Download Lucent Technologies 555-233

DEFINITY Enterprise Communications Server Release 8.2
Upgrades and Additions for R8r 555-233-115
6
Issue 1
April 2000
Adding or Removing Cabinet Hardware
Add a Control Carrier (Add Duplication)
6-81
Save Translations
1. Log in at the management terminal.
2. Type save translation [spe-a] disk and press Enter. This command
instructs the system write all translation information from memory to disk.
3. If the PPN or an EPN (where PPN Port Carrier B will be relocated) contains
a TN750 Announcement circuit pack, type display announcements and
press Enter.
4. If administered recorded announcements are listed, type list
configuration software-version and press Enter. Check screen 2 to see
when the announcements were last saved. Save the current
announcements by typing save announcements disk and pressing Enter.
5. Type backup disk [spe-a] and press Enter. This instructs the system to
backup the current information on disk to the system tape.
6. Update backup tape, if required.
Label Cables
1. To make reconnecting the cables simpler and more reliable, label both
ends of the connector cables associated with the port carrier “B” to be
removed.
Shut Down DEFINITY LAN Gateway System
If a DEFINITY LAN Gateway system resides in the control cabinet to be
upgraded, prepare to shut down the DEFINITY LAN Gateway assembly and
allow the disk to completely spin down.
! CAUTION:
Before using this procedure to shut down the DEFINITY LAN Gateway,
make sure that you save the system parameters if you plan to reuse the
current system.
!
WARNING:
Neglecting to shut down a DEFINITY LAN Gateway assembly before
powering down the system cabinet where it resides can damage the LAN
Gateway disk.
1. Log onto the DEFINITY LAN Gateway. See DEFINITY Communications
System Generic 3 Installation, Administration and Maintenance of
CallVisor ASAI over the DEFINITY LAN Gateway for the procedure to log
in.
2. When the main menu appears, select Maintenance.