Download Multi-Tech Systems CDMA Wireless Modem Network Card User Manual

Chapter 17 – Extended AT Commands in IS707.3
Base Station IP Address +CBIP
Description:
This read-only command is used to display the base station’s temporary IP address. The
value displayed is in standard IP address format.
Note: This command returns an IP value only during a data call when a temporary IP
address has been assigned. When not in a data call, this command returns “OK”.
Syntax:
Command syntax: AT+CBIP
Command
AT+CBIP?
Note: Display the current setting
AT+CBIP?
Note: Display the current setting
AT+CBIP
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Possible Responses
+CBIP: 198.229.142.65
OK
Note: Command is valid
OK
Note: No IP address assigned.
ERROR
Note: Command is not valid
143