Download Raritan Computer DKX2-0E

Chapter 13: KX II Local Console
Factory Reset (KX II Local Console Only)
Note: This feature is available only on the Dominion KX II Local Console.
The Dominion KX II offers several types of reset modes from the Local
Console user interface.
Note: It is recommended that you save the audit log prior to performing a
factory reset. The audit log is deleted when a factory reset is performed and the
reset event is not logged in the audit log. For more information about saving the
audit log, please refer to Audit Log (on page 157).
¾
To perform a factory reset:
1.
Select Maintenance > Factory Reset. The Factory Reset page opens:
Figure 95: Factory Reset (Local Console Only)
2.
Select the appropriate reset option.
•
Full Factory Reset: Removes the entire configuration and resets the
unit completely to the factory defaults. Please note that any
management associations with CommandCenter will be broken.
Because of the complete nature of this reset, you will be prompted to
confirm the factory reset.
•
Network Parameter Reset: Resets the network parameters (from
Device Settings > Network Settings) of the unit back to the default
values:
IP auto configuration
IP Address
185