Download Fujitsu Siemens Computers S60 Network Card User Manual

Operating and Indicator Elements
LED
HDD
READY
HDD
STATUS
Indication
OFF
The Front
Meaning
The associated drive is not (correctly)
inserted or it is spun down and it is not
being accessed.
The associated drive is spun down. The
drive is being accessed.
OFF
green intermittent
flashes
ON
The associated drive is spun up and ready.
green permanently on The drive is not being accessed or hot
spare drive.
ON
The associated drive is spun up and ready.
green intermittent
The drive is being accessed.
flashes
green,
The associated drive is spinning up or
flashes steadily
down (“prepare to remove” command: ca.
10 sec. flashes quickly 3 times per sec.,
followed from slowly flashes in 3 sec.
interval; see also section “Hot Swap for FC
HDD Modules” on page 42).
OFF
There is no hard disk fault.
yellow,
HDD error occurred.
permanently on
orange,
Drive identification.
flashes quickly
orange,
– Drive rebuild: all drives belonging to the
flashes quickly
pack blink synchronously.
– Error message from controller:
Critical LUN (Logical Unit Number)
– A drives was set on “Make Offline” and
the remaining HDD modules flash
quickly.
orange,
“Make Offline” state for the selected HDD
permanently on
modules.
Table 2: Meaning of the HDD Control LEDs Indication
U41221-J-Z156-1-74
19