Download National Instruments GPIB
Transcript
Preface Organization of the Manual This manual is divided into the following chapters: Chapter 1, Description of the GPIB-100A, contains a brief description of the GPIB-100A Bus Extender and how it is used. This section also lists all components and accessories. In addition, it provides system configuration, performance, operating, electrical, environmental, and physical specifications for the GPIB-100A. Chapter 2, Installation, contains instructions for configuring and connecting the GPIB-100A into your system at your operating voltage. Chapter 3, Configuration and Operation, describes how to configure and operate a GPIB-100A system. Chapter 4, Theory of Operation, contains descriptions of how the GPIB-100A circuitry operates. Appendix A, Operation of the GPIB, describes GPIB terminology and protocol for users unfamiliar with the GPIB. Appendix B, Schematic Diagram, contains a detailed schematic diagram of the GPIB-100A. Appendix C, GPIB-100A Parts Locator Diagram, contains the parts locator diagram for the GPIB-100A. Appendix D, Cable Assembly Wire List, contains the listing of wire connections for the GPIB-100A transmission cable. Appendix E, Multiline Interface Messages, contains an ASCII chart and a list of the corresponding GPIB messages. Appendix F, Mnemonics Key, contains a mnemonics key that defines the mnemonics used throughout the manual. Related Document The following document is a reference that covers in greater detail specific topics introduced in this manual: • ANSI/IEEE Standard 488-1978, IEEE Standard Digital Interface for Programmable Instrumentation. © National Instruments Corporation v GPIB-100A User Manual