Download Untitled - Audioline
Transcript
OPERATION AUDIOLINE VR200 STARTING NEXT RECORDING DIRECTLY You can start the next recording directly while making the current recording. To do this, press the multi button once upwards. The current recording will be stopped and the next recording started immediately under a new number. DISPLAY REMAINING RECORDING TIME You can find out the remaining memory capacity during a recording. To do this, press and hold the FILE button and the display will show you the recording time remaining in minutes and seconds. DIRECT RECORDING To start recording directly even when the unit is switched off, press the REC button for 2 seconds. VOS – VOICE CONTROLLED RECORDING The voice controlled recording mode (Voice Operated System) can be switched on using the VOS slide switch on the left-hand side of the unit. When VOS is switched on (slide switch in the direction of the arrow), any pauses that may occur during recording will not be recorded. When not speaking, the AUDIOLINE VR200 switches the recording to Pause (display shows “SENSE”). On speaking again, the unit automatically continues recording. When VOS is switched off, recording takes place continuously. 26