSVD
THRMDA_1
THRMDC_1
RSVD_TP
RSVD_TP
EXTBGREF
G6
G10
G8
E11 H_BPM4_PRDY #
F15 H_BPM5_PREQ#
H_DPRSTP# [10,21]
H_DPSLP# [10]
H_INIT# [9]
E13
H_THERMTRIP# [9]
C18 H_PROCHOT#
W1
RSVD_C30
RSVD_D31
2K_1%_04
1.05VS
CLK_CPU_BCLK# [7]
CLK_CPU_BCLK [7]
CLK_BSEL0 [3,7]
CLK_BSEL1 [3,7]
CLK_BSEL2 [3,7]
H30
H29
H28
G30
G29
F29
E29
H_VID0
H_VID1
H_VID2
H_VID3
H_VID4
H_VID5
H_VID6
T2
T6
T3
T8
T4
R21
976_1%_04
EXTBGREF
T10
T5
K5
H5
K6
K9 CPU_RSVD_TP_01
D19 CPU_RSVD_TP_02
K7 EXTBGREF
R102
GTLREF M AX trace le ngth of
500 m ils and 5 m ils s pacing
H10
J10
L7
D20 CPU_RSVD_05
H13 CPU_RSVD_06
D18 CPU_RSVD_07
1K_1%_04
LAYOUT NOTE:
H27
L6
CPU_RSVD_02
E17 CPU_RSVD_03
R101
H_PWRGD [10]
A13 CPU_GTLREF
[21]
[21]
[21]
[21]
[21]
[21]
[21]
R27
3.32K_1%_04
Sheet 2 of 26
Pineview CPU PartD
1.05VS
H_SMI#
H_A20M#
H_INTR
H_NMI
H_IGNNE#
H_PWRGD
H_INIT#
R6
R14
R100
R9
R109
R30
R12
*1K_04
*1K_04
*1K_04
*1K_04
*1K_04
*1K_04
*1K_04
H_PROCHOT#
R107
68_04
PROCHOT# m us t be term inated w ith a 56-O,
pull-up res is tor to V CCP e ve n if it is not us ed.
CLK_BSEL0
CLK_BSEL1
CLK_BSEL2
C30
D31
1.05VS
LAYOUT NOTE:
CPU_GTLREF
DPRSTP_B
DPSLP_B
INIT_B
PRDY _B
PREQ_B
LVDS
LVD_IBG
LVD_VBG
LVD_VREFH
LVD_VREFL
LBKLT_EN
LBKLT_CTL
LCTLA_CLK
LCTLB_DATA
LDDC_CLK
LDDC_DATA
LVDD_EN
(2)
LV DS Control Signal Group
LBKLT_CTL,LBKLT_EN,LV DD_EN
Zo = 50 Ohm ? 0%
signal : 5 m ils
le ngth < 6000 m ils
LCTLA_CLK
LCTLB_DATA
ICH
SMI_B
A20M_B
FERR_B
LINT00
LINT10
IGNNE_B
STPCLK_B
R17
R110
R11
470_04
470_04
470_04
4 OF 6
PINEVIEW-M
Thermal IC
3.3V
3.3VS
C13
3/18
R4
0.1u_16V_Y5V_04
VDD
D+
THERM
ALERT
C12
1000p_50V_X7R_04
3
5 DGND
SDATA
SCLK
H_THERMDA
H_THERMDC
10K_04
1
2
U3
EMC1402
LAYOUT NOTE:
LAYOUT NOTE:
Route H_THERM DA and
H_THERM DC on sam e layer.
10 m ils trace and 10 m ils spacing.
Clos e to Therm al IC
4
6
7
8
THERM_ALERT# [10,15]
SMD_CPU_THERM [15]
SMC_CPU_THERM [15]
[8,10,11,12,13,17,18,19] 3.3V
[3,5,6,7,8,9,10,11,12,13,14,15,17,20,21] 3.3VS
[5,7,9,10,11,20] 1.05VS
Pineview CPU Part-D B - 3
B.Schematic Diagrams
51_04
51_04
2.37K_1%_04
*10mil_short
*10mil_short
R22
J28
N22
N23
L27
*0_04 Z0201 L26
L23
K25
K23
K24
H26
LVD_IBG
TP_LVD_VBG
LVD_VREFH_OUT_R
LVD_VREFL_OUT_R
R22
LCTLA_CLK
LCTLB_DATA
0.1u_16V_Y 5V_04
R104
R116
R29
R24
R23
U13D
U25
U26
R23
R24
N26
N27
R26
R27
LVDS-LCLKN
LVDS-LCLKP
LVDS-L0N
LVDS-L0P
LVDS-L1N
LVDS-L1P
LVDS-L2N
LVDS-L2P
C166
1u_6.3V_X5R _06
62_04
51_04
*51_04
51_04
C17
1u_6.3V_X5R _06
R7
R115
R103
R114
C173
*220p_50V_NPO_04
1.05VS
(1)
LV DS Clock & Data Signal Group
Zdiff = 90 Ohm ? 0%
signal / s pace : 4 / 5 m ils
le ngth < 7850 m ils
Schematic Diagrams
Pineview CPU Part A-C-F
B.Schematic Diagrams
DMI Signal Group
Sheet 3 of 26
Pineview CPU Part
A-C-F
A11
A16
A19
A29
A3
A30
A4
AA13
AA14
AA16
AA18
AA2
AA22
AA25
AA26
AA29
AA8
AB19
AB21
AB28
AB29
AB30
AC10
AC11
AC19
AC2
AC21
AC28
AC30
AD26
AD5
AE1
AE11
AE13
AE15
AE17
AE22
AE31
AF11
AF17
AF21
AF24
AF28
AG10
AG3
AH18
AH23
AH28
AH4
AH6
AH8
AJ1
AJ16
AJ31
AK1
AK2
AK23
AK30
AK31
AL13
AL19
AL2
AL23
AL29
AL3
AL30
AL9
B13
B16
B19
B22
B30
B31
B5
B9
C1
C12
C21
C22
C25
C31
D22
E1
E10
E19
E21
E25
E8
F17
F19
U13F
REV = 1.1
VSS
VSS
VSS
VSS
VSS
VSS
RSVD_NCTF
VSS
RSVD_NCTF
VSS
RSVD_NCTF
VSS
RSVD_NCTF
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS PINE_VIEW_MVSS
VSS
VSS
VSS
VSS
GND
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
RSVD_NCTF
VSS
VSS
VSS
VSS
VSS
RSVD_NCTF
VSS
RSVD_NCTF
VSS
VSS
VSS
RSVD_NCTF
VSS
RSVD_NCTF
VSS
VSS
VSS
VSS
VSS
RSVD_NCTF
VSS
VSS
VSS
RSVD_NCTF
VSS
RSVD_NCTF
VSS
RSVD_NCTF
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
RSVD_NCTF
VSS
RSVD_NCTF
VSS
VSS
VSS
VSS
VSS
RSVD_NCTF
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
RSVD_NCTF
VSS
RSVD_NCTF
VSS
VSS
VSS
VSS
VSS
VSS
VSS
VSS
F24
F28
F4
G15
G17
G22
G27
G31
H11
H15
H2
H21
H25
H8
J11
J13
J15
J4
K11
K13
K19
K26
K27
K28
K30
K4
K8
L1
L13
L18
L22
L24
L25
L29
M28
M3
N1
N13
N18
N24
N25
N28
N4
N5
N8
P13
P14
P16
P18
P19
P21
P3
P4
R25
R7
R8
T11
U22
U23
U24
U27
V14
V16
V18
V28
V29
W13
W2
W23
W25
W26
W28
W30
W4
W5
W6
W7
Y28
Y3
Y4
Zdiff = 85 Ohm ? 0%
s ignal / s pace : 6 / 6 m ils
le ngth < 6400 m ils
U13A
REV = 1.1
[8]
[8]
[8]
[8]
C176
C177
C179
C178
DMI_ICH_IT_MR0_DP
DMI_ICH_IT_MR0_DN
DMI_ICH_IT_MR1_DP
DMI_ICH_IT_MR1_DN
0.1u_10V_X7R_04
0.1u_10V_X7R_04
0.1u_10V_X7R_04
0.1u_10V_X7R_04
DMI_RXP_0
DMI_RXN_0
DMI_RXP_1
DMI_RXN_1
F3
F2
H4
G3
N7
N6
[7] CLK_CPU_EXP#
[7] CLK_CPU_EXP
R10
R9
N10
N9
K2
J1
M4
L3
DMI_RXP_0
DMI_RXN_0
DMI_RXP_1
DMI_RXN_1
DMI_TXP_0
DMI_TXN_0
DMI_TXP_1
DMI_TXN_1
DMI
EXP_CLKINN
EXP_CLKINP
RSVD
RSVD
RSVD
RSVD
RSVD_K2
RSVD_J1
RSVD_M4
RSVD_L3
EXP_RCOMPO
EXP_ICOMPI
EXP_RBIAS
PINE_VIEW_M
RSVD_TP
RSVD_TP
RSVD_K3
RSVD_L2
RSVD_M2
RSVD_N2
1 OF 6
G2
G1
H3
J2
DMI_TXP_0
DMI_TXN_0
DMI_TXP_1
DMI_TXN_1
R120
R121
R123
R125
*10mil_short
*10mil_short
*10mil_short
*10mil_short
DMI_ICH_MT_IR0_DP
DMI_ICH_MT_IR0_DN
DMI_ICH_MT_IR1_DP
DMI_ICH_MT_IR1_DN
[8]
[8]
[8]
[8]
L10 EXP_RCOMPO
L9
L8 EXP_RBIAS
N11
P11
LAYOUT NOTE:
R26
R25
< 500 m ils to MCH ball
750_1%_04
49.9_1%_04
K3
L2
M2
N2
(2)
CRT Sync Signal Group
DAC_HSYNC,DAC_VSYNC
Zo = 50 Ohm ? 5%
signal : 5 m ils
le ngth < 14500 m ils
PINEVIEW-M
U13C
(1)
CRT DAC Signal Group
CRT_RED,CRT_GREEN,CRT_BLUE
VGA RGB re s is tors cols e to M CH ball
Zo = 37.5 Ohm ? 5%
s ignal : 9 m ils
length < 800 m ils
Tw o VGA RGB res istors be tw e en
Zo = 50 Ohm ? 5%
s ignal : 5 m ils
length < 14000 m ils
(3)
CRT Contr ol Signal Group
CRT_DDC_CLK,CRT_DDC_DATA
Zo = 50 Ohm ? 5%
s ignal : 5 m ils
le ngth < 15100 m ils
REV = 1.1
[2,7] CLK_BSEL0
[2,7] CLK_BSEL1
[2,7] CLK_BSEL2
R16
R111
R10
T29
T1
*1K_04 Z0301
*1K_04 Z0302
*1K_04 Z0303
XDP_RSVD_03
XDP_RSVD_04
XDP_RSVD_05
T30
XDP_RSVD_07
XDP_RSVD_09
XDP_RSVD_11
T31
T9
R98
*1K_04
XDP_RSVD_05
R112
1K_04
XDP_RSVD_09
R99
*1K_04
XDP_RSVD_11
R113
*1K_04
XDP_RSVD_17
XDP_RSVD_16
XDP_RSVD_17
Z0304
D12
A7
D6
C5
C7
C6
D8
B7
A9
D9
C8
B8
C10
D10
B11
B10
B12
C11
L11
AA7
AA6
R5
R6
AA21
W21
T21
V21
XDP_RSVD_00
XDP_RSVD_01
XDP_RSVD_02
XDP_RSVD_03
XDP_RSVD_04
XDP_RSVD_05
XDP_RSVD_06
XDP_RSVD_07
XDP_RSVD_08
XDP_RSVD_09
XDP_RSVD_10
XDP_RSVD_11
XDP_RSVD_12
XDP_RSVD_13
XDP_RSVD_14
XDP_RSVD_15
XDP_RSVD_16
XDP_RSVD_17
RSVD
CRT_HSY NC
CRT_VSY NC
CRT_RED
CRT_GREEN
CRT_BLUE
CRT_IRTN
N31 DAC_RED
P30 DAC_GREEN
P29 DAC_BLUE
N30
DAC_HSY NC [13]
DAC_VSY NC [13]
DAC_RED [13]
DAC_GREEN [13]
DAC_BLUE [13]
(2)
3.3VS
PM_EXTTS#0
(1)
PM_DPRSLPVR
VGA
CRT_DDC_DATA
CRT_DDC_CLK
DAC_IREF
DPL_REFCLKINP
DPL_REFCLKINN
DPL_REFSSCLKINP
DPL_REFSSCLKINN
L31
L30
DAC_DDCADATA [13]
DAC_DDCACLK [13]
P28 DACREFSET
Y 30
Y 29
AA30
AA31
MISC
HPL_CLKINN
HPL_CLKINP
R122
10K_04
R129
*10K_04
3/18
CLK_DREF [7]
CLK_DREF# [7]
CLK_DREFSS [7]
CLK_DREFSS# [7]
(3)
DAC_RED
R124
150_1%_04
DAC_GREEN
R127
150_1%_04
DAC_BLUE
R126
150_1%_04
LAYOUT NOTE:
Place VGA RGB res istors clos e to M CH
< 800 m ils to M CH ball
PINE_VIEW_M
PM_EXTTS#_1/DPRSLPVR
PM_EXTTS#_0
PWROK
RSTINB
RSVD_TP
RSVD_TP
RSVD_TP
RSVD_TP
M30
M29
K29 PM_DPRSLPVR
J30 PM_EXTTS#0
L5
AA3
W8
W9
PM_DPRSLPVR [10,21]
PM_EXTTS#0 [6]
IMVP6_PWRGD [10,21]
PLTRST# [8,10]
DACREFSET
R28
Place DACREFSET r es istor close to MCH
< 500 m ils to M CH ball
RSVD_TP
RSVD_TP
RSVD_TP
RSVD_TP
3 OF 6
T29
PINEVIEW-M
6 OF 6
PINEVIEW-M
[2,5,6,7,8,9,10,11,12,13,14,15,17,20,21] 3.3VS
B - 4 Pineview CPU Part A-C-F
665_1%_04
LAYOUT NOTE:
CLK_CPU_HPL# [7]
CLK_CPU_HPL [7]
Schematic Diagrams
Pineview CPU Part B
[6]
U 13B
M_A_A[14:0]
M_A_A0
M_A_A1
M_A_A2
M_A_A3
M_A_A4
M_A_A5
M_A_A6
M_A_A7
M_A_A8
M_A_A9
M_A_A10
M_A_A11
M_A_A12
M_A_A13
M_A_A14
1.5V
LAYOUT NOTE:
Place resis tors and CAP
R132 clos e to DDR_VREF pin
1K_1%_04
[6]
[6]
[6]
M_A_WE#
M_A_CAS#
M_A_RAS#
[6]
[6]
[6]
M_A_BS0
M_A_BS1
M_A_BS2
AH19
AJ18
AK18
AK16
AJ14
AH14
AK14
AJ12
AH13
AK12
AK20
AH12
AJ11
AJ24
AJ10
AK22
AJ22
AK21
M_A_BS0
M_A_BS1
M_A_BS2
AJ20
AH20
AK11
M_CS0#
M_CS1#
AH22
AK25
AJ21
AJ25
REV = 1.1
DDR _A_DQ_0
DDR _A_DQ_1
DDR _A_DQ_2
DDR _A_DQ_3
DDR _A_DQ_4
DDR _A_DQ_5
DDR _A_DQ_6
DDR _A_DQ_7
DD R_A_DQS_1
DD R_A_DQSB_1
DDR _A_DM_1
DDR _A_DQ_8
DDR _A_DQ_9
D DR_A_DQ_10
D DR_A_DQ_11
D DR_A_DQ_12
D DR_A_DQ_13
D DR_A_DQ_14
D DR_A_DQ_15
DDR _A_W EB
DDR _A_CASB
DDR _A_RASB
DDR _A_BS_0
DDR _A_BS_1
DDR _A_BS_2
DD R_A_DQS_2
DD R_A_DQSB_2
DDR _A_DM_2
R130
1K_1%_04
C194
0.1u_6.3V_X5R_06
MCH_VREF
LAYOUT NOTE:
[6]
[6]
M_CS0#
M_CS1#
[6]
[6]
M_CKE0
M_CKE1
[6]
[6]
M_ODT0
M_ODT1
M_CKE0
M_CKE1
AH10
AH 9
AK10
AJ8
M_ODT0
M_ODT1
AK24
AH26
AH24
AK27
Place resis tors and CAP close
to DDR_RPU pin
1.5V
R34
C50
R131
80.6_1%_04
MCH _D DR_RPU
0.01u_50V_X7R _04
80.6_1%_04
AG15
AF15
AD13
AC13
[6] M_C LK_DDR0
[6] M_C LK_DDR0#
[6] M_C LK_DDR1
[6] M_C LK_DDR1#
AC15
AD15
AF13
AG13
MCH _D DR_RPD
AD17
AC17
AB15
AB17
AB4
AK8
[10] DDR 3_DRAM_PWROK
[6] D DR3_DR AMRST#
T11
T12
CPU_RSVD_TP_03 AB11
CPU_RSVD_TP_04 AB13
MCH_VREF
MCH_DDR _R PD
MCH_DDR _R PU
AL28
AK28
AJ26
AK29
DDR _A_CSB_0
DDR _A_CSB_1
DDR _A_CSB_2
DDR _A_CSB_3
DDR _A_CKE_0
DDR _A_CKE_1
DDR _A_CKE_2
DDR _A_CKE_3
DD R_A_DQS_0
DD R_A_DQSB_0
DDR _A_DM_0
PINE_VIEW_M
DDR _A_ODT_0
DDR _A_ODT_1
DDR _A_ODT_2
DDR _A_ODT_3
D DR_A_DQ_16
D DR_A_DQ_17
D DR_A_DQ_18
D DR_A_DQ_19
D DR_A_DQ_20
D DR_A_DQ_21
D DR_A_DQ_22
D DR_A_DQ_23
DD R_A_DQS_3
DD R_A_DQSB_3
DDR _A_DM_3
D DR_A_DQ_24
D DR_A_DQ_25
D DR_A_DQ_26
D DR_A_DQ_27
D DR_A_DQ_28
D DR_A_DQ_29
D DR_A_DQ_30
D DR_A_DQ_31
DDR _A_CK_0
DDR _A_CKB_0
DDR _A_CK_1
DDR _A_CKB_1
DDR _A_CK_3
DDR _A_CKB_3
DDR _A_CK_4
DDR _A_CKB_4
DD R_A_DQS_4
DD R_A_DQSB_4
DDR _A_DM_4
D DR_A_DQ_32
D DR_A_DQ_33
D DR_A_DQ_34
D DR_A_DQ_35
D DR_A_DQ_36
D DR_A_DQ_37
D DR_A_DQ_38
D DR_A_DQ_39
RSVD_AD17
RSVD_AC17
RSVD_AB15
RSVD_AB17
DD R_A_DQS_5
DD R_A_DQSB_5
DDR _A_DM_5
VSS
RSVD
D DR_A_DQ_40
D DR_A_DQ_41
D DR_A_DQ_42
D DR_A_DQ_43
D DR_A_DQ_44
D DR_A_DQ_45
D DR_A_DQ_46
D DR_A_DQ_47
RSVD_TP
RSVD_TP
DDR _VREF
DDR _R PD
DDR _R PU
RSVD
DD R_A_DQS_6
DD R_A_DQSB_6
DDR _A_DM_6
DDR_A
D DR_A_DQ_48
D DR_A_DQ_49
D DR_A_DQ_50
D DR_A_DQ_51
D DR_A_DQ_52
D DR_A_DQ_53
D DR_A_DQ_54
D DR_A_DQ_55
DD R_A_DQS_7
DD R_A_DQSB_7
DDR _A_DM_7
2 OF 6
D DR_A_DQ_56
D DR_A_DQ_57
D DR_A_DQ_58
D DR_A_DQ_59
D DR_A_DQ_60
D DR_A_DQ_61
D DR_A_DQ_62
D DR_A_DQ_63
AD 3
AD 2
AD 4
AC 4
AC 1
AF4
AG2
AB2
AB3
AE2
AE3
AB8
AD 7
AA9
AB6
AB7
AE5
AG5
AA5
AB5
AB9
AD 6
AD 8
AD 10
AE8
AG8
AG7
AF10
AG11
AF7
AF8
AD 11
AE10
AK5
AK3
AJ3
AH 1
AJ2
AK6
AJ7
AF3
AH 2
AL5
AJ6
AG22
AG21
AD 19
AE19
AG19
AF22
AD 22
AG17
AF19
AE21
AD 21
AE26
AG27
AJ27
AE24
AG25
AD 25
AD 24
AC 22
AG24
AD 27
AE27
AE30
AF29
AF30
AG31
AG30
AD 30
AD 29
AJ30
AJ29
AE29
AD 28
AB27
AA27
AB26
AA24
AB25
W24
W22
AB24
AB23
AA23
W27
M_A_D QS0 [6]
M_A_D QS0# [6]
M_A_D M0 [6]
M_A_DQ[63:0] [6]
M_A_DQ0
M_A_DQ1
M_A_DQ2
M_A_DQ3
M_A_DQ4
M_A_DQ5
M_A_DQ6
M_A_DQ7
M_A_DQS1 [6]
M_A_DQS1# [6]
M_A_DM1 [6]
M_A_DQ8
M_A_DQ9
M_A_DQ10
M_A_DQ11
M_A_DQ12
M_A_DQ13
M_A_DQ14
M_A_DQ15
M_A_D QS2 [6]
M_A_D QS2# [6]
M_A_D M2 [6]
M_A_DQ16
M_A_DQ17
M_A_DQ18
M_A_DQ19
M_A_DQ20
M_A_DQ21
M_A_DQ22
M_A_DQ23
Sheet 4 of 26
Pineview CPU Part
B
M_A_D QS3 [6]
M_A_D QS3# [6]
M_A_D M3 [6]
M_A_DQ24
M_A_DQ25
M_A_DQ26
M_A_DQ27
M_A_DQ28
M_A_DQ29
M_A_DQ30
M_A_DQ31
M_A_D QS4 [6]
M_A_D QS4# [6]
M_A_D M4 [6]
M_A_DQ32
M_A_DQ33
M_A_DQ34
M_A_DQ35
M_A_DQ36
M_A_DQ37
M_A_DQ38
M_A_DQ39
M_A_D QS5 [6]
M_A_D QS5# [6]
M_A_D M5 [6]
M_A_DQ40
M_A_DQ41
M_A_DQ42
M_A_DQ43
M_A_DQ44
M_A_DQ45
M_A_DQ46
M_A_DQ47
M_A_D QS6 [6]
M_A_D QS6# [6]
M_A_D M6 [6]
M_A_DQ48
M_A_DQ49
M_A_DQ50
M_A_DQ51
M_A_DQ52
M_A_DQ53
M_A_DQ54
M_A_DQ55
M_A_D QS7 [6]
M_A_D QS7# [6]
M_A_D M7 [6]
M_A_DQ56
M_A_DQ57
M_A_DQ58
M_A_DQ59
M_A_DQ60
M_A_DQ61
M_A_DQ62
M_A_DQ63
[10,12,13,15,16,17,18] VDD3
[5,6,17,19] 1.5V
PIN EVIEW-M
Pineview CPU Part B B - 5
B.Schematic Diagrams
M_A_W E#
M_A_CAS#
M_A_RAS#
DDR _A_MA_0
DDR _A_MA_1
DDR _A_MA_2
DDR _A_MA_3
DDR _A_MA_4
DDR _A_MA_5
DDR _A_MA_6
DDR _A_MA_7
DDR _A_MA_8
DDR _A_MA_9
DDR _A_MA_10
DDR _A_MA_11
DDR _A_MA_12
DDR _A_MA_13
DDR _A_MA_14
Schematic Diagrams
Pineview CPU Part E
U13E
VCORE
REV = 1.1
PINE_VIEW_M
3A
C34
C28
C38
C37
C39
1u_6.3V_X5R_04
1u_6.3V_X5R_04
1u_6.3V_X5R_04
C25
C27
C36
C26
1u_6.3V_X5R_04
1u_6.3V_X5R_04
1u_6.3V_X5R_04
1u_6.3V_X5R_04
*10u_6.3V_X5R_06 2.2u_6.3V_X5R_04
T13
T14
T16
T18
T19
V13
V19
W14
W16
W18
W19
VCCGFX
VCCGFX
VCCGFX
VCCGFX
VCCGFX
VCCGFX
VCCGFX
VCCGFX
VCCGFX
VCCGFX
VCCGFX
GFX/MCH
0.89V_GFX
1.5V
C48
C44
*2.2u_6.3V_X5R_04 2.2u_6.3V_X5R_04
2.2u_6.3V_X5R_04
C47
C49
2.2u_6.3V_X5R_04
2.2u_6.3V_X5R_04
AK13
AK19
AK9
AL11
AL16
AL21
AL25
VCCSM
VCCSM
VCCSM
VCCSM
VCCSM
VCCSM
VCCSM
L36
*HCB1005KF-121T20_short
VCCCK_DDR_SENSE AK7
AL7
C192
C193
22u_6.3V_X5R_08
*0.1u_16V_Y5V_04
1.05VS
1.32A
C32
C33
C31
10u_6.3V_X5R_06
4.7u_6.3V_X5R_06
1u_6.3V_X5R_04
U10
U5
U6
U7
U8
U9
V2
V3
V4
W10
W11
AA10
AA11
C30
POWER
1.5V
VCCCK_DDR
VCCCK_DDR
VCCA_DDR
VCCA_DDR
VCCA_DDR
VCCA_DDR
VCCA_DDR
VCCA_DDR
VCCA_DDR
VCCA_DDR
VCCA_DDR
VCCA_DDR
VCCA_DDR
VCCSENSE
VSSSENSE
DDR
Sheet 5 of 26
Pineview CPU Part
E
CPU
C45
VCCA
VCC
VCCP
VCCP
C191
C190
1u_6.3V_X5R_04
1u_6.3V_X5R_04
VCCD_AB_DPL
48mA
V11
AC31
155mA
VCCACRTDAC
C248
C20
*22u_6.3V_X5R_08
1u_10V_06
T30
VCCD_HMPLL
VCCACRTDAC
330mA
1.05VS
L25
*HCB1005KF-121T20_short
VCC_LGI_VID
B - 6 Pineview CPU Part E
10mA
VCCF_RING
C174
C14
*1u_6.3V_X5R_04
1u_6.3V_X5R_04
T31
J31
C3
B2
C2
A21
C170
C175
C168
C16
1u_10V_06
1u_10V_06
1u_10V_06
1u_10V_06
VCCSENSE [21]
VSSSENSE [21]
1.5VS
L30
*HCB1005KF-121T20_short
110mA
VCCA_1.5V
C183
C185
C182
*1u_6.3V_X5R_04
*1u_6.3V_X5R_04
0.01u_50V_X7R_04
1.05VS
L3
*HCB1005KF-121T20_short
VCCPC6
V30
W31
VCCF_RING
L32
*HCB1005KF-121T20_short
VCCA_LVD
80mA
1.8VS
L34
*HCB1005KF-121T20_short
VCCA_VCCD_LVD
C189
C188
22u_6.3V_X5R_08
1u_6.3V_X5R_04
VCORE
VCCSENSE R2
VSSSEN SE R3
10_1%_04
10_1%_04
1.05VS
480mA
VCCA_DMI
VCCA_DMI
VCCA_DMI
RSVD
T1
T2
T3
P2
C23
C22
1u_6.3V_X5R_04
1u_6.3V_X5R_04
63mA
VCCSFR_DMIHMPLL
VCC_GIO
VCCRING_EAST
VCCRING_WEST
VCCRING_WEST
VCCRING_WEST
VCC_LGI_VID
C9
*10u_6.3V_X5R_06
VCCSFR_AB_DPL
3.3VS
1.05VS
VCCALVD
VCCDLVD
B4
B3
LVDS
AA19
DMI
1.8VS
L5
FCM1005KF-102T02
41mA
VCCSFR_AB_DPL
D4
C10
C15
C29
B29
Y2
C8
*0.1u_16V_Y 5V_04 *0.1u_16V_Y 5V_04 *0.1u_16V_Y5V_04 *0.1u_16V_Y 5V_04
0.1u_16V_Y 5V_04
C29
63mA
C11
C7
*0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04
1.8VS
L35
HCB1005KF-121T20
A23
A25
A27
B23
B24
B25
B26
B27
C24
C26
D23
D24
D26
D28
E22
E24
E27
F21
F22
F25
G19
G21
G24
H17
H19
H22
H24
J17
J19
J21
J22
K15
K17
K21
L14
L16
L19
L21
N14
N16
N19
N21
VCCACK_DDR
VCCACK_DDR
EXP\CRT\PLL
B.Schematic Diagrams
2.27A
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
VCC
AA1
3/16
1.8VS
L33
*HCB1005KF-121T20_short
VCCSFR_DMIHMPLL
C187
1u_6.3V_X5R_04
5 OF 6
VCCP
E2
L26
1.05VS
*HCB1608KF-121T25_short
VCCF_RING
C171
C172
1u_6.3V_X5R_04
1u_6.3V_X5R_04
PINEVIEW-M
[4,6,17,19]
[2,3,6,7,8,9,10,11,12,13,14,15,17,20,21]
[17]
[8,11,17]
[2,7,9,10,11,20]
[21]
[20]
1.5V
3.3VS
1.8VS
1.5VS
1.05VS
VCORE
0.89V_GFX
Schematic Diagrams
DDRIII SO-DIMM_0
SO-DIMM 0
[4]
M_A_A[14:0]
M_A_A0
M_A_A1
M_A_A2
M_A_A3
M_A_A4
M_A_A5
M_A_A6
M_A_A7
M_A_A8
M_A_A9
M_A_A10
M_A_A11
M_A_A12
M_A_A13
M_A_A14
R193
10K_04
SA0_DIM0
SA1_DIM0
[7,10] SMBCLK0
[7,10] SMBDAT0
R194
10K_04
[4]
[4]
M_ODT0
M_ODT1
[4]
[4]
[4]
[4]
[4]
[4]
[4]
[4]
M_A_DM0
M_A_DM1
M_A_DM2
M_A_DM3
M_A_DM4
M_A_DM5
M_A_DM6
M_A_DM7
[4]
[4]
[4]
[4]
[4]
[4]
[4]
[4]
M_A_DQS0
M_A_DQS1
M_A_DQS2
M_A_DQS3
M_A_DQS4
M_A_DQS5
M_A_DQS6
M_A_DQS7
[4]
[4]
[4]
[4]
[4]
[4]
[4]
[4]
M_A_DQS0#
M_A_DQS1#
M_A_DQS2#
M_A_DQS3#
M_A_DQS4#
M_A_DQS5#
M_A_DQS6#
M_A_DQS7#
J_DIMM1A
A0
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10/AP
A11
A12/BC#
A13
A14
A15
109
108
79
114
121
101
103
102
104
73
74
115
110
113
197
201
202
200
BA0
BA1
BA2
S0#
S1#
CK0
CK0#
CK1
CK1#
CKE0
CKE1
CAS#
RAS#
WE#
SA0
SA1
SCL
SDA
116
120
M_A_DM0
M_A_DM1
M_A_DM2
M_A_DM3
M_A_DM4
M_A_DM5
M_A_DM6
M_A_DM7
11
28
46
63
136
153
170
187
M_A_DQS0
M_A_DQS1
M_A_DQS2
M_A_DQS3
M_A_DQS4
M_A_DQS5
M_A_DQS6
M_A_DQS7
12
29
47
64
137
154
171
188
M_A_DQS0#
M_A_DQS1#
M_A_DQS2#
M_A_DQS3#
M_A_DQS4#
M_A_DQS5#
M_A_DQS6#
M_A_DQS7#
10
27
45
62
135
152
169
186
DQ0
DQ1
DQ2
DQ3
DQ4
DQ5
DQ6
DQ7
DQ8
DQ9
DQ10
DQ11
DQ12
DQ13
DQ14
DQ15
DQ16
DQ17
DQ18
DQ19
DQ20
DQ21
DQ22
DQ23
DQ24
DQ25
DQ26
DQ27
DQ28
DQ29
DQ30
DQ31
DQ32
DQ33
DQ34
DQ35
DQ36
DQ37
DQ38
DQ39
DQ40
DQ41
DQ42
DQ43
DQ44
DQ45
DQ46
DQ47
DQ48
DQ49
DQ50
DQ51
DQ52
DQ53
DQ54
DQ55
DQ56
DQ57
DQ58
DQ59
DQ60
DQ61
DQ62
DQ63
ODT0
ODT1
DM0
DM1
DM2
DM3
DM4
DM5
DM6
DM7
DQS0
DQS1
DQS2
DQS3
DQS4
DQS5
DQS6
DQS7
DQS0#
DQS1#
DQS2#
DQS3#
DQS4#
DQS5#
DQS6#
DQS7#
5
7
15
17
4
6
16
18
21
23
33
35
22
24
34
36
39
41
51
53
40
42
50
52
57
59
67
69
56
58
68
70
129
131
141
143
130
132
140
142
147
149
157
159
146
148
158
160
163
165
175
177
164
166
174
176
181
183
191
193
180
182
192
194
M_A_DQ[63:0] [4]
M_A_DQ0
M_A_DQ1
M_A_DQ2
M_A_DQ3
M_A_DQ4
M_A_DQ5
M_A_DQ6
M_A_DQ7
M_A_DQ8
M_A_DQ9
M_A_DQ10
M_A_DQ11
M_A_DQ12
M_A_DQ13
M_A_DQ14
M_A_DQ15
M_A_DQ16
M_A_DQ17
M_A_DQ18
M_A_DQ19
M_A_DQ20
M_A_DQ21
M_A_DQ22
M_A_DQ23
M_A_DQ24
M_A_DQ25
M_A_DQ26
M_A_DQ27
M_A_DQ28
M_A_DQ29
M_A_DQ30
M_A_DQ31
M_A_DQ32
M_A_DQ33
M_A_DQ34
M_A_DQ35
M_A_DQ36
M_A_DQ37
M_A_DQ38
M_A_DQ39
M_A_DQ40
M_A_DQ41
M_A_DQ42
M_A_DQ43
M_A_DQ44
M_A_DQ45
M_A_DQ46
M_A_DQ47
M_A_DQ48
M_A_DQ49
M_A_DQ50
M_A_DQ51
M_A_DQ52
M_A_DQ53
M_A_DQ54
M_A_DQ55
M_A_DQ56
M_A_DQ57
M_A_DQ58
M_A_DQ59
M_A_DQ60
M_A_DQ61
M_A_DQ62
M_A_DQ63
J_DIMM1B
1.5V
3.3VS
C212
C122
.1U_16V_04
.1U_16V_04
75
76
81
82
87
88
93
94
99
100
105
106
111
112
117
118
123
124
199
77
122
125
[3] PM_EXTTS#0
[4] DDR3_DRAMRST#
1.5V
198
30
CLOSE TO SO-DIMM_0
R74
1K_1%_04
R71
1
126
C111
C101
C216
1K_1%_04 .1U_10V_X7R_04 2.2u_16V_X5R_06
C169
.1U_16V_04 2.2u_16V_X5R_06
3/18
3/18
2
3
8
9
13
14
19
20
25
26
31
32
37
38
43
VDD1
VDD2
VDD3
VDD4
VDD5
VDD6
VDD7
VDD8
VDD9
VDD10
VDD11
VDD12
VDD13
VDD14
VDD15
VDD16
VDD17
VDD18
VDDSPD
NC1
NC2
NCTEST
EVENT#
RESET#
VREF_DQ
VREF_CA
VSS1
VSS2
VSS3
VSS4
VSS5
VSS6
VSS7
VSS8
VSS9
VSS10
VSS11
VSS12
VSS13
VSS14
VSS15
VSS16
VSS17
VSS18
VSS19
VSS20
VSS21
VSS22
VSS23
VSS24
VSS25
VSS26
VSS27
VSS28
VSS29
VSS30
VSS31
VSS32
VSS33
VSS34
VSS35
VSS36
VSS37
VSS38
VSS39
VSS40
VSS41
VSS42
VSS43
VSS44
VSS45
VSS46
VSS47
VSS48
VSS49
VSS50
VSS51
VSS52
44
48
49
54
55
60
61
65
66
71
72
127
128
133
134
138
139
144
145
150
151
155
156
161
162
167
168
172
173
178
179
184
185
189
190
195
196
Sheet 6 of 26
DDRIII SO-DIMM_0
VTT_MEM
VTT1
VTT2
G1
G2
203
204
GND1
GND2
AS0A621-U2SN-7F
AS0A621-U2SN-7F
1.5V
C270
C274
C241
C279
C289
C208
C287
C268
220U_4V_D
*10U_6.3V_08
*10U_6.3V_08
*10U_6.3V_08
*1U_6.3V_04
*1U_6.3V_04
*1U_6.3V_04
*1U_6.3V_04
+
VTT_MEM
1.5V
3/15
C276
C271
C275
C273
C284
C281
C286
C242
C285
C283
.1U_16V_04
.1U_16V_04
.1U_16V_04
.1U_16V_04
.1U_16V_04
.1U_16V_04
.1U_16V_04
.1U_16V_04
.1U_16V_04
.1U_16V_04
C280
C278
C255
C267
C282
*10U_6.3V_06
1U_6.3V_04
1U_6.3V_04
1U_6.3V_04
1U_6.3V_04
[2,3,5,7,8,9,10,11,12,13,14,15,17,20,21] 3.3VS
[4,5,17,19]
1.5V
[19]
VTT_MEM
DDRIII SO-DIMM_0 B - 7
B.Schematic Diagrams
[4] M_A_BS0
[4] M_A_BS1
[4] M_A_BS2
[4] M_CS0#
[4] M_CS1#
[4] M_CLK_DDR0
[4] M_CLK_DDR0#
[4] M_CLK_DDR1
[4] M_CLK_DDR1#
[4] M_CKE0
[4] M_CKE1
[4] M_A_CAS#
[4] M_A_RAS#
[4] M_A_WE#
98
97
96
95
92
91
90
86
89
85
107
84
83
119
80
78
Schematic Diagrams
Clock Generator
59
X1
VD DPCI
VD D 48
VDD PLL3
VDD SR C
VD DC PU
VD D REF
CPU0
CPU0#
X2
R54
CLK_ICH48
[10]
R39
CLK_ICH14
33_04
33_04
FSLA
FSLB
57
FSLC
62
37
38
[10] PM_STPCPU#
[10] PM_STPPCI#
Sheet 7 of 26
Clock Generator
Zo = 55 Ohm ? 5%
s ignal : 4 m ils
[15]
10
SRC4
SRC4#
R51
KBC_PCLK
33_04
KBC_CLK
OVER_CLK#
5
4
3
1
SRC_1
[8]
PCLK_ICH
[6,10]
[6,10]
SMBCLK0
SMBDAT0
R53
33_04
SRC_8
6
7
64
63
R36
CK_PWRGD 56
SRC11/CR#_H
SRC11#/CR#_G
REF0/FSLC/EST_SEL
SRC7/CR#_F
SRC7#/CR#_E
CPU_STOP#
PCI_STOP#
SRC9
SRC9#
PCI3
SRC2/SATA
SRC2#/SATA#
PCI2/TME
SRC6
SRC6#
SRC10
SRC10#
PCI0/CR#_A
PCI4/27_Select
SRC8/ITP
SRC8#/ITP#
CLKEN#
G
SCLK
SDATA
27MHz_NonSS/SRC1/SE1
27MHz_SS/SRC1#/SE2
C 42
10u_6.3V_X5R _06
C43
1u_10V_06
C 62
0.1u_16V_Y5V_04
C 69
0.1u_16V_Y5V_04
C 54
0.1u_16V_Y5V_04
C70
0.1u_16V_Y5V_04
CLK_CPU_BCLK [2]
CLK_CPU_BCLK# [2]
27
28
24
25
33
32
CLK_PCIE_ICH [8]
CLK_PCIE_ICH# [8]
Z0701 R45
470_04
WLAN_CLKREQ# [13]
44
43
30
31
21
22
41
40
CLK_PCIE_WLAN [13]
CLK_PCIE_WLAN# [13]
CLK_SATA [9]
CLK_SATA# [9]
CLK_PCIE_JMC261 [13]
CLK_PCIE_JMC261# [13]
Zo = 50 Ohm ? 5%
s ignal : 5 m ils
Zdiff = 92 Ohm ? 0%
s ignal / s pace : 4 /
5.5 m ils
34
35
CLK_CPU_EXP [3]
CLK_CPU_EXP# [3]
47
46
17
18
CLK_DREFSS [3]
CLK_DREFSS# [3]
SRC0/DOTT_96
SRC0#/DOTC_96
13
14
CLK_DREF [3]
CLK_DREF# [3]
RTM875T-606-VD-GRT
XTAL_IN
PN: 6-02-08510-EL0
SLG8SP510T
X1
1
CLK_CPU_HPL [3]
CLK_CPU_HPL# [3]
54
53
CK_PWRGD/PD#
8
11
15
19
23
29
42
52
58
PLACE CRYSTAL WITHIN
500 M ILS OF CK505
Q1
MTN7002ZHS3
51
50
PCIF5/ITP_EN
GN DPCI
GN D48
GND
GND
GN DSRC 1
GN DSRC 2
GND SR C3
GND C PU
GN DR EF
[21]
3.3VS
PCI1/CR#_B
D
3.3VS
10K_04
USB_48MHz/FSLA
FSLB/TEST_MODE
C 57
0.1u_16V_Y5V_04
C72
0.1u_16V_Y5V_04
XTAL_OUT
2
9
16
39
55
61
12
20
26
36
45
49
60
VD D_IO
VD DPLL3_IO
VDD SR C_IO1
VDD SR C_IO2
VD DSRC _IO3
VD DC PU _IO
XTAL_IN
NC
L7
*HCB1608KF-121T25_short
U8
CPU1
CPU1#
SRC3/CR#_C
SRC3#/CR#_D
S
B.Schematic Diagrams
48
[8]
3.3VS_CLK
C 71
0.1u_16V_Y5V_04
C68
0.1u_16V_Y5V_04
C 56
0.1u_16V_Y5V_04
C55
0.1u_16V_Y5V_04
C 58
0.1u_16V_Y5V_04
C67
0.1u_16V_Y5V_04
C51
1u_10V_06
CLOCK GENERATOR
1.05VS_CLK
L8
*HCB1608KF-121T25_short
C 46
10u_6.3V_X5R_06
1.05VS
2
XTAL_OUT
FSX8L_14.31818MHz
10 m ils
C52
C53
27p_50V_NPO_04
27p_50V_NPO_04
PN: 6-02-87560-EL0
RTM875T-606-VD-GRT
3.3VS
[2,3] CLK_BSEL0
[2,3] CLK_BSEL1
2.2K_04
FSLA
R35
1K_04
FSLB
R37
[2,3] CLK_BSEL2
B - 8 Clock Generator
R55
10K_04
FSLC
FSLB
FSLA
Hos t Clock
BSEL2
BSEL1
BSEL0
Fre que ncy
---
---
---
CPU_SEL
0
1
1
166 M Hz
FSLC
R137
10K_04
PM_STPPCI#
R141
10K_04
PM_STPCPU#
R50
10K_04
R46
*10K_04
OVER_CLK#
R47
10K_04
KBC_CLK
R48
10K_04
SRC_1
R52
10K_04
SRC_8
[2,3,5,6,8,9,10,11,12,13,14,15,17,20,21] 3.3VS
[2,5,9,10,11,20] 1.05VS
Schematic Diagrams
Tigerpoint Part A-B
USB Signal Group
Zdiff = 90 Ohm ? 5%
signal / space : 5 / 6 m ils
U14B
R23
R24
P21
P20
T21
T20
T24
T25
T19
T18
U23
U24
V21
V20
V24
V23
[3] DMI_ICH_MT_IR0_DN
[3] DMI_ICH_MT_IR0_DP
[3] DMI_ICH_IT_MR0_DN
[3] DMI_ICH_IT_MR0_DP
[3] DMI_ICH_MT_IR1_DN
[3] DMI_ICH_MT_IR1_DP
[3] DMI_ICH_IT_MR1_DN
[3] DMI_ICH_IT_MR1_DP
[13] PCIE_RXN5_CARD
[13] PCIE_RXP5_CARD
[13] PCIE_TXN5_CARD
[13] PCIE_TXP5_CARD
C200
C201
C84
C88
0.1u_10V_X7R_04
0.1u_10V_X7R_04
0.1u_10V_X7R_04
0.1u_10V_X7R_04
PCIE Signal Group
Zdiff = 100 Ohm ? 0%
signal / s pace : 4 / 7 m ils
K21
K22
Z0806J23
Z0807J24
M18
M19
K24
K25
L23
L24
Z0808L22
Z0809M21
P17
P18
N25
N24
USBP0N
USBP0P
USBP1N
USBP1P
USBP2N
USBP2P
USBP3N
USBP3P
USBP4N
USBP4P
USBP5N
USBP5P
USBP6N
USBP6P
USBP7N
USBP7P
DMI
USB
PERN1
PERP1
PETN1
PETP1
PERN2
PERP2
PETN2
PETP2
PERN3
PERP3
PETN3
PETP3
PERN4
PERP4
PETN4
PETP4
OC0#
OC1#
OC2#
OC3#
OC4#
OC5#/GPIO29
OC6#/GPIO30
OC7#/GPIO31
PCI-E
USBRBIAS
USBRBIAS#
CLK48
1.5VS
H7
H6
H3
H2
J2
J3
K6
K5
K1
K2
L2
L3
M6
M5
N1
N2
D4
C5
D3
D2
E5
E6
C2
C3
G2
G3
4/15
Z0803
Z0804
USB_PN0
USB_PP0
USB_PN1
USB_PP1
USB_PN2
USB_PP2
USB_PN3
USB_PP3
USB_PN4
USB_PP4
USB_PN5
USB_PP5
T15
T13
USB_PN7
USB_PP7
[13]
[13]
[13]
[13]
[12]
[12]
[13]
[13]
[13]
[13]
[13]
[13]
USB Port 0
USB Port 1
USB Port 2
WLAN
3G (PCIE Mini Card)
Buletooth
N.C.
CCD
[7] PCLK_ICH
[3,10] PLTRST#
[13,15]
PME#
A5
DEVSEL# B15
J12
*0_04 PCIRST# A23
B7
IRDY #
*0_04 PCI_PME# C22
B11
SERR#
F14
STOP#
A8
PLOCK#
A10
TRDY#
D10
PERR#
A16
FRAME#
R164
R165
A18
E16
[13]
[13]
8
7
6
5
1
2
3 RN19
4 10K_8P4R_04
FLASH_SEL0 G14
FLASH_SEL1 A2
C15
GPIO22
C9
GPIO1
USB_OC#7
USB_OC#2_6 R156
10K_04
USB_RBIAS
22.1_1%_04
R153
2/9
FROM 22.6_1%_04
CHANGE TO 22.1_1%_04
Zo = 50 Ohm ? 5%
signal : 5 m ils
Le ngth < 500 m il to re sistor
CLK_ICH48 [7]
LAYOUT NOTE:
R60
< 500 m ils to TPT ball
24.9_1%_04
INTA#
INTB#
INTC#
INTD#
INTE#
INTF#
INTG#
INTH#
B2
D7
B3
H10
E8
D6
H8
F8
STRAP0#
RSVD01
RSVD02
D11
K9
M13
Tigerpoint
PAR
DEVSEL#
PCICLK
PCIRST#
IRDY #
PME#
SERR#
STOP#
PLOCK#
TRDY#
PERR#
FRAME#
PCI
GNT1#
GNT2#
REQ1#
REQ2#
GPIO48/STRAP1#
GPIO17/STRAP2#
GPIO22
GPIO1
PIRQA#
PIRQB#
PIRQC#
PIRQD#
PIRQE#/GPIO2
PIRQF#/GPIO3
PIRQG#/GPIO4
PIRQH#/GPIO5
STRAP0#
RSVD01
RSVD02
1 OF 6
Z0810H24
J22
[7] CLK_PCIE_ICH#
[7] CLK_PCIE_ICH
G16
A20
REQ#1
REQ#2
USB_OC#0_1_2 [12] 3.3V
USB_OC#3
USB_OC#4
USB_OC#5
LAYOUT NOTE:
F4
USB0
USB1
USB2
USB3
USB4
USB5
USB6
USB7
W23
W24
AD0
AD1
AD2
AD3
AD4
AD5
AD6
AD7
AD8
AD9
AD10
AD11
AD12
AD13
AD14
AD15
AD16
AD17
AD18
AD19
AD20
AD21
AD22
AD23
AD24
AD25
AD26
AD27
AD28
AD29
AD30
AD31
C/BE0#
C/BE1#
C/BE2#
C/BE3#
B22
D18
C17
C18
B17
C19
B18
B19
D16
D15
A13
E14
H14
L14
J14
E10
C11
E12
B9
B13
L12
B8
A3
B5
A6
G12
H12
C8
D9
C7
C1
B1
Sheet 8 of 26
Tigerpoint Part A-B
H16
M15
C13
L16
NM10-EXPRESS
DMI_ZCOMP
DMI_IRCOMP
DMI_CLKN
DMI_CLKP
4/15
2 OF 6
3.3V
NM10-EXPRESS
3.3VS
8
7
6
5
8
7
6
5
8
7
6
5
8
7
6
5
8
7
6
5
8
7
6
5
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
RN7
8.2K_8P4R_04
RN21
8.2K_8P4R_04
RN6
8.2K_8P4R_04
RN22
8.2K_8P4R_04
RN24
8.2K_8P4R_04
REQ#2
RSVD02
INTD#
RSVD01
SERR#
GPIO22
DEVSEL#
FRAME#
PERR#
INTG#
INTH#
INTE#
INTA#
INTC#
INTF#
IRDY #
INTB#
PLOCK#
GPIO1
TRDY#
REQ#1
STOP#
R160
*10K_04
PCI_PME#
R161
R158
*1K_04
*1K_04
FLASH_SEL0
FLASH_SEL1
R162
*1K_04
STRAP0#
TOP BLOCK SWAP OVERRIDE
FLASH_SEL1
FLASH_SEL0
GPIO17/STRAP2# GPIO48/STRAP1#
MODE
0
1
SPI
1
0
PCI
1
1
LPC
RN8
8.2K_8P4R_04
[2,10,11,12,13,17,18,19] 3.3V
[2,3,5,6,7,9,10,11,12,13,14,15,17,20,21] 3.3VS
[5,11,17] 1.5VS
Tigerpoint Part A-B B - 9
B.Schematic Diagrams
[13] PCIE_RXN1_WLAN
[13] PCIE_RXP1_WLAN
[13] PCIE_TXN1_WLAN
[13] PCIE_TXP1_WLAN
U14A
Tigerpoint
DMI0RXN
DMI0RXP
DMI0TXN
DMI0TXP
DMI1RXN
DMI1RXP
DMI1TXN
DMI1TXP
DMI2RXN
DMI2RXP
DMI2TXN
DMI2TXP
DMI3RXN
DMI3RXP
DMI3TXN
DMI3TXP
Schematic Diagrams
Tigerpoint Part C
SATA Signal Group
Zdiff = 92 Ohm ? 0%
signal / space : 4 / 5.5 m ils
B.Schematic Diagrams
U14C
R12
AE20
AD17
AC15
AD18
Y 12
AA10
AA12
Y 10
AD15
W10
V12
AE21
AE18
AD19
U12
AC17
AB13
AC13
AB15
Y 14
Sheet 9 of 26
Tigerpoint Part C
AB16
AE24
AE23
RSVD03
RSVD04
RSVD05
RSVD06
RSVD07
RSVD08
RSVD09
RSVD10
RSVD11
RSVD12
RSVD13
RSVD14
RSVD15
RSVD16
RSVD17
RSVD18
Tigerpoint
SATA0RXN
SATA0RXP
SATA0TXN
SATA0TXP
SATA1RXN
SATA1RXP
SATA1TXN
SATA1TXP
AE6
AD6
AC7
AD7
AE8
AD8
AD9
AC9
SATARXN0 [12]
SATARXP0 [12]
SATATXN0 [12]
SATATXP0 [12]
SATA
SATA_CLKN
SATA_CLKP
RSVD19
RSVD20
RSVD21
RSVD22
RSVD23
SATARBIAS#
SATARBIAS
SATALED#
AD4
AC4
AD11
AC11
AD25
CLK_SATA# [7]
CLK_SATA [7]
Z0901 R136
24.9_1%_04
1.05VS
LAYOUT NOTE:
Zo = 50 Ohm ? 5%
signal : 5 m ils
Length < 500 m il to resistor
RSVD24
RSVD25
RSVD26
SATA_LED# [12]
AA14
V14
RSVD27
RSVD28
3.3VS
R143
AD16
AB11
AB10
RSVD29
RSVD30
RSVD31
10K_04
DBGSTRP_SETUP AD23
GPIO36
THE SV_DETECT
A20GATE
A20M#
CPUSLP#
IGNNE#
INIT3_3V#
INIT#
HOST
INTR
FERR#
NMI
RCIN#
SERIRQ
SMI#
STPCLK#
THERMTRIP#
3 OF 6
NM10-EXPRESS
U16
Y20
Y21
Y18
AD21
AC25
AB24
Y22
T17
AC21
AA16
AA21
V18
AA20
H_THERMTRIP#
R134
56_04
H_FERR#
R41
56_04
Place resietor close to TPT
KBC_GA20# [15]
H_A20M# [2]
H_IGNNE# [2]
H_INIT# [2]
H_INTR [2]
H_FERR# [2]
H_NMI
[2]
KBC_RST# [15]
LPC_SIRQ [15]
H_SMI# [2]
H_STPCLK# [2]
H_THERMTRIP# [2]
3.3VS
KBC_RST#
SATA_LED#
LPC_SIRQ
KBC_GA20#
8
7
6
5
1
2
3 RN17
4 10K_8P4R_04
3/12
DEL SHORT
[2,3,5,6,7,8,10,11,12,13,14,15,17,20,21] 3.3VS
[2,5,7,10,11,20] 1.05VS
B - 10 Tigerpoint Part C
Schematic Diagrams
Tigerpoint Part D
3.3V
U14D
LPC Signal Group
[15]
[15]
[15]
[15]
Zo = 55 Ohm ? 5%
signal : 4 m ils
HDA Signal Group
[15] LPC_FRAME#
Zo = 55 Ohm ? 5%
signal : 4 m ils
*1K_04
R145
*1K_04
P6
U2
W2
V2
P8
AA1
Y1
AA3
[14] AZ_BITCLK
[14] AZ_RST#
[14] AZ_SDIN0
3.3VS
R144
AA5
V6
AA6
Y5
W8
Y8
Y4
LPC_AD0
LPC_AD1
LPC_AD2
LPC_AD3
LDRQ0#
LPC_AD0
LPC_AD1
LPC_AD2
LPC_AD3
[14] AZ_SDOUT
[14] AZ_SYNC
[7] CLK_ICH14
AZ_SDOUT
PCIE PORT CONF BIT1
U3
AE2
T6
V3
AZ_SY NC
PCIE PORT CONF BIT0
R159
*10mil_short
LAN_RST#
ICH_RTCX1
ICH_RTCX2
ICH_RTCRST
R133
10M_06
W4
V5
T5
E20
SMBALERT#
ICH_SMBCLK0 H18
ICH_SMBDAT0 E23
H21
SMLALERT#
F25
SMLINK0
F24
SMLINK1
X2 MC-306_32.768KHz
1
4
2
3
3/5
X4 *MC-146_32.768KHz
1
4
2
3
C196
15p_50V_NPO_04
T4
P7
B23
AA2
AD1
AC2
W3
T7
U4
R2
T1
M8
P9
R4
C197
15p_50V_NPO_04
LPC
HDA_BIT_CLK
HDA_RST#
HDA_SDI0
HDA_SDIN1
HDA_SDIN2
HDA_SDOUT
HDA_SYNC
CLK14
AUDIO
EE_CS
EE_DIN
EE_DOUT
EE_SHCLK
LAN_CLK
LANR_STSYNC
LAN_RST#
LAN_RXD0
LAN_RXD1
LAN_RXD2
LAN_TXD0
LAN_TXD1
LAN_TXD2
RTCX1
RTCX2
RTCRST#
BM_BUSY#/GPIO0
GPIO6
GPIO7
GPIO8
GPIO9
GPIO10
GPIO12
GPIO13
GPIO14
GPIO15
DPRSLPVR
STP_PCI#
STP_CPU#
GPIO24
GPIO25
MISC
GPIO26
GPIO27
GPIO28
CLKRUN#
GPIO33
GPIO34
GPIO38
GPIO39
EPROM
CPUPWRGD/GPIO49
THRM#
VRMPWRGD
MCH_SYNC#
PWRBTN#
RI#
SUS_STAT#/LPCPD#
SUSCLK
SYS_RESET#
PLTRSTB
WAKE#
INTRUDER#
PWROK
RSMRST#
INTVRMEN
SPKR
LAN
RTC
SMBALERT#/GPIO11
SMBCLK
SMBDATA
SMB
SMLALERT#
SMLINK0
SMLINK1
SPI_MISO
SPI_MOSI
SPI_CS#
SPI_CLK
SPI_ARB
SLP_S3#
SLP_S4#
SLP_S5#
SPI
BATLOW#
DPRSTP#
DPSLP#
RSVD31
4 OF 6
T15
W16
W14
K18
H19
M17
A24
C23
P5
E24
AB20
Y16
AB19
R3
C24
D19
D20
F22
AC19
U14
AC1
AC23
AC24
GPIO0
GPIO8
GPIO9
KBC_SMI#
KBC_SWI#
GPIO13
R65
LCD_PID0
CONFIG_MODE#
PM_STPPCI#_R
R187
ICH_RI
PCIE_WAKE#
BATLOW#
GPIO9
FP_RST#
GPIO8
KBC_SMI# [15]
KBC_SWI# [15]
KBC_SCI# [15]
*10mil_short
PM_DPRSLPVR [3,21]
PM_STPPCI# [7]
PM_STPCPU# [7]
*0_04
DBG_STRAP_DET
BKLTSEL1#
SMLALERT#
SMBALERT#
SMLINK0
SMLINK1
T33
KBC_CLKRUN#
SB_BLON
AB22
H_PWRGD [2]
IMVP6_PWRGD_RR44
ICH_SYNC#
THERM_ALERT# [2,15]
IMVP6_PWRGD [3,21]
*10mil_short
SUSCLK
FP_RST#
PLTRST_R#
R152
PCIE_WAKE#
SM_INTRUDER#
ICH_PWROK_R R146
KBC_RSMRST#
ICH_INTVRMEN
ICH_SPKR
H20
E25
F21
SUSB#
SUSC#
B25
AB23
AA18
F20
BATLOW#
*10mil_short
10K_04
KBC_CLKRUN#
R142
10K_04
LDRQ0#
R49
*10K_04
ICH_SYNC#
R138
1K_04
H_DPRSTP#
R42
*56_04
H_DPSLP#
R139
*56_04
1.05VS
PLTRST# [3,8]
PCIE_WAKE# [13]
3.3VS
*10mil_short ICH_PWROK
ICH_SPKR
KBC_RSMRST# [15]
SUSB# [15,17]
SUSC# [15,19]
CONFIG_MODE#
1
PLTRST#
PLTRST#
3.3VS
R151
*10K_04
BRDID2
R149
*10K_04
R150
10K_04
R147
*10K_04
R163
1K_04
DC COUPLING SELETION
BUF_PLT_RST# [13,15]
R40
KBC_RSMRST#
R140
10K_04
ICH_PWROK
R148
10K_04
*100K_04
3/5
DDR3_DRAM_PWROK [4]
[19] 1.5V_PWRGD
R128
3.3V
3.3V
U7B
74LVC08PW
14
10K_1%_04
4
[19] 1.5V_PWRGD
6 ALL_SYS_PWRGD
9
5
[20] 0.89V_PWRGD
8 ICH_PWROK
10
D11
A
PLTRST#
C65
*150P_50V_NPO_04
SUSCLK
C202
*10p_50V_NPO_04
ICH_PWROK [12]
7
C
[18] POK
U7C
74LVC08PW
7
7
4.7K_04
BRDID1
BKLTSEL1#
3
R199
12K_1%_04
13
1K_04
R157
U7A
74LVC08PW
14
11
*1K_04
R155
*0.1u_16V_Y5V_04
7
14
12
SUSC#
R66
Sheet 10 of 26
Tigerpoint Part D
SPKR STUFF R For Safe M ode.
ICH_SPKR [14]
2
[15,19]
RN18
10K_8P4R_04
H_DPRSTP# [2,21]
H_DPSLP# [2]
14
[3,8]
RN3
10K_8P4R_04
R43
BOARD ID
3/9
U7D
74LVC08PW
RN20
10K_8P4R_04
GPIO0
3.3V
3.3V
RN23
10K_8P4R_04
KBC_PWRBTN# [15]
ICH_RI
NM10-EXPRESS
C66
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
3.3VS
KBC_CLKRUN# [15]
SB_BLON [12]
SB_MUTE# [14]
BRDID1
BRDID2
AB17
V16
AC18
E21
H23
G22
D22
G18
G23
C25
T8
U10
AC3
AD3
J16
8
7
6
5
8
7
6
5
8
7
6
5
8
7
6
5
KBC_SMI#
KBC_SWI#
KBC_SCI#
LCD_PID0
*CDBU00340
4/15
[15] ALL_SYS_PWRGD
IMVP6_PWRGD
VCC_RTC
330K_04
ICH_INTVRMEN
R59
1M_04
SM_INTRUDER#
R57
20K_1%_04
3.3VS
C83
1u_6.3V_X5R_06
1u_6.3V_X5R_06
RN5
2.2K_4P2R_04
4
ICH_SMBDAT0
3
ICH_SMBCLK0
[12,13,15,16,17,18]
[2,8,11,12,13,17,18,19]
[2,3,5,6,7,8,9,11,12,13,14,15,17,20,21]
[2,5,7,9,11,20]
3.3VS
[11]
VDD3
3.3V
3.3VS
1.05VS
VCC_RTC
G
R56
*10mil_short
Z1007
1
2
SMBDAT0
Clear CM OS
Q2A
RT3K44M
ICH_RTCRST
ICH_SMBCLK0
4
3
ICH_SMBDAT0
D
8mil
6
S
[6,7]
PJ7
85204-02001
1
G
SMBCLK0
D
[6,7]
S
1
2
PN: 6-20-43150-102
1
2
3.3V
C89
1K_04
Z1006
RN4
2.2K_4P2R_04
4
SMBDAT0
3
SMBCLK0
ICH_RTCRST
R154
J_CBAT1
1
2
5
Z1005
R58
2
VDD3
D9
BAT54CWGH
1 A
C 3
2 A
Q2B
RT3K44M
Tigerpoint Part D B - 11
B.Schematic Diagrams
RTC Signal Group
RTCX1,RTCX2,RTCRST#
Zo = 50 Ohm ? 5%
signal : 4 m ils
Le ngth < 1000 m ils
Tigerpoint
LDRQ1#/GPIO23
LAD0/FWH0
LAD1/FWH1
LAD2/FWH2
LAD3/FWH3
LDRQ0#
LFRAME#
Schematic Diagrams
Tigerpoint Part E-F
B.Schematic Diagrams
GND
Sheet 11 of 26
Tigerpoint Part E-F
VSS01
VSS02
VSS03
VSS04
VSS05
VSS06
VSS07
VSS08
VSS09
VSS10
VSS11
VSS12
VSS13
VSS14
VSS15
VSS16
VSS17
VSS18
VSS19
VSS20
VSS21
VSS22
VSS23
VSS24
VSS25
VSS26
VSS27
VSS28
VSS29
VSS30
VSS31
VSS32
VSS33
VSS34
VSS35
VSS36
VSS37
VSS38
VSS39
VSS40
VSS41
VSS42
VSS43
VSS44
VSS45
VSS46
VSS47
VSS48
VSS49
VSS50
VSS51
VSS52
VSS53
VSS54
VSS55
VSS56
VSS57
VSS58
VSS59
6 OF 6
NM10-EXPRESS
RSVD32
A
3.3V
R67
D12
R62
D10
100_1%_04
CDBU00340
10_1%_04
CDBU00340
6mA
10mA
3/10
C
A1
A25
B6
B10
B16
B20
B24
E18
F16
G4
G8
H1
H4
H5
K4
K8
K11
K19
K20
L4
M7
M11
N3
N12
N13
N14
N23
P11
P13
P19
R14
R22
T2
T22
V1
V7
V8
V19
V22
V25
W12
W22
Y2
Y24
AB4
AB6
AB7
AB8
AC8
AD2
AD10
AD20
AD24
AE1
AE10
AE25
5V
C
U14F
Tigerpoint
3.3VS
A
5VS
3/10
C120
C119
C99
C90
1u_6.3V_X5R_04
*0.1u_10V_X7R_04
*1u_6.3V_X5R_04
0.1u_10V_X7R_04
50mA
1.5VS
L11
*HCB1005KF-121T20_short
C73
C74
10u_6.3V_X5R_06
0.1u_16V_Y5V_04
VCC_RTC
U14E
VCC5REF
Tigerpoint
VCC5REF_SUS
VCCSATAPLL
VCCRTC
VCCDMIPLL
VCCUSBPLL
F5
V5REF_SUS
C198
Y6
VCCSATAPLL
0.01u_50V_X7R_04 0.1u_16V_Y5V_04
POWER
VCC3_3_1
VCC3_3_2
VCC3_3_3
VCC3_3_4
VCC3_3_5
VCC3_3_6
G24
AE13
F2
VCCSUS3_3_1
VCCSUS3_3_2
VCCSUS3_3_3
VCCSUS3_3_4
AE16
5 OF 6
C75
0.01u_50V_X7R_04 *4.7u_6.3V_X5R_06
50mA
1.5VS
L14
HCB1005KF-121T20
VCC1_5
W18
AA8
M9
M20
N22
C81
C77
C82
C95
C80
0.1u_16V_Y5V_04
0.1u_16V_Y 5V_04
1u_6.3V_X5R_04
1u_6.3V_X5R_04
10u_6.3V_X5R_06
1.05VS
L12
HCB1005KF-121T20
0.98A
VCC1_05_1
VCC1_05_2
VCC1_05_3
VCC1_05_4
C78
10mA
F6
1.3A
VCC1_5_1
VCC1_5_2
VCC1_5_3
VCC1_5_4
C199
AE3
Y25 VCCDMIPLL
14mA
V_CPU_IO
1.5VS
L13
*HCB1005KF-121T20_short
2mA
F12 VCC5REF
J10
K17
P15
V10
H25
AD13
F10
G10
R10
T9
F18
N4
K7
F1
VCC1_05
C96
C85
C76
1u_6.3V_X5R_06
1u_6.3V_X5R_06
10u_6.3V_X5R_06
3.3VS
L18
*HCB1608KF-121T25_short
VCC3_3
0.29A
C79
C92
C98
C93
C106
C107
0.1u_16V_Y5V_04
0.1u_16V_Y 5V_04
1u_10V_06
1u_10V_06
1u_10V_06
*1u_10V_06
VCCSUS3_3
L16
3.3V
*HCB1608KF-121T25_short
0.13A
C86
C97
C91
C94
0.1u_16V_Y5V_04
1u_6.3V_X5R_06
1u_6.3V_X5R_06
*10u_6.3V_X5R_06
NM10-EXPRESS
[12,17,18,19,20,21]
[12,13,14,15,17]
[2,8,10,12,13,17,18,19]
[2,3,5,6,7,8,9,10,12,13,14,15,17,20,21]
[5,8,17]
[2,5,7,9,10,20]
[10]
B - 12 Tigerpoint Part E-F
5V
5VS
3.3V
3.3VS
1.5VS
1.05VS
VCC_RTC
Schematic Diagrams
USB, Panel, HDD, LED
USB PORT_2
R38
[8]
LVDD_EN [2]
J_LCD1
[2]
[2]
LVDS-L1N
LVDS-L1P
INV_BLON
5VS
C 195
0.1u_16V_Y5V_04
1A
4
3
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
[8]
2/25
ADD J_LCD1 6th PIN
CONNECT TO 3.3VS
LVDD_EN
USB_PN2
1
2
L10
*W CM2012F 2S-161T03
USB_PP2
R210
USB_PP2_R
3
J _USB1
V+
DATA_L
DATA_H
4
GND
5V
C264
*100u_6.3V_B_A
LVDS-L2N [ 2]
LVDS-L2P [2]
3.3V
L31
VI N
HCB1005KF -121T20
88242-3001
2
0_04
LVDS-L0N [ 2]
LVDS-L0P [2]
1A
USB_PN2_R
4/ 15
L_DDC_CLK [ 2]
L_DDC_DATA [2]
VLED
Port 2
1
4/15
C210
*1U_6. 3V_04
4/15
USBVCC
R205
*10k_04
R61
10K_04 R186
*0_04
5
2
[8] USB_OC#0_1_2
3
[18]
4
DD_ON#
U9
6
FLG# VOUT1
Sheet 12 of 26
USB, Panel, HDD,
LED
8
VIN 2 VOUT3
EN#
100mils
7
VIN 1 VOUT2
1
GND
RT9715BGS
BACKLIGHT ON CONTROL
LED
VDD3
VDD3
VDD3
VDD3
3.3V
MCH_BLON
Z1305
3. 3V
9
7
C59
U5D
74LVC08PW
220_04
LED01
0. 01u_50V_X7R_04
0. 01u_50V_X7R_04
Z1303 C21
Z1304 C19
0. 01u_50V_X7R_04
0. 01u_50V_X7R_04
WLAN/BT LED
D7
1
3
KPB-3025Y SGC
2
4
SATA_LED# [9]
R180
4
220_04
LED02
4/12
SATATXP0 [9]
SATATXN0 [ 9]
LED02
SATARXN0 [9]
SATARXP0 [9]
Q3
DTA114EUA
B
LED05
3
SG
1
323AH22FRT0102CC
3
1
R175
220_04
Y
Z1301 C40
Z1302 C35
3.3VS
R181
LED04
[13]
LED06
D8
B
C
E
HDD LED
KP-2012SGC
W LAN_EN [13, 15]
Q5
DTC114EU A
B
E
5VS
C6
10u_6. 3V_X5R_06
P IN G ND1~ 2 =G ND
4
LED _BAT_CHG# [ 15]
3.3VS
2
Close to the HDD
Connector.
C4
1u_10V_06
PN: 6-20-43730-022
194502-1
3
2
LED _BAT_F ULL# [15]
*100p_50V_NPO_04
11
C5
0.1u_16V_Y5V_04
PN: 6-20-43720-022
323AH22FRT0102C3
1
KPB-3025Y SGC
LED_ACIN# [ 15]
3.3VS
3.3VS
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
Y
2
4
C
S1
S2
S3
S4
S5
S6
S7
2
INV_BLON
13
7
J_HDD1
KPB-3025Y SGC
BAT LED
D6
LED_PW R# [ 15]
LED03
SATA HDD
3
Z1306 10
12
[15, 17] LI D_SW#
[10] ICH_PWROK
1
U5C
74LVC08PW
8
100K_04
14
R 31
D5
LED09
SG
3
1
*0.1u_16V_Y 5V_04
220_04
LED10
POWER LED
E
[ 2]
Y
*100K_04
C61
SG
R32
LED07
4
LED08
R176
220_04
4
*100K_04
220_04
6
5
R33
220_04
C
4
R182
A
Z1307
2
3. 3V
R95
C
3
U5B
74LVC08PW
R97
2
BKL_EN
U5A
74LVC08PW
14
[15]
1
7
SB_BLON
7
[10]
14
14
3. 3V
BT_EN
[13,15]
Q4
DTC114EUA
[16, 17,18,19,20,21]
[11, 17,18,19,20,21]
[ 11,13,14,15,17]
[10, 13,15,16,17,18]
[ 2,8,10, 11,13,17,18,19]
[2, 3,5,6,7,8,9, 10,11,13, 14,15,17,20,21]
VIN
5V
5VS
VDD3
3.3V
3.3VS
USB, Panel, HDD, LED B - 13
B.Schematic Diagrams
[15] LCD_BRIGHTNESS
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
C 186
0.01u_50V_X7R_04
[2] LVDS-LCLKN
[2] LVDS-LCLKP
0_04
+
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
R211
100K_04
PN: 6-21-B49A0-104
US04036BCA074
3
EN
G5243A
PN: 6-21-B4950-104
C107B3-10403-Y
GND
60mils
+
U S04036BCA074
2
2A
5
4
VOUT VIN
VIN
C 41
1u_10V_06
C60
4.7u_6.3V_Y5V_06
1
USBVCC
RN2
2. 2K_4P2R_04
1
4
L_DDC_CLK
2
3
L_DDC_DATA
s hield
s hield
s hield
s hield
U6
2A
3.3VS
GN D 1
GN D 2
GN D 3
GN D 4
3.3VS
C64
0. 1u_16V_Y5V_04
PLVDD
C 63
100u_6.3V_B_A
PANEL
Schematic Diagrams
BTB, 3G, WLAN, BT
[7] WLAN_CLKREQ#
[7] CLK_PCIE_WLAN#
[7] CLK_PCIE_WLAN
3.3V
10K_04 WLAN_CLKREQ#
*10K_04 WLAN_EN
35
23
25
31
33
3.3V
R192
4
*0_04
BT_EN R189
*10mil_short
17
19
37
39
41
43
45
47
49
51
3.3V
GND2
GND3
GND4
W_DISABLE#
PERSET#
SMB_CLK
SMB_DATA
USB_DUSB_D+
Reserv ed0
Reserv ed1
GND12
3.3VAUX_3
3.3VAUX_4
GND13
Reserv ed2
Reserv ed3
Reserv ed4
Reserv ed5
3.3VAUX_1
1.5V_1
1.5V_2
3.3VAUX_2
LED_WWAN#
LED_WLAN#
LED_WPAN#
18
26
34
40
50
21
27
29
[15]
20
22
30
32
36
38
BT_DET# [15]
USB_PN3 [8]
USB_PP3 [8]
24
28
48
52
42
44
46
40mils
3.3V_3G
3.3V
WLAN_LED R206
*10mil_short
LED02
80CLK
[12]
[15]
C125
*0.1u_16V_Y5V_04
UIM_PWR
UIM_DATA
UIM_CLK
UIM_RST
UIM_VPP
4
W_DISABLE#
PERSET#
SMB_CLK
SMB_DATA
USB_DUSB_D+
Reserv ed0
Reserv ed1
GND12
3.3VAUX_3
3.3VAUX_4
GND13
Reserv ed2
Reserv ed3
Reserv ed4
Reserv ed5
3.3VAUX_1
1.5V_1
1.5V_2
3.3VAUX_2
LED_WWAN#
LED_WLAN#
LED_WPAN#
18
26
34
40
50
20
22
30
32
36
38
3G_EN
3.3V_3G
40mils
PN: 6-20-84D00-226
1-081-400352-001
3G POWER
CRT_RED
CRT_GREEN
CRT_BLUE
[3]
[3]
[3]
[3]
[17]
DAC_HSYNC
DAC_VSYNC
DAC_DDCADATA
DAC_DDCACLK
BTN#
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
USB_PN7
USB_PP7
USB_PN0
USB_PP0
USB_PN1
USB_PP1
*0_06
B - 14 BTB, 3G, WLAN, BT
6
2 G
1
LAYOUT NOTE:
CRT_BLUE
R183
DAC_RED [3]
5 G
Q7A
S RT3K44M
FCM1005MF-600T03
L28
22p_50V_NPO_04
C262
22p_50V_NPO_04
C263
22p_50V_NPO_04
22p_50V_NPO_04
C184
22p_50V_NPO_04
C181
22p_50V_NPO_04
R184
UIM_CLK
UIM_RST
UIM_PWR
0_04
9
7
UIM_C_R 5
3
1
(TOP VIEW)
DETECT_SW
UIM_DATA
UIM_CLK
UIM_RST
UIM_PWR
91712-0090P
4/15
R202
*SCS751V-40
C
R213
*10mil_short
*0_04
PME#_R
PME# [8,15]
[11,12,14,15,17]
[10,12,15,16,17,18]
[2,8,10,11,12,17,18,19]
[2,3,5,6,7,8,9,10,11,12,14,15,17,20,21]
UIM_MCMD
UIM_I/O
UIM_VPP
UIM_GND
PN: 6-86-2B010-001
91712-0090P
3/1
C180,C181,C184,C261,C262,C263
CHANGE FROM 10p_50V_NPO_04 TO 22p_50V_NPO_04
D18
A
UIM_DATA
J_SIM1
DAC_BLUE [3]
C261
C180
4.7K_04
UIM_PWR
DAC_GREEN [3]
POT34R6B030010R
[10] PCIE_WAKE#
3G02
D
SIM CONN
FCM1005MF-600T03
L27
CRT_RED
PCIE_TXP5_CARD [8]
PCIE_TXN5_CARD [8]
PN: 6-21-C3700-217
POT34R6B030010R
3G03
100K_04
C24
*0.01u_50V_X7R_04
[15] 3G_PWR_EN
P/N: 6-21-C3A10-106
A1001WR-S-06PD01
EM I
[8]
[8]
[8]
[8]
[8]
[8]
CLK_PCIE_JMC261 [7]
CLK_PCIE_JMC261# [7]
10_06
PN: 6-21-C3A00-106
87213-0600G
VDD3
PCIE_RXP5_CARD [8]
PCIE_RXN5_CARD [8]
R195
20K_1%_04
R191
33G_PWR_EN
5VS
VDD3
3.3V
3.3VS
8
6
4
2
R185
0_04
UIM_D_R
UIM_DATA
UIM_VPP
C245
*22p_50V_NPO_04
PME#_R
[15] CCD_EN
[10,15] BUF_PLT_RST#
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
R190
C246
*22p_50V_NPO_04
R201
J_BTB1
3/16
3.3V
3.3VS
EN
*87213-0600G
FCM1005MF-600T03
CRT_GREEN L29
R200
*15mil_short
GND
*APL3512A
GNG
GND
GND
GND
5VS
2
1
GND1
GND2
GND3
GND4
4/12
R200 & R201
from 04 size change to 06
3G01
6
C243
*22p_50V_NPO_04
CONN. FOR CONT TO CR/B
VOUT VIN
VIN
5
4
C247
0.1u_16V_Y5V_04
3.3V
C266
*0.1u_16V_Y5V_04
S
[8] USB_PP5
[8] USB_PN5
C265
*10u_6.3V_X5R_06
D
BT_DET#
4/12
Q8
*MTN7002ZHS3
J_BT1
6
5
4
3
2
1
C258
1u_6.3V_X5R_04
3
1
J_BT1
3.3V
U16
3.3V_3G
3A
4
3.3V_3G
*10K_04
C257
1u_10V_06
Bluetooth CONN.
R196
Q6
AO3415
S
D
3A
3/10
C259
*4.7u_6.3V_Y5V
3.3V
USBVCC
3.3V_3G
+
PN: 6-21-84D90-226
88910-5204M -01
Pin#52
G
[15]
USB_PN4 [8]
USB_PP4 [8]
24
28
48
52
42
44
46
1-081-400352-001
PN: 6-21-84D90-226
88910-5204M-01
3.3V
BT_EN
3.3V_3G
+
C244
*22p_50V_NPO_04
C238
*0.1u_16V_Y5V_04
C239
*0.1u_16V_Y5V_04
4/12
ADD R206
GND6
GND7
GND8
GND9
GND10
GND11
PETn0
PETp0
PERn0
PERp0
17
19
37
39
41
43
45
47
49
51
4/15
3.3V
PN: 6-20-84D00-226
1-081-400352-001
Pin#39,41
GND5
GND2
GND3
GND4
35
23
25
31
33
3G_DET#
WLAN_EN [12,15]
BUF_PLT_RST# [10,15]
1-081-400352-001
Pin#24
CLKREQ#
REFCLKREFCLK+
GND0
GND1
40mils
2
6
8
10
12
14
16
KEY
GND6
GND7
GND8
GND9
GND10
GND11
PETn0
PETp0
PERn0
PERp0
3.3VAUX_0
1.5V_0
UIM_PWR
UIM_DATA
UIM_CLK
UIM_RESET
UIM_VPP
G
VDD3
Pin#2
WAKE#
COEX1
COEX2
7
11
13
9
15
C252
0.1u_16V_Y5V_04
21
27
29
[15] 80PORT_DET#
[15]
3IN1
Sheet 13 of 26
BTB, 3G, WLAN, BT
GND5
J_3G1
KEY
[15] WLAN_DET#
[8] PCIE_RXN1_WLAN
[8] PCIE_RXP1_WLAN
[8] PCIE_TXN1_WLAN
[8] PCIE_TXP1_WLAN
C237
0.1u_16V_Y5V_04
B.Schematic Diagrams
R92
R84
CLKREQ#
REFCLKREFCLK+
GND0
GND1
1
3
5
3.3V
C250
220U_4V_D
WLAN_CLKREQ# 7
11
13
9
15
3G CARD
2
6
8
10
12
14
16
C256
220U_4V_D
*0_04
3.3VAUX_0
1.5V_0
UIM_PWR
UIM_DATA
UIM_CLK
UIM_RESET
UIM_VPP
C254
0.1u_16V_Y5V_04
R188
BT_EN
WAKE#
COEX1
COEX2
C251
10u_6.3V_X5R_06
[12,15]
J_MINI1
C253
0.1u_16V_Y5V_04
1
3
5
[10] PCIE_WAKE#
C249
0.1u_16V_Y5V_04
MINI-PCIE CARD AND Debug Port
D
Q7B
S RT3K44M
Schematic Diagrams
Audio Codec VT1812
33_04
33_04
47
EAPD_MODE#
ICH_SPKR
MIC_SENSE R91
C163
AUDG
C147
HP_SENSE R81
A1517
10K_04
100p_50V_NPO_04
4.7K_04
46
44
1u_10V_06
C156
20K_1%_04
*100p_50V_NPO_04
*100p_50V_NPO_04
5.1K_1%_04
43
A1518 12
A1519 13
A1520 34
14
15
Close to Co dec
R171 1K_04
INT_MIC_R
INT_MIC
4.7K_04
4.7u_6.3V_X5R_06
A1521
C228
A1522
C227
4.7u_6.3V_X5R_06
MIC2-VREFO
4.7K_04
R169 75_1%_04
MIC1-L
MIC1-R
R170 75_1%_04
C222
330p_50V_X7R _04
C 223
330p_50V_X7R _04
MIC1-L_R
MIC1-R_R
16
17
18
19
20
4.7u_6.3V_X5R_06
A1523 21
C226
A1524 22
C225
4.7u_6.3V_X5R_06
C135
10u_6.3V_X5R _06
28
MIC1-VREFO
C157
0.1u_16V_Y5V_04
0.1u_10V_X5R_04
10u_6.3V_X5R_06
C 87
100p_50V_NPO_04
A1509
AUDG
SPDIFO1
SPDIFO2
31
30
29
A1510
CAPCAP+
35
36
FRONT_L
FRONT_R
C150
C152
2.2u_16V_X5R_06
2.2u_16V_X5R_06
AUDG
NC
PCBEEP-IN
LOUT1-L
LOUT1-R
Sense A(JD1)
Sense B(JD2)
LOUT2-L
LOUT2-R
LINE2-L
LINE2-R
ANALOG
39
41
33
32
HPOUT-L
HPOUT-R
MIC2-L
MIC2-R
HP_SENSE
R78
HEADPHONE-R
220_04
R69
HEADPHONE-L
220_04
40
JDREF
MIC1-L
MIC1-R
A1511
R75
5.1K_1%_04
R68
*1K_04
A1505 10
A1506 2
1
L
TSH-5126DS2R2-PA6T-G
R83
1u_6.3V_X5R_04
1u_6.3V_X5R_04
A1525
A1526
0_04
1u_6.3V_X5R_04
1u_6.3V_X5R_04
A1527 17
A1528 7
5VS
19
MUTEAPM#
R177
R178
R173
R174
AUDG
3.3VS
A1529
A1530
*100K_04
*100K_04
100K_04
100K_04
2
3
1
11
13
20
21
2/8
R178 DELETE PARTS
R174 ADD PARTS
U15
LINLIN+
RINRIN+
SD#
GAIN0
GAIN1
PVDD
PVDD
VDD
*1K_04
BLACK
5VS
L41
HCB1005KF-121T20
LOUT+
LOUTROUT+
ROUTGND
GND
GND
BYPASS
GND
EXPOSED PAD
NC
SPKOUTL+
8
SPKOUTL-
18
SPKOUTR+
14
SPKOUTR-
10
12
AUDG
Gain Settings
AV(inv) INPUT IMPED ANC E
GAIN0
GAIN1
0
0
6 dB
90K
0
1
10 dB
70K
1
0
15.6 d B
45K
1
1
21.6 d B
25K
10K_04
C
D2 CDBU00340
A
C
D3 CDBU00340
A
C232
C231
*180p_50V_NPO_04
*180p_50V_NPO_04
AUDG
4
N7010
D1 *CDBU00340
C
A
HEADPHONE
Sheet 14 of 26
Audio Codec
VT1812
AUDG
6
15
16
L40
L39
L38
L37
*FCM1608K-121T06_short
*FCM1608K-121T06_short
*FCM1608K-121T06_short
*FCM1608K-121T06_short
J_SPK1
SPKOUTL+_L
4
SPKOUTL-_L
SPKOUTR+_R 3
2
SPKOUTR-_R
1
85204-04001
A1531
C 236
4.7u_6.3V_X5R _06
0_04
FRONT_R R166
Thermal Pad
A1532 C233
C235
AUDG
A1533 C203
C234
AUDG
5
9
FRONT_L R179
PN: 6-20-43150-102
R76
PN:
AUDG
AUDG
[15] KBC_MUTE#
FCM1005KF-121T03
5 J_HP1
4
3
R
AUDG
2/25
CHANGE SIZE FROM
0603 TO 0402
88266-02001
EAPD_MODE#
L19
A1508
A1504
VT1812
J_INTMIC1
SB_MUTE#
FCM1005KF-121T03
HEADPHONE-L
HEADPHONE-R
MIC2-VREFO
[10]
L22
A1507
23
24
LINE1-L
LINE1-R
LINE1-VREFO
MIC2-VREFO
LINE2-VREFO
R172
2.2K_04
330p_50V_X7R_04
BLACK
DMIC-CLK1/2
DMIC-CLK3/4
AUDG
C224
MIC IN
AUDG
CPVEE
CBN
CBP
5VS_AMP
1
2
PN:
EAPD
AUDG
INT_MIC_R
A1502 10
A1503 2
1
L
TSH-5126DS2R2-PA6T-G
37
MONO-OUT
DIGITAL
C153
C154
27
C100
100p_50V_N PO_04
25
38
AVDD 1
AVDD 2
MIC1-VREFO
26
42
D13
BAT54AWGH
A 1 MIC1-VREFO-L R167
MIC1-VREFO 3 C
A 2 MIC1-VREFO-R R168
VREF
5 J_MIC1
4
3
R
C207
*0.1u_16V_Y5V_04
[10]
R88
C162
R90
A1501
C 206
0.1u_16V_Y5V_04
KBC_BEEP
FCM1005KF-121T03
C205
*10u_6.3V_X5R_06
[15]
L15
MIC1-L_R
C204
10u_6.3V_X5R_06
D4
BAT54CWGH
1 A
C 3 BEEP
2 A
PC BEEP
48
45
FCM1005KF-121T03
C149
100p_50V_NPO_04
R86
R87
U11
GPIO0/DMIC-DATA1/2
GPIO1/DMIC-DATA3/4
SDATA-OUT
BIT-CLK
SDATA-IN
SY NC
RESET#
L17
MIC1-R_R
AUDG
C124
100p_50V_N PO_04
R85
MIC_SENSE
PN: 6-20-43130-104
C230
C229
*180p_50V_NPO_04
*180p_50V_NPO_04
AUDG
AUDG
(D efau lt)
MUTEAPM#
[11,12,13,15,17] 5VS
[2,3,5,6,7,8,9,10,11,12,13,15,17,20,21] 3.3VS
Audio Codec VT1812 B - 15
B.Schematic Diagrams
AZ_SDOUT
AZ_BITCLK
AZ_SDIN0
AZ_SY NC
AZ_RST#
2
3
A1512 5
A1513 6
33_04 A1514 8
A1515 10
A1516 11
33_04
33_04
5VS
L23
HCB1005KF-121T20
AVSS1
AVSS2
22p_50V_NPO_04
C148
[10]
[10]
[10]
[10]
[10]
1
9
DVSS1
DVSS2
1/12
R79,R82,R86,R87,C148
M OV E TO TIGERPOINT SIDE
DVDD
DVDD -IO
4
7
AUDG
R79
R82
C159
10u_6.3V_X5R_06
C 140
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
C 134
10u_6.3V_X5R _06
*10mil_short
*10mil_short
C260
C155
C209
C137
0.1u_16V_Y5V_04
JP1
JP3
5VS_AUD
3.3VS_AUD
C 138
0.1u_16V_Y5V_04
3.3VS
L20
*HCB1608KF-121T25_short
Schematic Diagrams
KBC-ITE IT8502E-J, TP, LID
M ODEL_ID
L24
HCB1005KF-121T20
VCC_ST&BY
KBC_AVDD
V1.0
L21
HCB1005KF-121T20
VDD3
RA
RB
10K
X
TP CONN.
M1100M
5VS
*0.1u_16V_Y5V_04
C211
VDD3
C165
C123
C164
C105
C143
C139
10u_6.3V_X5R_06
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
0.1u_16V_Y5V_04
*0.1u_16V_Y5V_04
J_TP1
J_TP1
R70
RA
VDD3
10K_04
C146
R72
4
1
2
3
4
TP_DATA
TP_CLK
4/16
MODEL_ID
*10K_04
KBC_AGND
1
85201-04051
0.1u_16V_Y5V_04
PN: 6-20-94A50-104
RB
[14] KBC_MUTE#
[13]
[16]
[16]
BAT_DET
BAT_VOLT
3G_DET#
CCD_DET#
MODEL_ID
3G_DET#
110
111
115
116
SMC_CPU_THERM 117
SMD_CPU_THERM 118
SMC_BAT
SMD_BAT
[2] SMC_CPU_THERM
[2] SMD_CPU_THERM
BRIGHTNESS
[14] KBC_BEEP
LOW ACTIVE
66
67
68
69
70
71
72
73
[12] LED_BAT_CHG#
[12] LED_BAT_FULL#
[12] LED_PWR#
80CLK
3IN1
80PORT_DET#
[13]
80CLK
[13]
3IN1
[13] 80PORT_DET#
TP_CLK
TP_DATA
24
25
28
29
30
31
32
34
85
86
87
88
89
90
4/15
ALL_SYS_PWRGD
[17] PWR_SW#
[10] KBC_PWRBTN#
LID_SW#
125
18
21
33
108
109
ECSCI#/GPD3( PU )
ECSMI#/GPD4( PU )
DAC
DAC0/GPJ0
DAC1/GPJ1
DAC2/GPJ2
DAC3/GPJ3
DAC4/GPJ4
DAC5/GPJ5
IT8502E
FLASH
ADC0/GPI0
ADC1/GPI1
ADC2/GPI2
ADC3/GPI3
ADC4/GPI4
ADC5/GPI5
ADC6/GPI6
ADC7/GPI7
FLFRAME#/GPG2
FLAD0/SCE#
FLAD1/SI
FLAD2/SO
FLAD3/GPG6
FLCLK/SCK
( PD )FLRST#/WUI7/GPG0/TM
GPIO
SMBUS
( PD )KSO16/GPC3
( PD )KSO17/GPC5
SMCLK0/GPB3
SMDAT0/GPB4
SMCLK1/GPC1
SMDAT1/GPC2
SMCLK2/GPF6( PU )
SMDAT2/GPF7( PU )
( PD
( PD
( PD
( PD
( PD
( PD
( PD
( PD
PWM
)
)
)
)
)
)
)
)
( PD )EGAD/GPE1
( PD )EGCS#/GPE2
( PD )EGCLK/GPE3
( PD )WUI5/GPE5
( PD )LPCPD#/WUI6/GPE6
)
)
)
)
)
)
PWM/COUNTER
( PD )TACH0/GPD6
( PD )TACH1/GPD7
( PD )TMRI0/WUI2/GPC4
( PD )TMRI1/WUI3/GPC6
WAKE UP
PWRSW/GPE4( PU )
8
7
6
5
1
2
3 RN12
4 10K_8P4R_04
BT_DET#
3G_DET#
BAT_DET
R77
VDD3_LID
R20
100K_04
KBC_WRESET#
C142
R80
KBC_PCLK
*10_04
0.1u_16V_Y5V_04
C144
*10p_50V_NPO_04
C121
0.1u_16V_Y5V_04
C151
*0.1u_16V_Y5V_04
100K_04
U4
1
KBC_PCLK_R
VCC
OUT
3
LID_SW#
LID_SW# [12,17]
GND
4 RN13
3 2.2K_4P2R_04
MH248-ALFA-ESO
2
3
1
FAN CONTROL
BAT_VOLT
( PD )CRX/GPC0
( PD )CTX/GPB2
GP INTERRUPT
LPC/WAKE UP
GINT/GPD5( PU )
100
101
102
103
104
105
106
( PD )L80HLAT/GPE0
( PD )RING#/PWRFAIL#/LPCRST#/GPB7
NC1
5VS_FAN
AC_IN#
R93
SUSB# [10,17]
SUSC# [10,19]
R73
100_04
BRIGHTNESS
C133
0.1u_16V_Y5V_04
[12] LCD_BRIGHTNESS
CLOCK
CK32KE
CK32K
FON
VIN
VOUT
VSET
8
7
6
5
GND
GND
GND
GND
4.7u_6.3V_Y5V_06
5VS_FAN
KBC_CLKRUN# [10]
BT_EN [12,13]
BKL_EN [12]
3G_PWR_EN [13]
WLAN_DET# [13]
BT_DET# [13]
DD_ON [17,18]
3G_EN [13]
J_FAN1
1
2
3
C2
10u_6.3V_X5R_06
J_FAN1
3
1
85205-03701
PN: 6-20-51130-103
85205-03701
CPU_FANSEN
35
17
R1
4.7K_04
PN: 6-20-51140-103
3801-E03N-01R
KBC_RSMRST# [10]
KBC_RST# [9]
SPI EEROM
CPU_FANSEN
120
124
VCORE_ON [21]
ALL_SYS_PWRGD [10]
119
123
MCH_BLCTL [2]
PME#
[8,13]
19
KBC_SWI# [10]
112
2
128
U1
AX995SA
C1
CCD_EN [13]
BT_DET#
1
2
3
4
CPU_FAN
VCHG-SEL [16]
82
83
84
47
48
5VS
100K_04
FLFRAM#
KBC_SPI_SCLK
56
57
93
94
95
96
97
98
99
107
PN: 6-20-94A80-124
FLFRAM#
KBC_SPI_CE#
KBC_SPI_SI
KBC_SPI_SO
8Mbit
KBC_SPI_*_R = 0.1"~0.5"
VDD3
CHG_EN [16]
8
R96
R94
1K_04
KBC_SPI_WP#
R89
C160
15p_50V_NPO_04
SI
WP#
CE#
SCK
HOLD#
VSS
SST25VF080B
*10M_06
X3
1
2
MC-306_32.768KHz
4
3
X5
1
2
*MC-146_32.768KHz
4
3
C158
NC_04
KBC_AGND
VDD
SO
3
4.7K_04
KBC_SPI_HOLD# 7
KBC_CK32KE
KBC_CK32K
C145
0.1u_16V_Y5V_04
Z1601
B - 16 KBC-ITE IT8502E-J, TP, LID
SMD_CPU_THERM 1
SMC_CPU_THERM 2
U12
CIR
RI1#/WUI0/GPD0( PU )
RI2#/WUI1/GPD1( PU )
IT8502E-J
4 RN16
3 2.2K_4P2R_04
3.3VS
WAKE UP
PS/2
UART
)GPH0/ID0
)GPH1/ID1
)GPH2/ID2
)GPH3/ID3
)GPH4/ID4
)GPH5/ID5
)GPH6/ID6
)GPG1/ID7
EXT GPIO
PS2CLK0/GPF0( PU
PS2DAT0/GPF1( PU
PS2CLK1/GPF2( PU
PS2DAT1/GPF3( PU
PS2CLK2/GPF4( PU
PS2DAT2/GPF5( PU
RXD/GPB0( PU )
TXD/GPB1( PU )
KB-SO0
KB-SO1
KB-SO2
KB-SO3
KB-SO4
KB-SO5
KB-SO6
KB-SO7
KB-SO8
KB-SO9
KB-SO10
KB-SO11
KB-SO12
KB-SO13
KB-SO14
KB-SO15
1
2
3
7
9
10
13
16
17
18
19
20
21
22
23
24
1
2
SMD_BAT
SMC_BAT
85201-24051
ADC
PWM0/GPA0( PU
PWM1/GPA1( PU
PWM2/GPA2( PU
PWM3/GPA3( PU
PWM4/GPA4( PU
PWM5/GPA5( PU
PWM6/GPA6( PU
PWM7/GPA7( PU
4
5
6
8
11
12
14
15
C18
0.1u_16V_Y5V_04
KSO0/PD0
KSO1/PD1
KSO2/PD2
KSO3/PD3
KSO4/PD4
KSO5/PD5
KSO6/PD6
KSO7/PD7
KSO8/ACK#
KSO9/BUSY
KSO10/PE
KSO11/ERR#
KSO12/SLCT
KSO13
KSO14
KSO15
GA20/GPB5
KBRST#/GPB6( PU )
PWUREQ#/GPC7( PU )
L80LLAT/GPE7( PU )
36
37
38
39
40
41
42
43
44
45
46
51
52
53
54
55
KB-SI0
KB-SI1
KB-SI2
KB-SI3
KB-SI4
KB-SI5
KB-SI6
KB-SI7
2
74
3
VBAT
AVCC
VSTBY
VSTBY
VSTBY
VSTBY
VSTBY
VSTBY
11
VCC
WRST#
LID SWITCH IC
VDD3
58
59
60
61
62
63
64
65
C161
0.1u_16V_Y5V_04
CPU_FAN
[12,13] WLAN_EN
76
77
78
79
80
81
K/B
AVSS
23
15
[10] KBC_SMI#
[10] KBC_SCI#
[16]
[16]
126
4
16
20
J_KB1
KSI0/STB#
KSI1/AFD#
KSI2/INIT#
KSI3/SLIN#
KSI4
KSI5
MATRIX
KSI6
KSI7
75
Sheet 15 of 26
KBC-ITE IT8502E-J,
TP, LID
AC_IN#
14
LAD0
LAD1
LAD2
LAD3
LPCCLK
LFRAME#
LPC
SERIRQ
LPCRST#/WUI4/GPD2( PU )
VSS
VSS
VSS
VSS
VSS
VSS
VSS
KBC_WRESET#
[9] KBC_GA20#
[16]
AC_IN#
[12] LED_ACIN#
[2,10] THERM_ALERT#
10
9
8
7
13
6
5
22
1
12
27
49
91
113
122
B.Schematic Diagrams
U10
LPC_AD0
LPC_AD1
LPC_AD2
LPC_AD3
[10] LPC_AD0
[10] LPC_AD1
[10] LPC_AD2
[10] LPC_AD3
[7] KBC_PCLK
[10] LPC_FRAME#
[9] LPC_SIRQ
[10,13] BUF_PLT_RST#
26
50
92
114
121
127
3.3VS
15p_50V_NPO_04
[18]
VDD3_LID
[10,12,13,16,17,18] VDD3
[11,12,13,14,17] 5VS
[2,3,5,6,7,8,9,10,11,12,13,14,17,20,21] 3.3VS
5
KBC_SPI_SI_R
RN14
15_4P2R_04
1
4 KBC_SPI_SI
2
3 KBC_SPI_SO
2 KBC_SPI_SO_R
1 KBC_SPI_CE#_R
6
4
KBC_SPI_SCLK_R
RN15
15_4P2R_04
1
4 KBC_SPI_CE#
2
3 KBC_SPI_SCLK
Schematic Diagrams
PWR AC_IN, Charge
*10mil_short CHG08
PC147
0.1u_50V_Y5V_06
PC146
0. 1u_50V_Y5V_06
PC6
0. 1u_50V_Y5V_06
PN: 6-21-D3460-105
BTD-05TI1G
PN: 6-21-D3490-105
BA05Q16BCCA40
PL4
4.7UH_6.8*7.3*3.5
1
2
7
AC
Charge Voltage 12.6V
Total Pow er 30W
PR26
0.02_1%_32
CHG05
VA
4/15
*10K_04
PR7
51K_1%_04
SGND5
PC13
PR6
100p_50V_NPO_04
1K_1%_04
CHG34
PC4
*C_50V_04
SGND5
CTL1
PR2
10K_1%_04
PR18
39.2K_1%_04
SGND5
SGND5
PR25
PR13
113K_1%_04
102K_1%_04
[15]
CHG_EN
2 G
PR30
100K_04
47K_04
3
CTL1
D
PQ4A
S RT3K44M
5 G
VOLT-SEL
PR24
PR3
PR5
1K_1%_04
76.8K_1%_04
2M_1%_04
CHG37
PR23
SGND5
D
PQ4B
S RT3K44M
PJ1
8mil
CHG21
PQ1
MTN7002ZHS3
G
22K_1%_04
SGND5
4/15
PR38
CHG07
SGND5
CHG36
PC5
VDD3
4
CHG18
CHG19
CHG20
VOLT-SEL
6
24
23
22
21
20
19
18
17
33
1000p_50V_X7R_04
PC10
PR1
1000p_50V_X7R_04
22K_1%_04
CHG35
VDD3
PC22
0.1u_50V_Y5V_06
2
MB39A132
TRERMAL PAD
VA
VIN
CTL1
GND
VREF
RT
CS
ADJ3
BATT
SGND
[15]
PQ8
DTC114EUA
1
VCC
-INC1
+INC1
ACIN
ACOK
-INE3
ADJ 1
COMP1
*0_04
D
10K_1%_04
PR34
S
10K_1%_04
*0_04
PIN 25th
FOR 2C CONNECT TO GND
FOR 3C CONNECT N.C.
FOR 4C CONNECT TO VREF PIN
PC16
0.1u_16V_Y5V_04
PR4
PC11
0.1u_16V_Y5V_04
PR8
1
2
3
4
5
6
7
8
CTL2
CB
OUT-1
LX
VB
OUT-2
PGND
CELLS
100K_04
CHG31
CHG30
AC_OK#
CHG29
CHG28
CHG27
CHG26 9
10
11
CHG2512
13
CHG2414
CHG2315
CHG2216
PR17
PR35
CHG17
32
31
30
29
28
27
26
25
VA
PU1
CHG33
CHG12
CHG13
CHG14
CHG15
CHG16
2/23
PCB FOOTPRINT CHANGE
-INE1
OUTC1
OUTC 2
+I NC2
-I NC2
ADJ 2
COMP 2
COMP3
200K_04
CHG32
AC_IN#
C
SGND5
PR27
PC60
0.1u_16V_Y5V_04
*10mil_short
PC84
1u_25V_X7R_08
PC14
0. 1u_16V_Y5V_04
PD3
RB0540S2
A
AC_IN#
CHG06 B
PR36
C
PR80
UDZ16B
A
PC24
0.1u_25V_X7R_06
VDD3
PD1
CHG11
2/25
FOR VIN TO VA
LEAKAGE CURRENT
Sheet 16 of 26
PWR AC_IN,
Charge
PQ2
MTN7002ZHS3
C
1000p_50V_X7R_04
PC76
4.7u_25V_X5R_08
CHG09
PC19
PC80
4.7u_25V_X5R_08
4
*10mil_short
PQ12B
PD1503YVS
PC90
*4.7u_25V_X5R_08
10_06
3
PR32
PC91
4.7u_25V_X5R_08
CHG10
PC92
4.7u_25V_X5R_08
5
6
PR28
8
PC3
0. 1u_50V_Y5V_06
PC2
0.1u_50V_Y5V_06
PC75
4.7u_25V_X5R_08
10K_1%_04
PC68
4.7u_25V_X5R_08
4
PC154
0.33u_16V_Y5V_06
S
PR12
PR11
G
VDD3
BAT_VOLT [15]
PC25
1u_6. 3V_X5R_06
PQ12A
PD1503YVS
BAT_VOLT
PR42
6.04K_1%_04
2
1
PQ3
PR31
DTA114EUA
30K_1%_04
C CHG04
Charge Current 1.5A
1
PR14
0.02_1%_32
BAT
E
3
2
1
BAT E
PQ13
P2003EVG
5
6
7
8
B
4/15
PQ11
P2003EVG
SGND5
SGND5
PR22
BA05Q16BCCA40
VCHG-SEL [15]
VH=4.2V
VL=4.3V
*10mil_short
SGND5
[12,17,18,19,20,21] VIN
[17] VA
[10,12,13,15,17,18] VDD3
PWR AC_IN, Charge B - 17
B.Schematic Diagrams
1
2
3
D
4
PR33
SGND5
4
3
2
1
VA
VIN
130K_1%_04
5
SMC_BAT_R
SMD_BAT_R
BAT_DET_R
HCB1005KF-121T20
HCB1005KF-121T20
HCB1005KF-121T20
PN: 6-20-B3Z00-004
2DC-G726-I03
PN: 6-20-B3Z10-004
50931-00501-001
PD10
*BAV99
PC9
30p_50V_NPO_04
10K_04
PD9
*BAV99
PC8
30p_50V_NPO_04
[15] SMC_BAT
[15] SMD_BAT
[15] BAT_DET
PR82
AC
AC
PL9
PL10
PL11
PD8
*BAV99
PC7
30p_50V_NPO_04
PN: 6-20-B3Z20-004
JDD-52005S-165
PC69
0.1u_50V_Y5V_06
PC1
0. 1u_50V_Y5V_06
JDD-52005S-165
8
7
6
5
A
BAT
J_MBAT1
1
2
GND1
GND2
VA
C
VA
A
PL3
HCB4532KF-800T60
A
VA_IN
C
J_DC_JACK1
C
VDD3
EM I
Schematic Diagrams
PWR SW, 1.8VS, 3VS, 5VS, 1.5VS
2A
3
1M_04
3
EN_5VS
D
PQ19B
RT3K44M
PC119
EM I
Power Plane
PR102
PR95
*10_06
*100K_04
DL_5VS
5V
G 5 SUSBL
SUSBL G
S
S
4
1000p_50V_X7R_04
VA
5VS
PC141
0.1u_50V_Y5V_06
PR96
P2808A1
PQ20
P2703BAG
6
5
2
4
1
D
5A
PC120
10u_6.3V_X5R_06
5V
PC118
0.1u_16V_Y5V_04
SYS15V
PQ22
*MTN7002ZHS3
[13]
VIN
VIN1
1
VA
2
PQ27
MTN7002ZHS3
S
D
BTN#
PU8
VIN1
VIN
3
DD_ON_LATCH
M_BTN#
PWR_SW#
4
G
100K_04
PR113
7
*100K_04
6
5
INSTANT-ON
1
PR101
VDD3
8
4/12
GND
P2808A1
PJ16
PR130
Power Plane
PR110
10_06
PR116
PQ24
P2703BAG
6
5
2
4
1
2A
3
1M_04
EN_1.5VS
D
4/12
Q10
MTN7002ZHS3
PC136
PR111
PR129
*10_06
*100K_04
S
SUSBL G
DL_1.5VS
Q9
*MTN7002ZHS3
H5
MTH8_0D2_3B6_5
2
9
3
8
4
7
1
5
6
H7
MTH8_0D2_3B6_5
2
9
3
8
4
7
1
5
6
H3
H6_5D2_3
H8
H6_5D2_3
H4
H9
H3_0B5_0D2_0 H3_0B5_0D2_0
M1
M2
M3
M4
M5
M6
M7
M8
M-MARK1 M-MARK1 M-MARK1 M-MARK1 M-MARK1 M-MARK1 M-MARK1 M-MARK1
3.3V
1.8VS
1
PU9
VIN
2
VOUT
5
200mA
Powe r Plane
GND
3
SD#
10K_04
BYP
AX6607-18BA
[20] 1.05VS_PWRGD
4
PC152
0.01u_50V_X7R_04
500mA
PR83
PR127
PC151
*Rb
1u_10V_06
H1
C111D111N
PR128
*Ra
Vout=Vref(1+Ra /Rb)
[4,5,6,19]
[5,8,11]
[11,12,13,14,15]
[2,3,5,6,7,8,9,10,11,12,13,14,15,20,21]
[5]
B - 18 PWR SW, 1.8VS, 3VS, 5VS, 1.5VS
H2
H11
C111D111N C111D111N
1.5V
1.5VS
5VS
3.3VS
1.8VS
[12,16,18,19,20,21]
[18]
[16]
[18]
[11,12,18,19,20,21]
[10,12,13,15,16,18]
[2,8,10,11,12,13,18,19]
VIN
VIN1
VA
SYS15V
5V
VDD3
3.3V
H10
C111D111N
PC156
*0.1u_50V_Y5V_06
PC155
*0.1u_50V_Y5V_06
H12
H13
H14
H15
H17
H16
H6_5B5_0D3_7 H6_5B5_0D3_7 H6_5B5_0D3_7 H6_5B5_0D3_7 H6_5B5_0D3_7 H6_5B5_0D3_7
Power Plane
G SUSBL
4700p_50V_X7R_04
2/26
RESERVE PC155,PC156
1.5VS
D
3A
1/21
RENAM E C240 TO PC148,C241
TO PC149,C242 TO PC150
EM I
PC150
0.1u_50V_Y5V_06
VIN
PC134
0.1u_50V_Y5V_06
4
1
DL_3.3V
D
PQ23B
RT3K44M
S
PC149
0.1u_50V_Y5V_06
*100K_04
SUSBL 5 G
PC139
10u_6.3V_X5R_06
1.5V
PWR_SW#
PR100
SUSBL
PC157
0.1u_16V_Y5V_04
SYS15V
2
1
[15]
8mil
*100K_04
S
2200p_50V_X7R_04
PJ14
PC148
0.1u_50V_Y5V_06
G 2
*10mil_short
DD_ON
[15,18] DD_ON
PC77
0.1u_50V_Y5V_06
PC128
[12,15] LID_SW#
PC59
0.1u_50V_Y5V_06
PQ23A
RT3K44M
[19,20]
PC89
0.1u_50V_Y5V_06
6
D
S
2
1
EN_3.3VS
Sheet 17 of 26
PWR SW, 1.8VS,
3VS, 5VS, 1.5VS
PR132
3A
3
1M_04
SUSB#
3.3VS
SUSBL
8mil
D
2 G
PC78
0.1u_50V_Y5V_06
PR112
[10,15]
PQ21
P2703BAG
6
5
2
4
1
3
3A
PC121
10u_6.3V_X5R_06
3.3V
PC124
0.1u_16V_Y5V_04
SYS15V
S
B.Schematic Diagrams
PQ19A
RT3K44M
6
SUSBL
Schematic Diagrams
PWR VDD3, 3.3V, 5V, SYS 15V
VREF
PC127
1000p_50V_X7R_04
P0307
PQ9A
PD1503Y VS
8
20
P0308
4/15
19
P0309
PQ9B
PD1503Y VS
3
POWER CHANGE
*0_04
PR119
*10mil_short
18
16
17
Rb
PR81
VIN
*CDBU00340
A
PR123
PC137
0.01u_50V_X7R_04
P0316
VIN1
PC67
PC142
4.7u_25V_X5R_08
PC138
0.01u_50V_X7R_04
SY S10V
2200p_50V_X7R_04
SY S15V
1
ADJ
PR124
*0_04
4
Ra
PR125
*200K_1%_04
S
PQ26
MTN7002ZHS3
VDD3_LID
VIN1 VDD3_LID
S
PC144
PR121
*1u_10V_06
100K_04
PR126
G
Vout=1.24(1+Ra/Rb)
Rb
C
D
5 G
S
8mil
D
PQ25B
RT3K44M
3
PJ17
2
GND
EN
VDD3_LDO
5
*G922T11U
4
*100K_04
S
VIN VOUT
2200p_50V_X7R_04
PQ28
VDD3_STBY
UT3409G-AE3-R
D
D
3.3V
PQ30
UT3409G-AE3-R
S
D
PQ29
VDD3
UT3409G-AE3-R
S
PROTECT THE
LDO3 OF UP6182
PR120
100K_04
B
[10] POK
PQ32
DTC114EUA
B
*120K_1%_04
PQ33
DTC114EUA
4/15
E
6
PR114
3
D
PU10
PC125
C
1
2
2 G
1
[15,17] DD_ON
VIN
PR122
0_04
G
EN_5V
100K_04
VREG3
PC143
*0.01u_50V_X7R_04
EN_3V
PR115
PQ25A
RT3K44M
PR106 stuff 19.6K Voutput 5.1V
PR106 stuff 20K Voutput 5.04V
SY S5V
PD12
BAT54SWGH
A 1
3 C
A 2
P0317
10u_6.3V_X5R_06
1/21
RENAM E U17 TO PU10
[12]
Sheet 18 of 26
PWR VDD3, 3.3V,
5V, SYS 15V
PC130
1/21
RENAM E D15 TO PD12
DD_ON#
*100K_04
4/15
19.6K_1%_04
PD11
BAT54SWGH
A 1
3 C
A 2
*2.2_06
VREG5
VDD3_LID
PR109
2.2_06
VREG5
PD7
C
OPEN-3mm
PR106
1/21
RENAM E D14 TO PD11
VREF
VIN
30K_1%_04
2
G
PR118
1
E
20K_1%_04
+
G
680K_1%_04
EN_ALL
PR99
5V
PJ15
5A
Ra
P0314
PR117
PR104
25
15
4
VC LK
LDO5
PQ10B
PD1503YVS
LGATE1
VIN
LGATE2
3
GND PAD
GND
SKIPSEL
12
P0304
4/15
SYS5V
PL1
4.7UH_6.8*7.3*3.5
1
2
PC133
0.1u_16V_Y5V_04
21
SYS5V
PC61
150u_6.3V_V_A
PHASE1
PC132
0.1u_25V_X7R_06
P0306
5
6
PHASE2
22
PC63
4.7u_25V_X5R_08
P0312
2
P0311
1
EN 1
VFB1
VREF
TONSEL
3
P0310
5
UGATE1
POK
PC62
4.7u_25V_X5R_08
11
UP6182
UGATE2
PR108
1K_04
23
PC123
100p_50V_NPO_04
P0303
BOOT1
24
PC65
0.1u_50V_Y5V_06
10
VO1
POK
VIN
1
2
P0302
PQ10A
PD1503YVS
PU7
LDO3
BOOT2
100K_1%_04
7
9
VFB2
EN 2
6
PC129
1000p_50V_X7R_04
PC135
0.1u_25V_X7R_06
P0301
VO2
PR107
EN_5V
6
5
7
8
EN 0
13K_1%_06
7
13
PR97
4
+
PC122
100p_50V_NPO_04
OPEN-3mm
5A
PC66
150u_6.3V_V_A
1
PC126
0.1u_16V_Y5V_04
2
8
PL2
4.7UH_6.8*7.3*3.5
1
2
120K_1%_04
EN_3V
P0313 14
SY S3V
PJ8
PR103
PC64
1u_10V_06
[12,16,17,19,20,21] VIN
[17]
VIN1
[17]
[11,12,17,19,20,21]
[15]
[10,12,13,15,16,17]
[2,8,10,11,12,13,17,19]
SYS15V
5V
VDD3_LID
VDD3
3.3V
PWR VDD3, 3.3V, 5V, SYS 15V B - 19
B.Schematic Diagrams
POWER CHANGE
3.3V
PC131
10u_6.3V_X5R_06
VREG3
2
1
PC140
4.7u_25V_X5R_08
VIN
PR98
*10mil_short
*0_04
4
PR105
Schematic Diagrams
PWR 1.5V, 0.75V
VIN
5V
P0411
4
0.1u_10V_X7R_04
5
P0403
*10mil_short
P0404
6
P0405
8
PR49
5V
4/15
MOD E
CS
PVCC5
VCC5
VTTREF
COMP
PGOOD
VD DQSNS
S5
VD DQSET
S3
7
18
17
PQ18B
PD1503Y VS
+
5.1_06
16
PR73
P0412
15
14
P0413
10K_1%_04
5V
1.5V
5A
1
PJ13
2
OPEN -3mm
PC114
1000p_50V_X7R _04
PR68
13
11
2.2_06
3.3V
10
PR59
FOR DDR3
100K_04
1.5V_PWRGD [10]
PR55
10K_1%_04
P0407
* 10K_1%_04
FOR DDR3
PR 54
10K_04
PR63
3
PR52
P0417
G 5
PQ6B
RT3K44M
100K_04
6
5V
1
D
PJ2
8mil
S
1
S
2
PQ5
MTN7002ZHS3
5V
D
4
D
G
S
SUSBL
10K_04
1.5V_EN
PC 33
0. 01u_50V_X7R_04
VTT_EN
PC 34
0. 01u_50V_X7R_04
PR48
5V
FOR DDR3
2/8
FROM 14K_1%_04
CHANGE TO 14.3K_1%_04
10K_1%_04
[ 17,20]
VDD Q
PR94
4
PGND
C S_GND
NC
PC 39
PR 60
*1000p_50V_X7R _04
P0406
9
GND
PC 111
4.7u_25V_X5R _08
PC 110
0.1u_50V_Y5V_06
1
2
7
PR 74
*15mil_short
FOR DDR3
PL8
1.5U H_7*7*3.5
1
2
PC117
0.01u_50V_X7R _04
P0410
2/26
CHANGE SIZE
PC 116
0.1u_16V_Y5V_04
20
19
PQ18A
PD1503Y VS
P04148
PC113
560u_2.5V_6.6* 6.6*5.9
DRVL
PR 75
*15mil_short
P0416
P0402
PC35
* 1000p_50V_X7R_04
VTTSNS
P0409
P04153
PC41
PR56
LL
21
PC 44
1u_10V_06
*0_04
VTTGND
P0408
PC 40
1u_10V_06
*0_04
PR69
DRVH
22
GN D
Sheet 19 of 26
PWR 1.5V, 0.75V
PR64
VTT
NC
5V
VBST
PR50
* 10m il_short
2
VLDOIN
5
6
1
P0401
*10mil_short
*10_04
VD DQ
PC45
0.1u_25V_X7R_06
C
24
3
PR70
PD6
R B0540S2
25
OPEN -2mm
3A
PR 71
*10m il_s hort
1
PC47
10u_6.3V_X5R _06
PJ5
PC 48
10u_6.3V_X5R _06
PC49
10u_6.3V_X5R _06
23
VTT
2
B.Schematic Diagrams
PU5
UP6163
12
VTT_MEM
5V
A
PC46
10u_6.3V_X5R _06
VDDQ
G 2
PQ6A
R T3K44M
SU SC#
[10, 15]
[12,16,17,18,20,21] VIN
[11,12,17,18,20,21] 5V
[2,8,10,11,12,13,17,18] 3.3V
[20]
[4,5,6,17]
[6]
B - 20 PWR 1.5V, 0.75V
VDD Q
1.5V
VTT_MEM
Schematic Diagrams
PWR 0.89V, 1.05VS, 1.5VS
VIN
A
PC83
4.7u_25V_X5R_08
5V
PD2
VC C
FB
Rb
N.C
DL
PAD
2
P0506
7
5
6
P0505
3
4
17
4/15
1u_10V_06
1.91K_1%_04
Place CAP clos e to
SC412A pin 3th
OPEN -2m m
Vout=0.75(1+Ra/Rb)
Sheet 20 of 26
PWR 0.89V, 1.05VS,
1.5VS
A
PC86
*4.7u_25V_X5R_08
VIN
PD4
Rb
*0.01u_50V_X7R_04
7
5
6
P0513
PQ16B
*PD 1503Y VS
3
P0514
17
*1u_10V_06
*4.02K_1%_04
Place CAP clos e to
SC412A pin 3th
1.05VS
1
4/15
+
PC87
PR20
PR29
V1.05
2A
3
4
PN: 6-13-40211-28B
PC 21
PL6
*VMPI0503AR-3R 3M-Z02
1
2
PJ11
2
* OPEN-2m m
3/16
PC153
*0.1u_16V_Y5V_04
RTN
N.C
7
DL
PAD
2
3/5
RESERVE
4/15
*0.1u_25V_X7R _06
P0512
5
FB
GND
VC C
PC88
1
4
16
15
N.C
BST
VOUT
8
PC17
*20p_50V_NPO_04
Ra
LX
PGD
6
9
DH
14
13
10
P0508
N.C
P0509
N.C
EN
11
1.05VS_PWR GD
ILIM
12
PQ16A
*PD1503Y VS
8
P0511
PU3
*U P6127
*0.1u_16V_Y 5V_04
PC106
100u_2.5V_6.6*6.6*5.9
*RB0540S2
C
PC20
1
2
* 10K_1%_04
P0510
PR37
1.05VS_EN
PR19
*10mil_short
2
10K_1%_04
5V
[17] 1.05VS_PWRGD
PJ12
1
PC79
PR16
PR21
+
PQ15B
PD1503Y VS
3
P0507
0.89V_GFX
V0.89
3A
PC108
*0.1u_16V_Y5V_04
0.01u_50V_X7R_04
7
8
PC18
20p_50V_NPO_04
PR10
*10mil_short
PC 15
16
BST
VOUT
0.1u_25V_X7R_06
1
1/21
RENAME C169 TO PC153
Vout=0.75(1+Ra/Rb)
*10K_1%_04
5V
3/5
PC58
VDD Q
VOUT
VOUT
4
1u_10V_06
GND
VFB
2
PR76
Ra
1K_1%_04
P0515
PC54
82p_50V_NPO_04
AX6610
PN: 6-02-06610-320
PR77
Rb
1.05VS
2A
3/16
LDO_1.05VS
3
PC56
0.1u_16V_Y5V_04
PQ7
MTN7002ZHS3
VCNTL
EN
PC53
10u_6.3V_X5R_06
G
1
PC55
10u_6.3V_X5R_06
D
SUSBL
S
[17,19]
8
1.05VS_EN
VIN
VIN
POK
6
PC52
0.1u_16V_Y5V_04
100K_04
PC57
.22u_10V_X5R_04
PR78
5V
PU6
PC50
10u_6.3V_X5R_06
5
9
7
PC51
10u_6.3V_X5R_06
[17] 1.05VS_PWRGD
1
PJ6
2
OPEN-2mm
[12,16,17,18,19,21]
[11,12,17,18,19,21]
[11,12,13,14,15,17]
[2,8,10,11,12,13,17,18,19]
[2,3,5,6,7,8,9,10,11,12,13,14,15,17,21]
[19]
[2,5,7,9,10,11]
[5,8,11,17]
[5]
VIN
5V
5VS
3.3V
3.3VS
VDD Q
1.05VS
1.5VS
0.89V_GFX
3.01K_1%_04
PN: 6-13-11311-28C
Vout=0.8(1+Ra/Rb)
PWR 0.89V, 1.05VS, 1.5VS B - 21
B.Schematic Diagrams
Ra
15
PGD
GND
9
RTN
10
P0501
N.C
P0502
LX
POWER CHANGE
PL7
4.7U H_6.8*7.3*3.5
1
2
4/15
4
11
3.3VS
DH
EN
PC23
5
10K_04
6
PR9
N.C
12
N.C
[10] 0.89V_PWRGD
ILIM
13
14
0.1u_16V_Y 5V_04
PQ15A
PD1503Y VS
8
P0504
PU2
UP6127
PC109
0.1u_16V_Y5V_04
RB0540S2
C
PC12
PC107
560u_2.5V_6.6*6.6*5.9
P0503
10K_1%_04
1
2
PR15
1.05VS_PWR GD
Schematic Diagrams
PWR VCORE
VIN
RB0540S2
VCCA
CLKEN#
TG
PR43
*10K_04
7
5
6
32
31
30
29
28
27
26
25
VRT T#
BST
TG
DRN
BG
V5
CLKEN#
PWRGD
SC454
GND
PC43
24
23
22
21
20
19
18
17
EN_VCORE
P0605
DPRSLPVR
PR67
+
VCORE
8A
1
PJ9
2
OPEN-5mm
10K_04
SGND3
PM_DPRSLPVR [3,10]
PTH1
2
1
PR84
*10mil_short
VCCA
100K_NTC_06_B
TTRIP
CS+
CSVCCA
SGND3
PQ14B
PD1503YVS
3
1000p_50V_X7R_04
PR66
*499_1%_04
9
10
11
12
13
14
15
16
33
EN
RAMP
DPRSL
TTRIP
CS+
CSFB+
FB-
PU4
3.3VS
IMVP6_PWRGD [3,10]
HYS
CLSET
VR EF
AGND
VCCA
ERROUT
DAC
SS
VID6
VID5
VID4
VID3
VID2
VID1
VID0
DPRSTP#
PR40
*0_04
4.7K_04
4
PR46
*10mil_short
DPRSTP#
[2,10] H_DPRSTP#
VCORESENSE
PR92
PC104
10K_1%_04
VCORESENSE
10p_50V_NPO_04
1
HY S
PJ4
2
8mil
VSSSENSE
CLSET
SS
VREFVC
VSSSENSE [5]
PJ3
DAC
1
SGND3
ERROUT
PR44
PR45
130K_1%_04
130K_1%_04
2
VCCSENSE
VCCSENSE [5]
OPEN-1mm
CS1N
PR89
PC102
PR93
*0_04
PR72
17.4K_1%_04
PR91
28K_1%_04
PTH2
100K_NTC_06_B
1
P06012
PR88
100_04
CS+
PC103
0.015u_10V_X7R_04
DRN
VREFVC
SGND3
PR87
6.98K_1%_06
PC105
100p_50V_N PO_04
SGND3
PC101
68p_50V_N PO_04
150K_1%_04
100p_50V_NPO_04
PC38
0.01u_50V_X7R_04
P0609
PR47
PC36
1000p_50V_X7R_04
PC31
*100p_50V_N PO_04
PC100
180p_50V_NPO_04
30.1K_1%_04
PC28
100p_50V_NPO_04
PR39
PC30
1000p_50V_X7R_04
887_1%_06
PC26
*100p_50V_N PO_04
SGND3
CSPC42
*100p_50V_NPO_04
PR65
100_04
P0602
PR57
*15mil_short
3.3VS
3.3VS
SGND3
SGND3
PC37
*0.1u_16V_Y5V_04
PR90
PR62
1K_04
100K_04
6
EN_VCORE
B - 22 PWR VCORE
5 G
2
PJ10
S PQ17B
RT3K44M
PR131
1
D
1
3
[15] VCORE_ON
D
2 G
P0607
4
B.Schematic Diagrams
PR41
*0_04
H_VID6
H_VID5
H_VID4
H_VID3
H_VID2
H_VID1
H_VID0
PR61
CS1N
[2]
[2]
[2]
[2]
[2]
[2]
[2]
V_CORE
DR N
Sheet 21 of 26
PWR VCORE
PL5
1.5UH_7*7*3.5
1
2
4/15
BG
1
2
3
4
5
6
7
8
PQ14A
PD1503Y VS
8
DRN
P0606
3.3VS
2/26
CHANGE SIZE
SGND3
PC96
0.1u_16V_Y5V_04
*15mil_short
3.3VS
PC27
560u_2.5V_6.6*6.6*5.9
PR58
680_04
PC99
1u_25V_X7R _08
P0604
1
2
PR51
BST
1000p_50V_X7R_04
PC29
1u_10V_06
C
7/23
[7]
5.1_06
P0608
PC95
10_06
PC81
4.7u_25V_X5R _08
+
A
PC32
1u_10V_06
PR85
PR53
PD5
PC72
4.7u_25V_X5R _08
DRN
PC70
0.1u_50V_Y5V_06
EM I
PC145
*100u_25V
5V
8mil
S PQ17A
RT3K44M
3/9
*0_04
[12,16,17,18,19,20] VIN
[11,12,17,18,19,20] 5V
[2,3,5,6,7,8,9,10,11,12,13,14,15,17,20] 3.3VS
[5]
VCORE_ON [15]
VCORE
Schematic Diagrams
CRT
E_3.3VS
1
2
E_RN3
2.2K_4P2R_04
4
E_DAC_DDCADATA
3
E_DAC_DDCACLK
1
2
E_RN2
2.2K_4P2R_04
4
CRT_DDCADAT
3
CRT_DDCACLK
E_5VS
E_C71
*10p_50V_NPO_04
E_C70
*10p_50V_NPO_04
E_C69
*10p_50V_NPO_04
*FCM1005MF-600T01_short
DAC_BLUE_R
E_L3
150_1%_04
E_DAC_BLUE
150_1%_04
E_DAC_GREEN
*FCM1005MF-600T01_short
DAC_GREEN_R
E_L2
150_1%_04
E_R27
[24] E_DAC_BLUE
*FCM1005MF-600T01_short
DAC_RED_R
E_L1
E_R25
[24] E_DAC_GREEN
E_DAC_RED
E_R26
[24] E_DAC_RED
CRT DAC Signal Group
CRT_RED,CRT_GREEN,CRT_BLUE
V GA RGB r es istors cols e to Connecter
Zo = 55 Ohm ? 5%
s ignal : 4 m ils
length < 500 m ils
10
[24] E_DAC_DDCADATA
11
[24] E_DAC_DDCACLK
13
[24] E_DAC_HSYNC
15
[24] E_DAC_VSY NC
1
E_5VS
2
E_3.3VS
CRT_GND
E_C65
Z2603
0.22u_10V_Y5V_04
E_C66
E_GND
PN: 6-20-14X20-015
108AH15FST04A4C3
DDC_OUT2
SY NC_IN1
SY NC_IN2
VCC_SY NC
SY NC_OUT1
SY NC_OUT2
VIDEO_1
VCC_VIDEO
VIDEO_2
VCC_DDC
VIDEO_3
BY P
GND
9
CRT_DDCADAT
12
CRT_DDCACLK
14
CRT_HSY NC
E_R21
33_04
CRT_HSYNC_R
16
CRT_VSYNC
E_R22
33_04
CRT_VSY NC_R
3
E_DAC_RED
4
E_DAC_GREEN
5
E_DAC_BLUE
6
LAYOUT NOTE:
IP4772CZ16
PN: 6-02-20090-B60
CM 2009-02QR
PN: 6-02-47721-B60
IP4772CZ16
E_GND
Re sis tor s < 500 m ils
to IP4772CZ16
Sheet 22 of 26
CRT
E_GND
CRT_DDCACLK
E_GND
E_GND
E_C5
1000p_50V_X7R_04
E_GND
DDC_OUT1
DDC_IN2
CRT_VSY NC_R
E_C4
220p_50V_NPO_04
CRT_GND
DDC_IN1
CRT_HSYNC_R
E_C53
220p_50V_NPO_04
E_GND
CRT_DDCADAT
GND1
GND2
FCM1005KF-102T02
E_L9
E_GND E_GND E_GND
E_C54
1000p_50V_X7R_04
1/14
RENAM E L1 TO E_L9
0.22u_10V_Y5V_04
DAC_RED_R
8
E_U2
E_GND
[24]
[24]
E_5VS
E_3.3VS
CRT B - 23
B.Schematic Diagrams
E_J_CRT1
108AH15FST04A4C3
1
9
DAC_GREEN_R 2
10
3
DAC_BLUE_R
11
4
12
5
13
6
14
7
15
8
7
E_3.3VS
E_C62
E_GND
0.22u_10V_Y5V_04
CRT
Schematic Diagrams
Card Reader (with LAN) JMB261
JMB261
E_VCC_CARD
E_GND
E_VCC_CARD E_RN1
10K_8P4R_04
8
1
7
2
6
3
5
4
E_GND
E_GND
E_GND
E_GND
LAN_MDIP1
LAN_MDIN1
E_3.3V
LAN_MDIP2
LAN_MDIN2
LANXOUT
E_DVDD
( > 20 m ils )
SWF2520CF-4R7M-M
For JMC251/261 only
E_3.3V
E_DVDD
E_VCC_CARD
SD_CD#
MS_INS#
LAN_LED2
Pin#7
XRSTN
3 IN 1 SOCKET SD/MMC/MS
E_BUF_PLT_RST# [24]
E_DVDD
E_LAN_WAKE#
[24]
P1
P2
P3
P4
P5
P6
P7
P8
P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19
P20
P21
P22
SD_CD#
SD_WP
SD_D1
SD_D0
3/12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
22p_50V_NPO_04
E_C45
E_R18
22p_50V_NPO_04
12K_1%_04
E_C39
E_C38
0.1u_10V_X7R_04
0.1u_10V_X7R_04
E_PCIE_RXP5_CARD [24]
E_PCIE_RXN5_CARD [24]
E_3.3V
E_DVDD
SD_D2
E_C8
E_PCIE_TXN5_CARD [24]
E_PCIE_TXP5_CARD [24]
E_GND
E_GND
E_VCC_CARD
E_GND
E_GND
E_GND
SD_BS
SD_CLK
SD_D1
SD_D0
PCIe Differential Pairs = 100 Ohm
Z 25 08
Z 25 07
R EG L X
Z2506
E_C43
L AN X IN
L A N XO U T
1M_04
1 FSX-8L_25MHz
0.1u_16V_Y 5V_04
E_CLK_PCIE_JMC261 [24]
E_CLK_PCIE_JMC261# [24]
E_GND
E_VCC_CARD
SD_D3
E_C7
E_ C 44
10 u_6 .3 V _X 5R _ 06
E_G N D
E_C 23
0 .1u_ 16 V _Y 5 V_04
E_3.3V
E_ GN D
MS_INS#
SD_D3
SD_BS
SD_CLK
E_3.3V
Pin#8
Pin#7
MPD
JMC261-LGCZ0A 7*7
E_X1 2
E_C 1 0
*1 0p_ 50 V_N PO _04
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
(LQFP 64)
MDIO13
MDIO14
CR1_LEDN
E_L4
REGLX
E_GND
RE XT
VD D X 33
XIN
XO U T
GN D
LX
F B12
VD D R EG
C L KN
CLKP
AVD D H
R XP
R XN
GN D
TX N
T XP
LAN_MDIP3
LAN_MDIN3
JMC251
JMC261
( > 20 m ils )
32
31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
E_ C 47
0. 1u_1 6V_Y 5V_ 04
E_DVDD
E_DVDD
E_R19
E_GND
Sw itching Regulator
GND
MDIO13
MDIO14
SMB_SDA/CR_LEDN
TESTN
VDDIO
VDD
VCC3O
CR_CD0N
CR_CD1N
SMB_SCL/LED2
CREQN
MPD
WAKEN
RSTN
AVDDX
E_C 46
1 0u_ 6. 3V _X 5 R _0 6
LAN_MDIP0
LAN_MDIN0
E_GND
LANXIN
E_GND
E _G N D
E_DVDD
LED0
LED1
VDD
GND
VIP_1
VIN_1
AVDD12
VIP_2
VIN_2
GND
AVDD33
VIP_3(NC)
VIN_3(NC)
AVDD12(NC)
VIP_4(NC)
VIN_4(NC)
E _ GN D
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
M D I O0
M DI O 1
M D IO 2
VD DIO
M D IO 3
M D IO4
M D IO 5
GN D
M D IO 6
M D I O7
VD D IO
M D IO 8
M D IO 9
M D IO 1 0
M D I O 11
M D IO 12
E_U1
E_GND
SD_D2
E_J_CARD_NOR1
CD_SD
WP_SD
DAT1_SD
DAT0_SD
WP GND_SD
VSS_SD
VSS_MS
BS_MS
CLK_SD
DAT1_MS
SDIO/DAT0_MS
VDD_SD
DAT2_MS
VSS_SD
INS_MS
DAT3_MS
CMD_SD
SCLK_MS
VCC_MS
CD/DAT3_SD
VSS_MS
DAT2_SD
0.1u_16V_Y 5V_04
For JM C251/261 only
PN: 6-20-G4000-026
1-081-400395-001
PN: 6-21-G4000-126
M SD019-C0-10A3
GND
GND
GND
GND
P23
P24
P25
P26
1-081-400395-001
E_GND
E_GND
E_GND
Place all capacitors closed to chip.
The subscript in each CAP incicates the pin number of
JMC251/JMC261 that should be closed to.
E_DVDD
Pin#8
RD+
RD-
RX+
RX-
RD_CT RX_CT
TD_CT TX_CT
16
15
14
11
MLMX0+
MLMX0MLMX1+
MLMX1-
Z2503
Z2504
MLMX1+_R
MLMX1-_R
MLMX2+
MLMX2MLMX3+
MLMX3-
MCT_0
MCT_1
P3012
E_C61
1000p_2KV_X7R_12
E_R 3
75_ 1% _ 04
3
6
NC
NC
12
13
E_J_RJ1
MLMX0+_R
MLMX0-_R
E_R 7
75_ 1% _ 04
CT
1
2
NC
NC
10
9
E_R 8
*7 5_1 % _04
LAN_MDIP1
LAN_MDIN1
TX+
TX-
E _R 9
* 75_1 % _ 04
Z2501
Z2502
4
5
TD+
TD-
E _R 1
7 5_ 1 % _04
7
8
1
2
3
6
4
5
7
8
DA+
DADB+
DB-
shield
shield
GND1
GND2
MLMX1-_R
MLMX1+_R
E_GND
DC+
DCDD+
DD130452-8
E_R30
0_04
E_LP3
*WCM2012F2S-161T03
1
2
4
E_R31
MLMX2-_R
MLMX2+_R
PN: 6-20-B4P00-008
130452-4
MLMX3-_R
3
MLMX1MLMX1+
0_04
E_LP2
*WCM2012F2S-161T03
1
2
4
4/15
E _GN D
E_L8
LAN_MDIP0
LAN_MDIN0
E _R 5
7 5_ 1 % _04
E_GND
E_ C 6 4
0 .1u_ 10 V _X 7 R _04
E_GND
3
E_LP1
*WCM2012F2S-161T03
1
2
Pin#2
MLMX2MLMX2+
MLMX3-
MCT_R
MLMX3+_R
E_GND
B - 24 Card Reader (with LAN) JMB261
4
EMI
3
E_C 3 6
0 .1 u_ 1 6V _Y5 V_0 4
E_ C 34
1 0u_6 .3V _X 5 R _0 6
E _G ND
E _G N D
E_ C 27
0. 1u_1 6V_Y 5V_ 04
Pin#38
E_G N D
E_C 3 1
0 .1 u_ 1 6V _Y5 V_0 4
E_ C 35
0. 1u_ 16V _Y 5 V_ 0 4
Pin#27
MLMX0+
0_04
*GST5009 LF-G
MLMX3+
[24]
E_3.3V
Pin#11
Pin#38
Reserv ed
Pin#45
Reserv ed
Pin#59
Reserv ed
E _ C 37
10 u_ 6 .3 V_X 5R _ 06
2
Pin#62
E _C 3 3
0 .1u_ 16V _Y5 V_0 4
1
E_R29
Pin#55
E_G N D
MLMX0+_R
Pin#55
E_ C 41
*0 .1u _16V _Y 5V_0 4
MLMX3-
Pin#51
E _G ND
MLMX2-
0_04
Pin#26
Pin#17
Reserv ed
E_3.3V
E _G N D
0_04
E_R2
Pin#17
MLMX0-
E _ C 26
*1 0u_6 .3 V _X 5 R _06
E_R6
MLMX3+
4/15
E_G N D
MLMX2+
E_R20
0_04
E_LP4
*WCM2012F2S-161T03
4
3
E _C 2 8
0 .1u_ 16V _Y5 V_0 4
MLMX0-_R
E _G ND
E_L3,E_LP4,E_LP8,
E_C61,E_C64,E_C72,
E_R1,E_R2,E_R3,E_R5,E_R6,E_R7
E_ C 22
0. 1u _ 16 V _Y 5 V_ 0 4
MCT_0
MCT_1
MCT_2
MCT_3
E_L1,E_LP2,E_LP3,E_LP4,E_LP7,
E_C55,E_C60,E_C61,E_C64,E_C74,
E_R1,E_R5,E_R9,E_R8
2/4
COST DOWN
E_ C4 2
* 1 0u_6 .3 V _X 5 R _06
15
18
21
24
F OR JMB261 10M/100M LAN PARTS
E _G ND
MCT4
MCT3
MCT2
MCT1
MLMX2+_R
MLMX2-_R
MLMX3+_R
MLMX3-_R
FOR JMB251 GIGA LAN PARTS
E _G N D
TCT4
TCT3
TCT2
TCT1
19
20
22
23
NOTICE:
E_C 2 9
* 0. 1u_16V_Y 5V_04
MX2MX2+
MX1MX1+
MLMX0+_R
MLMX0-_R
MLMX1+_R
MLMX1-_R
E _ C4 0
0 .1u _16 V_Y 5V_ 04
10
7
4
1
TD2TD2+
TD1TD1+
13
14
16
17
E _G N D
CT
6
5
3
2
MX4MX4+
MX3MX3+
E_G N D
LAN_MDIP2
LAN_MDIN2
LAN_MDIP3
LAN_MDIN3
TD4TD4+
TD3TD3+
E _GN D
LAN_MDIP0 12
LAN_MDIN0 11
9
LAN_MDIP1
LAN_MDIN1 8
E _C 2 4
0 .1u_ 16V _Y5 V_0 4
E_C 55
*0 .1 u_1 0V _X 7R _ 04
E_C 60
*0.0 1 u_ 50V _X 7 R _0 4
E_GND
E_G N D
E_L7
E_GND
E_ C 72
*0 .0 1 u_ 50V _X7 R _0 4
B.Schematic Diagrams
75_1%_04
Near Card Reader CONN
SD_WP
SD_BS
MDIO13
LAN_LED0
LAN_LED1
Sheet 23 of 26
Card Reader (with
LAN) JMB261
M DIO Single End
= 50 Ohm
E _C 1 1
4 .7u_ 6.3 V_ Y 5V _06
MS_INS#
SD_CLK
E _C 9
* 0. 1u _16 V_Y 5V_0 4
4.7K_04
E_R15
E _ C 32
*0 .1 u_16 V_Y 5V_0 4
E_R17
SD _W P
M D IO7
SD_CD#
E_3.3V
SD _D 3
SD _B S
Z 25 09
4.7K_04
SD _D 0
SD _D 1
SD _D 2
E_R16
Card Reader Pow er
22_04
E_3.3V
E _ C 30
*0 .1 u_1 6V_ Y5V _0 4
E_R12
E_3.3V
M D IO 8
M D IO 9
M D I O1 0
M D I O 11
M D IO 1 2
SD_CLK
Pin#59
Schematic Diagrams
BTB, USB, CCD, PWR SW
USB PORT_0&1
CONN. FOR CONT TO M/B
E_USBVCC
2
E_USB_PP0
4
3
E_USB_PP0_R
3
E_R33
4/15
0_04
V+
DATA_L
DATA_H
GND
E_GND
GND1
GND2
GND3
GND4
E_PCIE_RXP5_CARD [23]
E_PCIE_RXN5_CARD [23]
E_GND
E_USBVCC
60mils
E_GND
E_R28
E_GND
Port 1
E_GND
E_R34
POWER SW CONN.
1
0_04
E_USB_PN1
1
2
E_USB_PN1_R
2
E_USB_PP1
4
3
E_USB_PP1_R
3
E_3.3VS
4
*WCM2012F2S-161T03
E_L5
E_R35
Sheet 24 of 26
BTB, USB, CCD,
PWR SW
*100K_04
0_04
E_C74
E_GND
E_J_USB2
V+
317DE04PSA5A2C
+
DATA_L
DATA_H
GND
4/15
*0.1u_16V_Y5V_04
E_GND
E_GND
E_J_SW1
1
2
3
E_BTN#
E_C73
88266-03001
*0.1u_16V_Y5V_04
CCD CONN.
E_GND
E_5VS
E_GND
E_C68
1u_6.3V_X5R_04
1A
Z2601
E_R23
20K_1%_04
E_R24
100K_04
E_GND
D
Z2602
G
S
E_CCD_EN
E_C67
4.7u_6. 3V_Y5V_06
E_C63
1u_10V_06
2/25
CHANGE FROM
4.7u_6.3V_Y5V_06 TO
1u_10V_06
E_5VS_CCD
E_Q4
UT3409G-AE3-R
S
D
1A
G
E_GND
PN: 6-20-63130-103
88266-03001
E_GND
E_R4
*220_04
2/24
CHANGE FROM
100K_04 TO *220_04
COST DOWN
E_J_CCD1
E_GND
E_USB_PN7
E_USB_PP7
E_Q3
MTN7002ZHS3
From H8 default HI
1
2
3
4
5
88266-05001
E_GND
PN: 6-20-63100-105
E_GND
E_H3
E_H5
H3_0B5_0D2_0 H3_0B5_0D2_0
E_GND
E_GND
E_H2
H6_5D2_3
E_H4
H6_5D2_3
E_GND
E_GND
E_H1
MTH8_0D2_3B6_5
2
9
3
8
4
7
1
5
6
E_GND
[22]
[23]
[22]
E_5VS
E_3.3V
E_3.3VS
BTB, USB, CCD, PWR SW B - 25
B.Schematic Diagrams
E_CLK_PCIE_JMC261 [23]
E_CLK_PCIE_JMC261# [23]
PN: 6-21-C4700-217 E_GND
QPOFZ34R2BS02K
3/1
RESERVE E_C74 FOR EMI
4
*WCM2012F2S-161T03
E_L6
E_J_USB1
PN: 6-20-B4R20-004
US04036BAA057
E_USB_PN0_R
317DE04PSA5A2C
2
PN: 6-20-B4R30-004
317DE04PSA5A2C
1
shield
shield
shield
shield
E_USB_PN0
E_PCIE_TXP5_CARD [23]
E_PCIE_TXN5_CARD [23]
QPOFZ34R2BS02K
E_GND
1
0_04
shield
shield
shield
shield
E_BTN#
Port 0
E_GND
E_R32
GND1
GND2
GND3
GND4
E_DAC_RED
E_DAC_GREEN
E_DAC_BLUE
E_DAC_HSYNC
E_DAC_VSYNC
E_DAC_DDCADATA
E_DAC_DDCACLK
E_GND
E_GND
E_C6
0.1u_16V_Y5V_04
[22]
[22]
[22]
[22]
[22]
[22]
[22]
E_USB_PN7
E_USB_PP7
E_USB_PN0
E_USB_PP0
E_USB_PN1
E_USB_PP1
E_C57
0.1u_16V_Y5V_04
[23] E_BUF_PLT_RST#
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
+
E_C58
*100u_6.3V_B_A
E_CCD_EN
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
60mils
E_C56
0.1u_16V_Y5V_04
E_J_BTB1
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
E_GND
[23] E_LAN_WAKE#
E_3.3V
E_C59
100u_6.3V_B_A
E_3.3VS
E_C52
0.1u_16V_Y5V_04
3/12
E_5VS
E_C51
0.1u_16V_Y5V_04
E_USBVCC
Schematic Diagrams
Click Board
C_5VS
C_J_TP1
Sheet 25 of 26
Click Board
C _C 3
22p_50V_N PO _04
PN: 6-20-94A20-112
87151-1207G
C_SW1
SFKQRMP2125T
1
2
3
4
C_GND
C_J_TP2
1
2
3
4
C_TP_DATA
C_TP_CLK
C_GND
C_H2
C_H3
H8_0B5_5D2_3 H8_0B5_5D2_3
C_GND
C_GND
C_H1
H3_0D2_0
C_H4
H3_0D2_0
C_GND
C_GND
C_SW2
SFKQRMP2125T
1
2
3
4
CTPBUTTON_L
C_J_TP2
4
C_GND
C_SW1~2
1
85201-04051
C_GND
RIGHT KEY
12/22
RENAME
PDA BUG-7
5
6
10K_04
C_TP_CLK C_GND
C_TP_DATA
87151-1207G
B - 26 Click Board
C_R1
5
6
10K_04
LIFT KEY
C _C 5
0.1u_16V _Y 5V _04
C_R2
C _C 4
22p_50V_N PO _04
B.Schematic Diagrams
12
CTPBUTTON_R
C _C 1
*10u_6.3V _X 5R _06
1
C_5VS
CTPBUTTON_L
C _C 2
0 .1 u _ 1 6 V _ Y 5 V _ 0 4
C_J_TP1
1
2
3
4
5
6
7
8
9
10
11
12
PN: 6-20-94A50-104
85201-04051
2
1
4
3
C_GND
12/22
RENAME
PDA BUG-7
CTPBUTTON_R
Schematic Diagrams
Power Button Board
S_3.3VS
S_3.3VS
POWER BUTTON
2
4
1
3
S_J_SW1
3
1
2
3
S_BTN#
S_R1
470_04
S_POWER_LED_1
85205-03701
PN: 6-20-51130-103
85205-03701
S_GND
PN: 6-20-51140-103
3801-E03N-01R
2/8
FROM 220_04
CHANGE TO 470_04
3
S_D1
RY-SP110DNB74-5/1X
Sheet 26 of 26
Power Button
Board
S_GND
S_H2
S_H1
H5_0D2_3 H4_0D1_6B0
S_GND
S_GND
Power Button Board B - 27
B.Schematic Diagrams
PTCF-V-T/R
S_GND
1
1
4
S_SW1
2
2
B.Schematic Diagrams
Schematic Diagrams
B - 28 Power Button Board
BIOS Update
Appendix C:Updating the FLASH ROM BIOS
To update the FLASH ROM BIOS you must:
•
•
•
•
•
•
•
Download the BIOS
1. Go to www.clevo.com.tw and point to E-Services and click E-Channel.
2. Use your user ID and password to access the appropriate download area (BIOS), and download the latest BIOS files
(the BIOS file will be contained in a batch file that may be run directly once unzipped) for your computer model
(see sidebar for important information on BIOS versions).
Unzip the downloaded files to a bootable CD/DVD/ or USB Flash drive
1. Insert a bootable CD/DVD/USB flash drive into the CD/DVD drive/USB port of the computer containing the
downloaded files.
2. Use a tool such as Winzip or Winrar to unzip all the BIOS files and refresh tools to your bootable CD/DVD/USB
flash drive (you may need to create a bootable CD/DVD with the files using a 3rd party software).
BIOS Version
Make sure you download the latest correct
version of the BIOS appropriate for the computer model you are
working on.
You
should
only
download BIOS versions
that
are
V1.01.XX or higher as
appropriate for your
computer model.
Note that BIOS versions
are not backward compatible and therefore
you may not downgrade your BIOS to an
older version after upgrading to a later version (e.g if you upgrade
a BIOS to ver 1.01.05,
you MAY NOT then go
back and flash the BIOS
to ver 1.01.04).
Set the computer to boot from the external drive
1. With the bootable CD/DVD/USB flash drive containing the BIOS files in your CD/DVD drive/USB port, restart the
computer and press F2 (in most cases) to enter the BIOS.
2. Use the arrow keys to highlight the Boot menu.
3. Use the “+” and “-” keys to move boot devices up and down the priority order.
4. Make sure that the CD/DVD drive/USB flash drive is set first in the boot priority of the BIOS.
5. Press F10 to save any changes you have made and exit the BIOS to restart the computer.
C - 1
C:BIOS Update
Download the BIOS update from the web site.
Unzip the files onto a bootable CD/DVD/USB Flash Drive.
Reboot your computer from an external CD/DVD/USB Flash Drive.
Use the flash tools to update the flash BIOS using the commands indicated below.
Restart the computer booting from the HDD and press F2 at startup enter the BIOS.
Load setup defaults from the BIOS and save the default settings and exit the BIOS to restart the computer.
After rebooting the computer you may restart the computer again and make any required changes to the default BIOS
settings.

BIOS Update
Use the flash tools to update the BIOS
1. Make sure you are not loading any memory management programs such as HIMEM by holding the F8 key as you
see the message “Starting MS-DOS”. You will then be prompted to give “Y” or “N” responses to the programs
being loaded by DOS. Choose “N” for any memory management programs.
2. You should now be at the DOS prompt e.g: DISK C:\> (C is the designated drive letter for the CD/DVD drive/USB
flash drive).
3. Type the following command at the DOS prompt:
C:BIOS Update
C:\> Flash.bat
4. The utility will then proceed to flash the BIOS.
5. You should then be prompted to press any key to restart the system or turn the power off, and then on again but
make sure you remove the CD/DVD/USB flash drive from the CD/DVD drive/USB port before the computer
restarts.
Restart the computer (booting from the HDD)
1. With the CD/DVD/USB flash drive removed from the CD/DVD drive/USB port the computer should restart from
the HDD.
2. Press F2 as the computer restarts to enter the BIOS.
3. Use the arrow keys to highlight the Exit menu.
4. Select Load Setup Defaults (or press F9) and select “Yes” to confirm the selection.
5. Press F10 to save any changes you have made and exit the BIOS to restart the computer.
Your computer is now running normally with the updated BIOS
You may now enter the BIOS and make any changes you require to the default settings.
C-2