Download Lennox Hearth D2 Computer Drive User Manual

Getting to Know Your AIT Drive
LaCie d2 SCSI AIT Drive
page 8
6
6 – Lock Slot - This slot is used to connect a
Kensington-type anti-theft system for maximum
protection. Refer to your anti-theft system
documentation for details on how to connect
the lock.
7 – Rackmount Grooves - For mounting your
drive with the rackmount kit (sold separately).
8 – Serial Number Sticker
This is where you will find your LaCie drive's
serial number. Write down the serial number and
keep it in a safe place, because you will need to
provide the number in the event you have to call
LaCie Technical Support for any reason in regard to
the drive’s performance. The serial number would also
come in handy if your drive is lost or stolen.
7
7
8
1
Side View
1 – Rackmount Grooves - Used for mounting the drive’s
stand and for mounting your drive with the rackmount kit (sold separately).
2.3 SCSI Cables and Connectors
LaCie AIT drives are supplied with the following 68-pin to 68-pin SCSI
interfaces: AIT1 – Ultra2 LVD; AIT2 – Ultra2 LVD; and AIT3 – Ultra160 LVD
(also included with each of the drives is an LVD terminator). If the SCSI cable
supplied with your LaCie AIT drive does not meet your requirements, please
contact your computer supply specialist, who will be able to help you choose
the right SCSI cable for your particular setup and applications.
68-pin SCSI connector