Download Multi-Tech Systems CDMA Wireless Modem Network Card User Manual
Transcript
Chapter 17 – Extended AT Commands in IS707.3 Request Manufacture Identification +GMI Description: The command is used to cause the DCE to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the DCE to identify the manufacturer. Syntax: Command syntax: AT+GMI Command AT+GMI? Note: Display the current setting. AT+GMI Note: Display the manufacturer Possible Responses ERROR Note: Command is not valid +GMI: MODEM OK Note: Command is valid Request Manufacture Identification +GMM Description: The command is used to cause the DCE to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the DCE to identify the specific model of device. Syntax: Command syntax: AT+GMM Command AT+GMM? Note: Display the current setting. AT+GMM Note: Display the model Possible Responses ERROR Note: Command is not valid +GMM: Model 72 OK Note: Command is valid Request Revision Identification +GMR Description: The command is used to cause the DCE to transmit one or more lines of information text, determined by the manufacturer, which is intended to permit the user of the DCE to identify the version, revision level or date, or other pertinent information of the device. Note: When there is no stored PRL, the value displayed for the PRL ID will be 0. Syntax: Command syntax: AT+GMR Command AT+GMR? Note: Display the current setting. AT+GMR Note: Display the revision Possible Responses ERROR Note: Command is not valid +GMR: S/W VER: WISMOQ WQ1.8, 10015 OK Note: Command is valid Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C 136