Download Oki 4100 Printer User Manual

15/1/97 9:37 am
Page 53
Service Function Settings List
LONG DOC. SCAN: Normally, your fax machine will
not scan documents longer than 360 mm. When this
function is on, your fax machine will scan and transmit documents of any length for up to one hour.
When using this feature, keep in mind that multiple
document mis-feeds will not be detected.
MDY/DMY: This function controls how your fax
machine displays and prints the date (month / day /
year or day / month / year).
TIME/DATE PRINT: This function controls how the
time and date are printed on the fax messages which
you transmit. Your fax machine can be set to not
print the time and date, to print it at the top the first
page only, or to print it at the top of every page.
TEL/FAX SWITCH: When this function is on, the telephone/fax [T/F] answering mode is available, which
allows your fax machine to automatically distinguish
between incoming voice and fax telephone calls.
MONITOR CONT.: This function controls the line
monitoring sounds you hear while your fax machine
is dialling and all fax communication sounds.
Available settings are on and off.
REAL TIME DIAL: This function controls how you
can dial telephone numbers on your fax machine.
Normally, your fax machine waits for you to enter
an entire telephone number and press Start before
dialling.
TSI PRINT: When this function is on, the telephone
number of the fax machine sending you a fax message
is printed at the top of each page of the message.
When this function is set to type 1, you can dial
immediately (digit by digit) whenever you pick up
the handset. When this function is set to type 2, you
can dial immediately whenever you pick up the
handset or press the Hook key. Available settings
are off, type 1 and type 2.
NO TONER MEM. RX: When this function is turned
on, your fax machine will automatically receive messages in memory when it is low on toner.
TONE FOR ECHO: This function compensates
for poor overseas line conditions. Available settings
are on and off.
TAD MODE: This function allows an answering
machine to operate on the same line as your fax
machine.
MH ONLY: This function controls the type of
compression method your fax machine uses during
communication. Adjusting may also help in poor line
conditions. Available settings are on and off.
Programming
53
English
4100 Fax ENGLISH