Download D-Link DCS-5300G Automobile Electronics User Manual

Using the DCS-5300G with an Internet
browser (continued)
Configuration > Tools > Applications (Continued)
FTP put snapshots with
date and time suffix -
If the suffix is added, the captured date and time
can be easily differentiated from the snapshot file
name in either sequential or event operation. For
instance, “[email protected]” means
the JPEG image was captured at 4 minutes and
5 seconds after 3 o’clock, January 2nd, A.D. 2002.
If the suffix is omitted, the file named “video.jpg”
on the external FTP server will be refreshed at
the specified interval.
Click Apply to make
changes effective.
Configuration > Tools > Default
Click on the Default button to access factory setting restoration and camera
calibration options from the tools menu.
Click Default
Click Apply under Restore Factory Default to restore factory default settings.
This means any changes made will be lost and the system will be reset to the
initial status when shipped from the factory. After confirmation, the system will
restart and require the Installation Wizard software program to locate the IP
address of the DCS-5300G.
Click Apply under Calibrate to restore them camera’s factory lens position.
This means that the camera will be recalibrated to the default center to position
to recover from any external forces that may have affected it.
61