1
Download Xerox 128 Printer User Manual
Transcript
Technical information Stock Reliable feeds may be expected Weight Substance 16 to 110 (60 to 200 g/m2) Capacity 550 sheets, substance 20 (75 g/m2) Type or condition Xerographic bond paper in good condition Drilled stock, fanned thoroughly Less reliable feeds may be expected Suggested alternatives Weights outside the limits shown are not recommended. Substance 110 (200 g/m2) must be long grain except 17 x 11 inch (432 x 279 mm) substance 110 (200 g/m2) which must be short grain. Slightly curled paper Intermixed weights Xerox vellum Full cut tabs Label stock Adhesive drafting film Paper with reinforced edges Do not use excessively curled paper Substance 110 (200 g/m2) must be long grain. Do not use short grain. Refer to the “Using various stocks” section for any stock not defined in this guide. Table 5-3. Satisfaction guide for paper trays 3, 4, 5, and 6 NOTE: High volume printer configuration only Stock Reliable feeds may be expected Less reliable feeds may be expected Suggested alternatives Size 8 x 10 inches to 17 x 11 inches (203 x 254 mm to 432 x 279 mm) Smaller or larger sizes cannot be used. Weight Substance 16 to 110 (60 to 200 g/m2) Weights outside the limits shown are not recommended. Substance 110 (200 g/m2) must be long grain except 17 x 11 inch (432 x 279 mm) substance 110 (200 g/m2) which must be short grain. Capacity 2600 sheets, substance 20 (75 g/ m2) 5- 6 DocuTech 128/155/180 HighLight Color Operator Guide
